Daily Papers

Post-training quantization (PTQ) and quantization-aware training (QAT) methods are gaining popularity in mitigating the high memory and computational costs associated with Large Language Models (LLMs). In resource-constrained scenarios, PTQ, with its reduced training overhead, is often preferred over QAT, despite the latter's potential for higher accuracy. Meanwhile, parameter-efficient fine-tuning (PEFT) methods like low-rank adaptation (LoRA) have been introduced, and recent efforts have explored quantization-aware PEFT techniques. However, these approaches may lack generality due to their reliance on the pre-quantized model's configuration. Their effectiveness may be compromised by non-linearly quantized or mixed-precision weights, and the retraining of specific quantization parameters might impede optimal performance. To address these challenges, we propose L4Q, an algorithm for parameter-efficient quantization-aware training. L4Q leverages LoRA-wise learned quantization step size for LLMs, aiming to enhance generality. The simultaneous quantization-and-fine-tuning process of L4Q is applicable to high-precision models, yielding linearly quantized weights with superior accuracy. Our experiments, conducted on the LLaMA and LLaMA2 model families using an instructional dataset, showcase L4Q's capabilities in language comprehension and few-shot in-context learning, achieving sub-4-bit precision while maintaining comparable training times to applying PEFT on a quantized model.

Quantization has been widely used to compress and accelerate inference of large language models (LLMs). Existing methods focus on exploring the per-token dynamic calibration to ensure both inference acceleration and model accuracy under 4-bit quantization. However, in autoregressive generation inference of long sequences, the overhead of repeated dynamic quantization and dequantization steps becomes considerably expensive. In this work, we propose MergeQuant, an accurate and efficient per-channel static quantization framework. MergeQuant integrates the per-channel quantization steps with the corresponding scalings and linear mappings through a Quantization Step Migration (QSM) method, thereby eliminating the quantization overheads before and after matrix multiplication. Furthermore, in view of the significant differences between the different channel ranges, we propose dimensional reconstruction and adaptive clipping to address the non-uniformity of quantization scale factors and redistribute the channel variations to the subsequent modules to balance the parameter distribution under QSM. Within the static quantization setting of W4A4, MergeQuant reduces the accuracy gap on zero-shot tasks compared to FP16 baseline to 1.3 points on Llama-2-70B model. On Llama-2-7B model, MergeQuant achieves up to 1.77x speedup in decoding, and up to 2.06x speedup in end-to-end compared to FP16 baseline.

Machine unlearning aims to remove specific knowledge (e.g., copyrighted or private data) from a trained model without full retraining. In practice, models are often quantized (e.g., 4-bit) for deployment, but we find that quantization can catastrophically restore forgotten information [1]. In this paper, we (1) analyze why low-bit quantization undermines unlearning, and (2) propose a quantization-aware unlearning method to mitigate this. We first compute weight-change statistics and bucket overlaps in quantization to show that typical unlearning updates are too small to cross quantization thresholds. Building on this insight, we introduce a logits space hinge loss: for each forget example, we force the output logits of the unlearned model to differ from the original model by at least a margin (half the quantization step). This ensures forgotten examples remain distinguishable even after quantization. We evaluate on language and classification tasks (including a Twitter misinformation dataset) and show our method preserves forgetting under 4-bit quantization, whereas existing methods almost entirely recover the forgotten knowledge.

Chunk-wise autoregressive video diffusion models rely on a KV cache of previously generated chunks to avoid redundant computation, but this cache quickly becomes a memory bottleneck as videos grow longer. Methods that quantize the KV cache to low bitwidths reduce memory pressure but degrade video quality. We show that a key driver of this degradation is a systematic bias in attention weights: due to the convexity of the exponential in softmax attention, quantization noise inflates the contribution of cached keys, a phenomenon we call the Jensen bias. This effect causes quantized keys to steal attention mass from the unquantized current chunk. We derive a per-attention-score correction that removes this bias in expectation, computed on the fly from the quantization step sizes of the cached keys and the query norm. Using a second-order Taylor approximation, the additional computational overhead is negligible, and no additional memory is needed alongside the cache. Evaluated on MAGI-1, SkyReels-V2, and HY-WorldPlay at INT2 quantization, our correction recovers most of the quality lost to aggressive quantization, reaching near-BF16 video quality, and can outperform INT4 quantization while using 50% less memory.

