new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 12

Late-Layer Fusion is Enough: Dual-Path Vision Token Routing for Multimodal Large Language Models under Visual Saturation

Multimodal large language models (MLLMs) commonly inherit the deep, symmetric Transformer backbone designed for unimodal text modeling, and apply the same computation uniformly to image and language tokens. This design overlooks a key modality asymmetry: image and text tokens differ substantially in information density, redundancy, and required reasoning depth. Through a layer-wise analysis of LLaVA-1.5, we observe that vision tokens tend to saturate in the middle layers. Specifically, text-to-image attention decreases from 0.68 at layer 0 to 0.07 by layer 4, and stabilizes near 0.04 after layer 18, whereas text tokens continue to benefit from deep semantic processing. These findings suggest a mismatch between architectural symmetry and depth-asynchronous modality evolution, resulting in redundant visual computation and possible drift in perceptual representations during deep task-specific adaptation. Motivated by this, we propose Dual-Path Vision Token Routing (DPVR), a modality-asymmetric routing framework for efficient MLLMs. Its core instantiation, DPVR-LF (Late-Layer Fusion), routes vision tokens at the saturation point into a one-layer trainable side branch, runs a thirteen-layer text-only forward that skips image positions in the deep stack, and re-fuses the visual and textual streams only at the final layer. With approximately 3% trainable parameters, DPVR-LF preserves competitive multimodal performance on standard benchmarks while reducing visual computation in the deep Transformer stack. The results challenge the conventional assumption that vision tokens must traverse all deep language-model layers, and indicate that a single late fusion layer can be sufficient for maintaining strong perceptual competence in LLaVA-style MLLMs.

  • 2 authors
·
Jun 7 2

Architecture-Aware LLM Inference Optimization on AMD Instinct GPUs: A Comprehensive Benchmark and Deployment Study

We present a cross-architecture evaluation of production LLM inference on AMD Instinct MI325X GPUs, benchmarking four models spanning 235B to 1 trillion parameters across three architectural families (MoE+MLA, Dense+GQA, MoE+GQA) on an 8-GPU cluster with 2TB aggregate HBM3e using vLLM v0.14.1. Our results demonstrate that architecture-aware optimization is essential: MLA models require block size 1 and cannot use KV cache offloading, while GQA models benefit from both. The AMD AITER runtime is required for competitive MLA inference throughput and must be selectively disabled for architectures with incompatible attention head configurations. A controlled AITER ablation on Llama-3.1-405B (n=5 per condition) reveals a modest 3-5% throughput benefit at high concurrency but 2-16x higher measurement variability, confirming that AITER's large speedups target MoE/MLA kernels specifically. Under text-only workloads, Llama-405B and DeepSeek V3.2 achieve comparable peak throughput (15,944 and 15,343 tok/s) despite an order-of-magnitude difference in active parameters. Under vision workloads, Qwen3-VL-235B reaches 47,873 tok/s, 6.5x higher than Kimi-K2.5 (7,327 tok/s). Active parameter count per token is associated with inference throughput, though confounded by differences in quantization, AITER acceleration, and tensor parallelism. All four models exhibit a common throughput saturation point consistent with a memory-bandwidth bottleneck (~500 concurrent for short sequences, ~100-200 for longer sequences). All models maintain 100% HTTP-level success rates through 1,000 concurrent users, processing 18.9 million tokens across 17,406 requests without failures.

  • 1 authors
·
Feb 27

Scaling over Scaling: Exploring Test-Time Scaling Pareto in Large Reasoning Models

Large reasoning models (LRMs) have exhibited the capacity of enhancing reasoning performance via internal test-time scaling. Building upon this, a promising direction is to further scale test-time compute to unlock even greater reasoning capabilities. However, as we push these scaling boundaries, systematically understanding the practical limits and achieving optimal resource allocation becomes a critical challenge. In this paper, we investigate the scaling Pareto of test-time scaling and introduce the Test-Time Scaling Performance Model (TTSPM). We theoretically analyze two fundamental paradigms for such extended scaling, parallel scaling and sequential scaling, from a probabilistic modeling perspective. Our primary contribution is the derivation of the saturation point on the scaling budget for both strategies, identifying thresholds beyond which additional computation yields diminishing returns. Remarkably, despite their distinct mechanisms, both paradigms converge to a unified mathematical structure in their upper bounds. We empirically validate our theoretical findings on challenging reasoning benchmarks, including AIME, MATH-500, and GPQA, demonstrating the practical utility of these bounds for test-time resource allocation. We hope that this work provides insights into the cost-benefit trade-offs of test-time scaling, guiding the development of more resource-efficient inference strategies for large reasoning models.

  • 5 authors
·
May 26, 2025

Nexus:Proactive Intra-GPU Disaggregation of Prefill and Decode in LLM Serving

Monolithic serving with chunked prefill improves GPU utilization by batching prefill and decode together, but suffers from fine-grained phase interference. Engine-level prefill-decode (PD) disaggregation avoids interference but incurs higher hardware and coordination overhead. Prior intra-GPU disaggregation approaches multiplex prefill and decode within a single GPU, using SLO-based tuning guided by heuristics from offline profiling or reactive feedback loops. However, these methods respond reactively to performance issues rather than anticipating them, limiting adaptability under dynamic workloads. We ask: can we achieve proactive intra-GPU disaggregation that adapts effectively to dynamic workloads? The key challenge lies in managing the conflicting resource demands of prefill and decode under varying conditions. We first show that GPU resources exhibit diminishing returns -- beyond a saturation point, more allocation yields minimal latency benefit. Second, we observe that memory bandwidth contention becomes a critical bottleneck. These insights motivate a design that dynamically partitions GPU resources across prefill and decode phases, while jointly considering compute capacity, memory footprint, and bandwidth contention. Evaluated on diverse LLMs and workloads, our system Nexus achieves up to 2.2x higher throughput, 20x lower TTFT, and 2.5x lower TBT than vLLM; outperforms SGLang by up to 2x; and matches or exceeds disaggregated vLLM.

  • 4 authors
·
Jul 9, 2025

MAgICoRe: Multi-Agent, Iterative, Coarse-to-Fine Refinement for Reasoning

Large Language Models' (LLM) reasoning can be improved using test-time aggregation strategies, i.e., generating multiple samples and voting among generated samples. While these improve performance, they often reach a saturation point. Refinement offers an alternative by using LLM-generated feedback to improve solution quality. However, refinement introduces 3 key challenges: (1) Excessive refinement: Uniformly refining all instances can over-correct and reduce the overall performance. (2) Inability to localize and address errors: LLMs have a limited ability to self-correct and struggle to identify and correct their own mistakes. (3) Insufficient refinement: Deciding how many iterations of refinement are needed is non-trivial, and stopping too soon could leave errors unaddressed. To tackle these issues, we propose MAgICoRe, which avoids excessive refinement by categorizing problem difficulty as easy or hard, solving easy problems with coarse-grained aggregation and hard ones with fine-grained and iterative multi-agent refinement. To improve error localization, we incorporate external step-wise reward model (RM) scores. Moreover, to ensure effective refinement, we employ a multi-agent loop with three agents: Solver, Reviewer (which generates targeted feedback based on step-wise RM scores), and the Refiner (which incorporates feedback). To ensure sufficient refinement, we re-evaluate updated solutions, iteratively initiating further rounds of refinement. We evaluate MAgICoRe on Llama-3-8B and GPT-3.5 and show its effectiveness across 5 math datasets. Even one iteration of MAgICoRe beats Self-Consistency by 3.4%, Best-of-k by 3.2%, and Self-Refine by 4.0% while using less than half the samples. Unlike iterative refinement with baselines, MAgICoRe continues to improve with more iterations. Finally, our ablations highlight the importance of MAgICoRe's RMs and multi-agent communication.