Large language models (LLMs) are integral to modern natural language processing and artificial intelligence. However, they face challenges in managing their significant memory requirements. Although quantization-aware training (QAT) offers a solution by reducing memory consumption through low-bit representations with minimal accuracy loss, it demands substantial training resources to optimize model weights and quantization parameters. To address this, we propose Efficient Quantization-Aware Training (EfficientQAT), a novel quantization technique for compressing LLMs. EfficientQAT involves two consecutive phases: Block-wise training of all parameters (Block-AP) and end-to-end training of quantization parameters (E2E-QP). Block-AP sequentially conducts quantization-aware training for all parameters in each transformer block with block-wise reconstruction, maintaining efficiency by avoiding training the entire LLM. Initialized with quantized model, E2E-QP then trains only quantization parameters (step sizes) end-to-end, enhancing efficiency with a fixed quantized backbone and reduced trainable parameter count. Extensive experiments demonstrate that EfficientQAT outperforms previous quantization methods across a range of models, including base LLMs, instruction-tuned LLMs, and multimodal LLMs, with scales from 7B to 70B parameters at various quantization bits. For instance, EfficientQAT obtains a 2-bit Llama-2-70B model on a single A100-80GB GPU in 41 hours, with less than 3\% accuracy degradation compared to the full precision (69.48 vs. 72.41). Notably, this INT2 quantized 70B model obtains a 1.67 accuracy gain over the Llama-2-13B model (69.48 vs. 67.81) while requiring less memory (19.2GB vs. 24.2GB). Code is available at https://github.com/OpenGVLab/EfficientQAT.

Post-training quantization is widely used for compressing large neural networks, but aggressive low-bit quantization can significantly degrade model quality. A common remedy is to augment the quantized weights with a low-rank correction, leading to approximations of the form Wapprox Q+LR. In this paper, we study this low-precision plus low-rank representation through the layer-wise reconstruction objective |XW-X(Q+LR)|_F^2, where X is a calibration matrix. We establish, to our knowledge, the first information-theoretic lower bounds for this problem under finite-alphabet and bounded low-rank compensation constraints. We then propose GPTQ-intrinsic LoRA, a training-free algorithm that incorporates the low-rank correction directly into a GPTQ-style quantization pass by appropriately augmenting the calibration Hessian. For the choice L=V_r, where V_r contains the top right singular vectors of X, we prove layer-wise reconstruction error bounds in which the usual GPTQ dependence on |X|_F^2 is replaced by the rank-r residual |X-X_r|_F^2, up to regularization terms. Under natural structural assumptions, these bounds match the information-theoretic lower bounds in their dominant scaling, up to constants and mild factors. We also introduce Bid-Up, a fixed-grid quantization refinement step that can be alternated with optimal low-rank compensation with guaranteed non-increasing layer-wise reconstruction error. Experiments on Qwen3 language models and DeiT vision transformers show that GPTQ-intrinsic LoRA improves over GPTQ and GPTQ followed by low-rank compensation, with additional gains from refinement loops.

Deep networks run with low precision operations at inference time offer power and space advantages over high precision alternatives, but need to overcome the challenge of maintaining high accuracy as precision decreases. Here, we present a method for training such networks, Learned Step Size Quantization, that achieves the highest accuracy to date on the ImageNet dataset when using models, from a variety of architectures, with weights and activations quantized to 2-, 3- or 4-bits of precision, and that can train 3-bit models that reach full precision baseline accuracy. Our approach builds upon existing methods for learning weights in quantized networks by improving how the quantizer itself is configured. Specifically, we introduce a novel means to estimate and scale the task loss gradient at each weight and activation layer's quantizer step size, such that it can be learned in conjunction with other network parameters. This approach works using different levels of precision as needed for a given system and requires only a simple modification of existing training code.

Mixture-of-experts (MoE) models often exceed a single accelerator's memory capacity. Offloading experts to host memory creates a severe PCIe I/O bottleneck because data-dependent routing keeps transfers on the critical path. We present Specter, an inference system that uses quantization to combine speculative decoding with expert offloading. Its lightweight quantized draft model runs efficiently on device while preserving high-fidelity expert activation patterns. This provides accurate multi-step lookahead over future expert usage, allowing the runtime to organize expert movement and execution ahead of verification and improve both communication and execution efficiency. Under single-request inference, Specter achieves an average 1.50x (up to 1.88x) speedup in time per output token (TPOT) over the state-of-the-art system. Specter makes memory-constrained, single-GPU MoE inference more practical on commodity hardware. Our code is available at https://github.com/wwwwwf/specter_asplos.