  • 5 authors
·
Sep 18, 2024

Feature Attenuation of Defective Representation Can Resolve Incomplete Masking on Anomaly Detection

In unsupervised anomaly detection (UAD) research, while state-of-the-art models have reached a saturation point with extensive studies on public benchmark datasets, they adopt large-scale tailor-made neural networks (NN) for detection performance or pursued unified models for various tasks. Towards edge computing, it is necessary to develop a computationally efficient and scalable solution that avoids large-scale complex NNs. Motivated by this, we aim to optimize the UAD performance with minimal changes to NN settings. Thus, we revisit the reconstruction-by-inpainting approach and rethink to improve it by analyzing strengths and weaknesses. The strength of the SOTA methods is a single deterministic masking approach that addresses the challenges of random multiple masking that is inference latency and output inconsistency. Nevertheless, the issue of failure to provide a mask to completely cover anomalous regions is a remaining weakness. To mitigate this issue, we propose Feature Attenuation of Defective Representation (FADeR) that only employs two MLP layers which attenuates feature information of anomaly reconstruction during decoding. By leveraging FADeR, features of unseen anomaly patterns are reconstructed into seen normal patterns, reducing false alarms. Experimental results demonstrate that FADeR achieves enhanced performance compared to similar-scale NNs. Furthermore, our approach exhibits scalability in performance enhancement when integrated with other single deterministic masking methods in a plug-and-play manner.

  • 5 authors
·
Jul 5, 2024

BroRL: Scaling Reinforcement Learning via Broadened Exploration

Reinforcement Learning with Verifiable Rewards (RLVR) has emerged as a key ingredient for unlocking complex reasoning capabilities in large language models. Recent work ProRL has shown promise in scaling RL by increasing the number of training steps. However, performance plateaus after thousands of steps, with clear diminishing returns from allocating more computation to additional training. In this work, we investigate a complementary paradigm for scaling RL, BroR-Lincreasing the number of rollouts per example to hundreds to exhaustively Broaden exploration, which yields continuous performance gains beyond the saturation point observed in ProRL when scaling the number of training steps. Our approach is motivated by a mass balance equation analysis allowing us to characterize the rate of change in probability mass for correct and incorrect tokens during the reinforcement process. We show that under a one-step RL assumption, sampled rollout tokens always contribute to correct-mass expansion, while unsampled tokens outside rollouts may lead to gains or losses depending on their distribution and the net reward balance. Importantly, as the number of rollouts per example N increases, the effect of unsampled terms diminishes, ensuring overall correct-mass expansion. To validate our theoretical analysis, we conduct simulations under more relaxed conditions and find that a sufficiently large rollout size N-corresponding to ample exploration-guarantees an increase in the probability mass of all correct tokens. Empirically, BroRL revives models saturated after 3K ProRL training steps and demonstrates robust, continuous improvement, achieving state-of-the-art results for the 1.5B model across diverse benchmarks.

nvidia NVIDIA
·
Oct 1, 2025 2

Hierarchical Memorization in Large Language Models: Evidence from Citation Generation

Large language models (LLMs) generate fluent text across a wide range of tasks, but the fabrication of non-existent academic citations remains a critical and well-documented failure mode. Building on prior work that frames hallucination and verbatim memorization as outcomes of the same probabilistic process, this study uses citation count as a proxy for training data redundancy and asks how this redundancy is internally structured within a single bibliographic record. Using GPT-4.1, we generated and manually verified 100 citations across twenty computer-science domains, measuring factual fidelity via cosine similarity against authentic metadata. We find that (i) factual accuracy varies substantially across domains and scales log-linearly with citation count, (ii) the model crosses two empirically identifiable thresholds; an inflection around 90 citations and a saturation point near 1,200 citations beyond which records are reproduced nearly verbatim, (iii) memorization is hierarchical, with titles and first authors recalled earliest while venues and numeric fields require far greater redundancy and publication years remain essentially unlearned, and (iv) even highly cited records can be conflated when their titles and authors overlap, an effect interpretable as spurious-attractor interference. Memorization in LLMs is therefore not a binary on/off state but a graduated, hierarchically layered phenomenon shaped by the uneven distribution of knowledge in the pretraining corpus.

  • 1 authors
·
May 4

CW-BASS v2: Saturation-Aware Pseudo-Label Selection for Semi-Supervised Segmentation under Foundation-Model Teachers

Semi-supervised semantic segmentation has long turned on one question, which pseudo-labels to trust, and a generation of selection rules, dynamic thresholds, per-class curricula, soft confidence weights, answered it for the noisy, under-confident ResNet teachers of their day. Self-supervised foundation encoders change the regime: with a DINOv2 teacher, confidence saturates, so the filtering that helped a weak teacher can hurt a strong one. We propose CW-BASS v2, a saturation-aware pseudo-label selection method that reads the teacher's confidence regime rather than committing to one rule. It pairs held-out calibration, an unbiased per-class noise estimate, with a self-adaptive confidence floor that provably bounds retention away from 1, and combines them in a one-pass gate: measure the reliability of the teacher's confident set, pi_kept = Pr[correct | c >= tau], on a held-out slice, and filter strictly when it meets the confidence demanded (pi_kept >= tau), falling back to the adaptive floor otherwise. The boundary is the pre-existing operating threshold, not a value tuned to mIoU, and across six DINOv2 teachers it makes the correct strict-vs-floor call blind. CW-BASS v2 thus recovers the UniMatch V2 operating point on the saturated benchmarks by selecting strict (Pascal VOC 1/8 87.4 against its reported 87.9; Cityscapes within 0.5), and improves on it where the confident set is unreliable (pi_kept ~ 89%, ADE20K), where the floor edges ahead (+1.5 mIoU, single seed). The gate is principled because the failure it avoids is measured, not assumed: on a reliable, saturated teacher the confidence distribution's dynamic range collapses (98% of Pascal pixels >= 0.95), so an adaptive cutoff floods the retention mask and self-training decays into confirmation bias.

ebenworks Ebenworks
·
Aug 12 2

Geometry, Not Statistics: SaluNet for Normalization-Free CNNs and Transformers

Normalization stabilizes deep networks by adapting intermediate representations through prescribed centering and scaling rules. We investigate the complementary principle: leave representations in their original coordinates and adapt the geometry of the pointwise operator instead. Motivated by controlled evidence that Batch Normalization changes the learning dynamics of parametric activations, we introduce the Saturated Adaptive Linear Unit (SALU), a smooth bounded operator with two learned scalars per layer. A bijective reparameterization exposes its saturation amplitude S, transition width W, and central gain S/W. These coordinates control the bounded forward amplitude and distribute backward sensitivity over the input domain. In a homogeneous mean-field model, forward variance and backward gradient propagation share the normalized coordinate v/W^2, where v denotes the activation variance, while obeying distinct stability conditions. We reuse the same primitive to construct the SWALU and GALU adaptive gates and define SaluNet by replacing BN or LN with SALU and conventional activations with SALU-based gates. On CIFAR-100, controlled ResNet-18 experiments show that the complete SALU+SWALU construction outperforms its isolated substitutions. Additional experiments demonstrate trainability down to batch size one, while checkpoint-level representation analysis reveals a broader late-stage spectrum than in the matched BN+ReLU model. ImageNet-1K experiments further demonstrate scalability to ResNet-50 and ViT-B/16, including ViT-B/16 training with an effective batch size of 128. Together, these results support learnable pointwise geometry as a common statistics-free mechanism for signal stabilization and adaptive gating across convolutional networks and vision Transformers.

  • 1 authors
·
Oct 30

Softening holographic nuclear matter

Baryons in the holographic Witten-Sakai-Sugimoto model are described by instanton solutions on the flavor branes. A commonly used approximation for dense baryonic matter replaces the many-instanton solution by a simpler, spatially homogeneous, ansatz, which requires a discontinuity in the holographic direction of the non-abelian gauge field in order to account for topological baryon number. We point out that the simplest configuration with a single jump - often used in previous studies - results in matter at saturation density that is much stiffer than real-world nuclear matter. This is improved, although not completely remedied, by adding a second jump. We present a systematic discussion of all possible configurations up to four jumps, dynamically computing locations of and behavior at the discontinuities. We find solutions that continuously connect to those based on pointlike baryons, thus, for the first time, establishing a concrete link between the instantonic and homogeneous pictures. This is supported by translating the multi-jump profiles of the gauge field into gauge invariant multi-layer charge distributions. The most important of our novel configurations has a block-like structure in the bulk, becomes pointlike at low density and/or large coupling, and is energetically preferred over all previously studied configurations. Therefore, our work lays the ground for improved predictions from holography for dense nuclear matter in neutron stars.