Text-to-image diffusion models are computationally intensive, often requiring dozens of forward passes through large transformer backbones. For instance, Stable Diffusion XL generates high-quality images with 50 evaluations of a 2.6B-parameter model, an expensive process even for a single batch. Few-step diffusion models reduce this cost to 2-8 denoising steps but still depend on large, uncompressed U-Net or diffusion transformer backbones, which are often too costly for full-precision inference without datacenter GPUs. These requirements also limit existing post-training quantization methods that rely on full-precision calibration. We introduce Q-Sched, a new paradigm for post-training quantization that modifies the diffusion model scheduler rather than model weights. By adjusting the few-step sampling trajectory, Q-Sched achieves full-precision accuracy with a 4x reduction in model size. To learn quantization-aware pre-conditioning coefficients, we propose the JAQ loss, which combines text-image compatibility with an image quality metric for fine-grained optimization. JAQ is reference-free and requires only a handful of calibration prompts, avoiding full-precision inference during calibration. Q-Sched delivers substantial gains: a 15.5% FID improvement over the FP16 4-step Latent Consistency Model and a 16.6% improvement over the FP16 8-step Phased Consistency Model, showing that quantization and few-step distillation are complementary for high-fidelity generation. A large-scale user study with more than 80,000 annotations further confirms Q-Sched's effectiveness on both FLUX.1[schnell] and SDXL-Turbo.

Quantization Aware Training (QAT) is a neural network quantization technique that compresses model size and improves operational efficiency while effectively maintaining model performance. The paradigm of QAT is to introduce fake quantization operators during the training process, allowing the model to autonomously compensate for information loss caused by quantization. Making quantization parameters trainable can significantly improve the performance of QAT, but at the cost of compromising the flexibility during inference, especially when dealing with activation values with substantially different distributions. In this paper, we propose an effective learnable adaptive neural network quantization method, called Adaptive Step Size Quantization (ASQ), to resolve this conflict. Specifically, the proposed ASQ method first dynamically adjusts quantization scaling factors through a trained module capable of accommodating different activations. Then, to address the rigid resolution issue inherent in Power of Two (POT) quantization, we propose an efficient non-uniform quantization scheme. We utilize the Power Of Square root of Two (POST) as the basis for exponential quantization, effectively handling the bell-shaped distribution of neural network weights across various bit-widths while maintaining computational efficiency through a Look-Up Table method (LUT). Extensive experimental results demonstrate that the proposed ASQ method is superior to the state-of-the-art QAT approaches. Notably that the ASQ is even competitive compared to full precision baselines, with its 4-bit quantized ResNet34 model improving accuracy by 1.2\% on ImageNet.

Diffusion models have demonstrated remarkable capabilities in image synthesis and related generative tasks. Nevertheless, their practicality for low-latency real-world applications is constrained by substantial computational costs and latency issues. Quantization is a dominant way to compress and accelerate diffusion models, where post-training quantization (PTQ) and quantization-aware training (QAT) are two main approaches, each bearing its own properties. While PTQ exhibits efficiency in terms of both time and data usage, it may lead to diminished performance in low bit-width. On the other hand, QAT can alleviate performance degradation but comes with substantial demands on computational and data resources. To capitalize on the advantages while avoiding their respective drawbacks, we introduce a data-free and parameter-efficient fine-tuning framework for low-bit diffusion models, dubbed EfficientDM, to achieve QAT-level performance with PTQ-like efficiency. Specifically, we propose a quantization-aware variant of the low-rank adapter (QALoRA) that can be merged with model weights and jointly quantized to low bit-width. The fine-tuning process distills the denoising capabilities of the full-precision model into its quantized counterpart, eliminating the requirement for training data. We also introduce scale-aware optimization and employ temporal learned step-size quantization to further enhance performance. Extensive experimental results demonstrate that our method significantly outperforms previous PTQ-based diffusion models while maintaining similar time and data efficiency. Specifically, there is only a marginal 0.05 sFID increase when quantizing both weights and activations of LDM-4 to 4-bit on ImageNet 256x256. Compared to QAT-based methods, our EfficientDM also boasts a 16.2x faster quantization speed with comparable generation quality.