  • 4 authors
·
Feb 10

Probabilistic Assessment of Engineered Timber Reusability after Moisture Exposure

Engineered timber is pivotal to low-carbon construction, but moisture uptake during its service life can compromise structural reliability and impede reuse within a circular economy model. Despite growing interest, quantitative standards for classifying the reusability of moisture-exposed timber are still lacking. This study develops a probabilistic framework to determine the post-exposure reusability of engineered timber. Laminated specimens were soaked to full saturation, dried to 25% moisture content, and subjected to destructive three-point flexural testing. Structural integrity was quantified by a residual-performance metric that assigns 80% weight to the retained flexural modulus and 20% to the retained maximum load, benchmarked against unexposed controls. A hierarchical Bayesian multinomial logistic model with horseshoe priors, calibrated through Markov-Chain Monte-Carlo sampling, jointly infers the decision threshold separating three Modern Methods of Construction (MMC) reuse levels and predicts those levels from five field-measurable features: density, moisture content, specimen size, grain orientation, and surface hardness. Results indicate that a single wet-dry cycle preserves 70% of specimens above the 0.90 residual-performance threshold (Level 1), whereas repeated cycling lowers the mean residual to 0.78 and reallocates many specimens to Levels 2-3. The proposed framework yields quantified decision boundaries and a streamlined on-site testing protocol, providing a foundation for robust quality assurance standards.

  • 5 authors
·
May 29, 2025

Phase Transition for Budgeted Multi-Agent Synergy

Multi-agent systems can improve reliability, yet under a fixed inference budget they often help, saturate, or even collapse. We develop a minimal and calibratable theory that predicts these regimes from three binding constraints of modern agent stacks: finite context windows, lossy inter-agent communication, and shared failures among similar agents. Each leaf agent is summarized by a compute-performance scaling exponent β; communication is captured by a message-length fidelity curve γ(m); dependence is captured by an effective shared-error correlation ρ; and a context window W imposes hard fan-in limits that make hierarchy necessary. For binary success/failure tasks with majority aggregation, we prove a sharp phase transition for deep b-ary trees with correlated inputs and lossy communication: a single scalar α_ρ (combining γ(m), ρ, and fan-in b) determines whether weak signal is amplified to a nontrivial fixed point or washed out to chance. In the amplifying regime, we derive an organization exponent s and show that budgeted synergy, i.e., outperforming the best single agent under the same total budget, occurs exactly when s>β, yielding closed-form compute allocation rules and explicit budget thresholds. We further characterize saturation via a mixing depth and provide a conservative clipped predictor that remains accurate across growth and saturation. A continuous-performance warm-up gives closed-form risks for star, chain, and tree organizations, making correlation- and communication-induced floors explicit and exposing the core design trade-offs in a smooth setting. Finally, we validate the predicted phase boundaries in controlled synthetic simulations and show how the same mechanisms explain the dominant bottlenecks reported in recent large-scale matched-budget studies of LLM agent-system scaling.

  • 3 authors
·
Jan 24

Gathered, Not Admitted: How Attention Brings a Latent Variable into Verbalizable Form

Language models hold latent quantities in a form they can report on, and more of a quantity is present in that form when the task requires reusing it flexibly. What causes a representation to enter that form is open, and the word workspace invites an admission story: a gate that decides what gets in. Testing it on open-weight models with Jacobian lenses, over a benchmark whose five arms share an identical context, we find no gate where it predicts one. Demand raises a concept's lens visibility beyond what applying an operator to a supplied value produces: +0.050 [+0.045, +0.057] in percentile rank on our primary checkpoint, positive on all four we measure, though that arm answers at ceiling and the accuracymatched contrast is stronger under that readout. At the same time one shared linear map decodes the variable from every arm, the control included, at 6.4-9.0x its selection-corrected floor. What produces the later readable form at the queried position is attention-mediated gathering inside a mid-depth window: separating patch depth from readout depth puts transport there at least 17x above anywhere shallower under non-saturating readouts, with no tested MLP output contributing positively inside it. Under the saturating percentile rank the same grid does not localise the window, which is a fact about that measure. An arm that needs the variable for nothing concentrates sevenfold less, so the window is demand-specific. That window has two measured edges, a survival failure below and destruction above, and it falls at the same fractional depth in a 64-layer hybrid and a 62-layer dense model from another family. We localise where the variable is installed and read, not the route from the passage, which transports nothing. But the readout is not a calibrated measure of use: three components move it to within 12% of one another and differ 7.4x in what they do to the answer.