The Muon optimizer has emerged as a compelling alternative to Adam for training large language models, achieving remarkable computational savings through gradient orthogonalization. However, Muon's optimizer state is more sensitive to quantization errors: because the orthogonalization discards the magnitudes of singular values and retains only directional information, even small quantization errors in singular vector directions are amplified in the update. In this work, we propose MuonQ, a low-bit Muon training framework built on the principle of directional fidelity optimization. First, we apply a pre-quantization normalization so that each step introduces quantization errors of the same magnitude, preventing the accumulated error from developing a preferred direction. Second, we introduce a structural decomposition that separately quantizes the dominant singular components via power iteration, ensuring that quantization errors perturb only singular value magnitudes rather than rotating singular vector directions. Third, we adopt μ-law companding quantization to allocate higher resolution to densely packed momentum values, shifting the quantization objective from outlier preservation to dense-region distinguishability. Together, these techniques enable stable 4-bit quantization of Muon's optimizer states. Pre-training experiments on GPT-style and LLaMA-style models demonstrate that MuonQ at 4-bit precision closely matches full-precision Muon in both training loss and downstream task accuracy, while reducing optimizer state memory by up to 7.3 times. Our code is available at https://github.com/YupengSu/MuonQ.

We present OuroMamba, the first data-free post-training quantization (DFQ) method for vision Mamba-based models (VMMs). We identify two key challenges in enabling DFQ for VMMs, (1) VMM's recurrent state transitions restricts capturing of long-range interactions and leads to semantically weak synthetic data, (2) VMM activations exhibit dynamic outlier variations across time-steps, rendering existing static PTQ techniques ineffective. To address these challenges, OuroMamba presents a two-stage framework: (1) OuroMamba-Gen to generate semantically rich and meaningful synthetic data. It applies contrastive learning on patch level VMM features generated through neighborhood interactions in the latent state space, (2) OuroMamba-Quant to employ mixed-precision quantization with lightweight dynamic outlier detection during inference. In specific, we present a thresholding based outlier channel selection strategy for activations that gets updated every time-step. Extensive experiments across vision and generative tasks show that our data-free OuroMamba surpasses existing data-driven PTQ techniques, achieving state-of-the-art performance across diverse quantization settings. Additionally, we implement efficient GPU kernels to achieve practical latency speedup of up to 2.36x. Code and synthetic dataset are available here: https://github.com/georgia-tech-synergy-lab/ICCV-OuroMamba

A lot of recent progress has been made in ultra low-bit quantization, promising significant improvements in latency, memory footprint and energy consumption on edge devices. Quantization methods such as Learned Step Size Quantization can achieve model accuracy that is comparable to full-precision floating-point baselines even with sub-byte quantization. However, it is extremely challenging to deploy these ultra low-bit quantized models on mainstream CPU devices because commodity SIMD (Single Instruction, Multiple Data) hardware typically supports no less than 8-bit precision. To overcome this limitation, we propose DeepGEMM, a lookup table based approach for the execution of ultra low-precision convolutional neural networks on SIMD hardware. The proposed method precomputes all possible products of weights and activations, stores them in a lookup table, and efficiently accesses them at inference time to avoid costly multiply-accumulate operations. Our 2-bit implementation outperforms corresponding 8-bit integer kernels in the QNNPACK framework by up to 1.74x on x86 platforms.

Diffusion models have achieved significant visual generation quality. However, their significant computational and memory costs pose challenge for their application on resource-constrained mobile devices or even desktop GPUs. Recent few-step diffusion models reduces the inference time by reducing the denoising steps. However, their memory consumptions are still excessive. The Post Training Quantization (PTQ) replaces high bit-width FP representation with low-bit integer values (INT4/8) , which is an effective and efficient technique to reduce the memory cost. However, when applying to few-step diffusion models, existing quantization methods face challenges in preserving both the image quality and text alignment. To address this issue, we propose an mixed-precision quantization framework - MixDQ. Firstly, We design specialized BOS-aware quantization method for highly sensitive text embedding quantization. Then, we conduct metric-decoupled sensitivity analysis to measure the sensitivity of each layer. Finally, we develop an integer-programming-based method to conduct bit-width allocation. While existing quantization methods fall short at W8A8, MixDQ could achieve W8A8 without performance loss, and W4A8 with negligible visual degradation. Compared with FP16, we achieve 3-4x reduction in model size and memory cost, and 1.45x latency speedup.

Linear attention replaces growing KV caches with fixed-size recurrent states, yet these persistent states can become a substantial memory bottleneck under concurrent serving. Directly quantizing recurrent states to low precision often leads to severe accuracy degradation, as quantization errors propagate through successive state updates. We discover that the impact of these errors depends on two complementary dimensions: temporally, errors in long-lived memory can persist across many decoding steps; spatially, errors in different key rows affect model outputs differently, while state magnitudes vary substantially along both rows and columns. Motivated by these observations, we propose STEPQuant, a spatial-temporal post-training quantization framework for Delta-rule recurrent states. STEPQuant allocates precision according to error magnitude and memory lifetime, and jointly fits key-row and value-column scales based on state distributions and key-row impact on output error. Experiments on Qwen3.8-27B and Kimi-Linear-48B-A3B-Instruct across both long- and short-generation benchmarks show that STEPQuant closely matches FP32-state accuracy under a nominal 6-bit budget and outperforms uniform INT8 in its 4-bit configuration. Integrated into SGLang with optimized GPU kernels, 6-bit STEPQuant achieves over 5x recurrent-state compression and reduces total serving memory by up to 68.7%. Our code is available at https://github.com/Dreamer-Toby/STEPQuant.

Vision-Language-Action (VLA) models unify perception, reasoning, and control within a single policy, yet their multi-billion-parameter backbones and diffusion-based action heads make on-device deployment prohibitively expensive. Prior quantization efforts offer only partial solutions, compressing the LLM backbone while leaving the DiT action head at full precision, or resorting to mixed-precision schemes, driven by the belief that uniformly quantizing the action head is inherently unstable. We challenge this assumption with Omega-QVLA, the first training-free post-training quantization framework that compresses both the language backbone and the entire diffusion action head of a VLA model to a uniform W4A4 precision, eliminating the need for mixed-precision allocation. Omega-QVLA combines a composite SVD-Hadamard rotation that equalizes per-channel weight energy while diffusing residual activation outliers with per-step DiT activation scaling quantization that absorbs dynamic-range drift across denoising steps. On LIBERO, Omega-QVLA compresses Pi 0.5 and GR00T N1.5 to W4A4 with 98.0% and 87.8% task success rates, matching or exceeding their FP16 references of 97.1% and 87.0%, while reducing the static memory footprint by 71.3%. Real-world manipulation experiments further confirm smooth, accurate manipulation where prior methods fail. Code is available at https://github.com/UCMP13753/Omega-QVLA.

As large language model inference shifts toward lower precision, post-training quantization (PTQ) becomes increasingly brittle, making quantization-aware training (QAT) essential for preserving model quality. However, QAT has a structural mismatch: gradient updates are applied to latent full-precision weights, while the loss and gradients are computed on lossy reconstructions of those weights. This mismatch can lead to suboptimal training trajectories and a higher loss floor. Second-order PTQ methods address a similar problem by minimizing loss-aware reconstruction error, but applying such expensive reconstruction repeatedly during QAT as the weights evolve is impractical. We introduce QUASAR, a QAT method that brings lightweight, loss-aware reconstruction into the training loop. At each training step, QUASAR reconstructs the latent weights by searching over a small set of clipping ranges and fitting dequantization parameters through saliency-weighted least squares. We use an exponential moving average of squared gradients as the per-parameter saliency signal. Our theoretical analysis shows that optimizing QUASAR's reconstruction objective tightens both the convergence and final-loss bounds of QAT. We evaluate QUASAR across four model families and across INT4, INT3, INT2, and NVFP4 quantization formats. QUASAR consistently achieves lower training and evaluation loss than competitive QAT methods and outperforms QAT and PTQ baselines on downstream benchmarks. At INT2, QUASAR improves average accuracy over the best QAT baseline by 13.3 points with quantization-aware distillation and by 10.9 points with QAT on mathematical reasoning data. Notably, after distillation on only about 600M tokens, QUASAR's INT4 Gemma-4 E4B checkpoint outperforms the corresponding QAT checkpoint released by Google, with 66% lower KL divergence and 1.8 points higher average accuracy.

Quantization techniques are pivotal in reducing the memory and computational demands of deep neural network inference. Existing solutions, such as ZeroQuant, offer dynamic quantization for models like BERT and GPT but overlook crucial memory-bounded operators and the complexities of per-token quantization. Addressing these gaps, we present a novel, fully hardware-enhanced robust optimized post-training W8A8 quantization framework, ZeroQuant-HERO. This framework uniquely integrates both memory bandwidth and compute-intensive operators, aiming for optimal hardware performance. Additionally, it offers flexibility by allowing specific INT8 modules to switch to FP16/BF16 mode, enhancing accuracy.