An Idealized Delay-Differential Model of Scuba Diver Porpoising and Runaway Ascent

A scuba diver holding constant depth balances on an unstable equilibrium: the gas carried in the suit and buoyancy compensator compresses with depth, so the buoyant force falls as the diver sinks and rises as the diver ascends. We represent the diver as a proportional-derivative controller that regulates this compressible-buoyancy saddle after a finite reaction delay, and we derive the governing delay differential equation from the vertical force balance and the isothermal gas law, reducing it to a damping ratio, two control gains, and a dimensionless delay. The characteristic spectrum, obtained by pseudospectral collocation of the semigroup generator and checked against a direct Newton solution of the characteristic equation, locates the Hopf boundary that separates stable hovering from sustained porpoising; for the baseline diver the critical reaction delay is 3.36 s and the onset period is 28.8 s. The bifurcation is supercritical, and because the saturating force is the quadratic hydrodynamic drag, the limit-cycle amplitude grows in proportion to the delay excess rather than as its square root. The safe-operating envelope shows that runaway ascent is triggered by saturation of the compensator, not by loss of linear stability, so a stable and an unstable diver can share the same escape threshold. As onset is approached, the lag-one autocorrelation and variance rise while the fitted recovery rate falls and matches the spectral abscissa, giving an eigenvalue-exact early warning of the transition.

  • 8 authors
·
Aug 14

Learn What's Left, Not What's Mastered: Saturation Aware Advantage Reweighting for Multi-Reward Policy Optimization

Reinforcement learning (RL) with group-relative advantages has become the de facto standard for post-training language model reasoners. However, when optimizing multiple reward objectives, existing methods typically scalarize the reward vector with a fixed weighted sum before group-wise standardization. We show that this design leads to two fundamental problems: rollouts with distinct reward profiles can receive identical advantages, and all objectives are optimized with fixed relative weights regardless of their current level of saturation. As a result, training continues to allocate gradient budget to already-solved objectives instead of focusing on those with greater remaining headroom. We introduce Saturation Aware Advantage Reweighting for Multi-Reward Policy Optimization (SA-MRPO), which standardizes each reward objective independently and adaptively discounts its contribution according to a batch-level estimate of objective saturation. This dynamically reallocates optimization effort toward under-optimized objectives while empirically maintaining performance on those that are already well satisfied. We further show that saturation-aware reweighting can reverse the sign of an update, rather than merely rescale its magnitude. Across mathematical reasoning with two- and three-objective reward combinations, SA-MRPO improves the harder correctness objective over GDPO in 12 of 15 benchmark comparisons, with gains of up to 5% on AIME24. On adaptive reasoning it improves accuracy on all five benchmarks, by 3.8% on average and up to 9.2 % on AMC23, and on coding benchmarks it improves pass rate by up to 2.3%, while in all settings maintaining the easier objectives near their already satisfied levels.

Web-Bench: A LLM Code Benchmark Based on Web Standards and Frameworks

The application of large language models (LLMs) in the field of coding is evolving rapidly: from code assistants, to autonomous coding agents, and then to generating complete projects through natural language. Early LLM code benchmarks primarily focused on code generation accuracy, but these benchmarks have gradually become saturated. Benchmark saturation weakens their guiding role for LLMs. For example, HumanEval Pass@1 has reached 99.4% and MBPP 94.2%. Among various attempts to address benchmark saturation, approaches based on software engineering have stood out, but the saturation of existing software engineering benchmarks is rapidly increasing. To address this, we propose a new benchmark, Web-Bench, which contains 50 projects, each consisting of 20 tasks with sequential dependencies. The tasks implement project features in sequence, simulating real-world human development workflows. When designing Web-Bench, we aim to cover the foundational elements of Web development: Web Standards and Web Frameworks. Given the scale and complexity of these projects, which were designed by engineers with 5 to 10 years of experience, each presents a significant challenge. On average, a single project takes 4 to 8 hours for a senior engineer to complete. On our given benchmark agent (Web-Agent), SOTA (Claude 3.7 Sonnet) achieves only 25.1% Pass@1, significantly lower (better) than SWE-Bench's Verified (65.4%) and Full (33.8%) scores. Finally, we discuss that in any development field, Standards and Frameworks represent foundational knowledge and efficiency tools, respectively, and LLMs require optimization tailored to them.

  • 4 authors
·
May 12, 2025 1