This study examines 4-bit quantization methods like GPTQ in large language models (LLMs), highlighting GPTQ's overfitting and limited enhancement in Zero-Shot tasks. While prior works merely focusing on zero-shot measurement, we extend task scope to more generative categories such as code generation and abstractive summarization, in which we found that INT4 quantization can significantly underperform. However, simply shifting to higher precision formats like FP6 has been particularly challenging, thus overlooked, due to poor performance caused by the lack of sophisticated integration and system acceleration strategies on current AI hardware. Our results show that FP6, even with a coarse-grain quantization scheme, performs robustly across various algorithms and tasks, demonstrating its superiority in accuracy and versatility. Notably, with the FP6 quantization, \codestar-15B model performs comparably to its FP16 counterpart in code generation, and for smaller models like the 406M it closely matches their baselines in summarization. Neither can be achieved by INT4. To better accommodate various AI hardware and achieve the best system performance, we propose a novel 4+2 design for FP6 to achieve similar latency to the state-of-the-art INT4 fine-grain quantization. With our design, FP6 can become a promising solution to the current 4-bit quantization methods used in LLMs.

Emergent properties have been widely adopted as a term to describe behavior not present in smaller models but observed in larger models. Recent work suggests that the trade-off incurred by quantization is also an emergent property, with sharp drops in performance in models over 6B parameters. In this work, we ask "are quantization cliffs in performance solely a factor of scale?" Against a backdrop of increased research focus on why certain emergent properties surface at scale, this work provides a useful counter-example. We posit that it is possible to optimize for a quantization friendly training recipe that suppresses large activation magnitude outliers. Here, we find that outlier dimensions are not an inherent product of scale, but rather sensitive to the optimization conditions present during pre-training. This both opens up directions for more efficient quantization, and poses the question of whether other emergent properties are inherent or can be altered and conditioned by optimization and architecture design choices. We successfully quantize models ranging in size from 410M to 52B with minimal degradation in performance.

Self-supervised representation learning follows a paradigm of withholding some part of the data and tasking the network to predict it from the remaining part. Among many techniques, data augmentation lies at the core for creating the information gap. Towards this end, masking has emerged as a generic and powerful tool where content is withheld along the sequential dimension, e.g., spatial in images, temporal in audio, and syntactic in language. In this paper, we explore the orthogonal channel dimension for generic data augmentation by exploiting precision redundancy. The data for each channel is quantized through a non-uniform quantizer, with the quantized value sampled randomly within randomly sampled quantization bins. From another perspective, quantization is analogous to channel-wise masking, as it removes the information within each bin, but preserves the information across bins. Our approach significantly surpasses existing generic data augmentation methods, while showing on par performance against modality-specific augmentations. We comprehensively evaluate our approach on vision, audio, 3D point clouds, as well as the DABS benchmark which is comprised of various data modalities. The code is available at https: //github.com/microsoft/random_quantize.

Post-training quantization (PTQ) has emerged as a promising technique for mitigating memory consumption and computational costs in large language models (LLMs). However, a systematic examination of various quantization schemes, model families, and quantization bit precision has been absent from the literature. In this paper, we conduct a comprehensive analysis of these factors by investigating the effects of PTQ on weight-only, activation-only, and weight-and-activation quantization using diverse methods such as round-to-nearest (RTN), GPTQ, ZeroQuant, and their variants. We apply these methods to two distinct model families with parameters ranging from 125M to 176B. Our contributions include: (1) a sensitivity analysis revealing that activation quantization is generally more susceptible to weight quantization, with smaller models often outperforming larger models in terms of activation quantization; (2) an evaluation and comparison of existing PTQ methods to optimize model size reduction while minimizing the impact on accuracy, revealing that none of the current methods can achieve the original model quality for quantization with either INT4-weight or INT4-weight-and-INT8-activation; (3) based on these insights, we propose an optimized method called Low-Rank Compensation (LoRC), which employs low-rank matrices to enhance model quality recovery with a minimal increase in model size.

Serving large language models cheaply increasingly means shipping models that are both structurally compressed to a fraction of their parameters and quantized to 4 bits. Together these steps degrade reasoning, mathematics, coding, and long-context behavior enough to require a recovery, or healing, stage before deployment. The default recipe, quantization-aware training (QAT), re-fits the compressed, quantized model to hard labels; in our pipeline it converged slowly and collapsed past its peak. We adopted Quantization-Aware Healing (QAH) instead. Because a structurally compressed model is never independently trained at full precision, its bfloat16 checkpoint is a distillation-recovered approximation of the original; QAH distills the 4-bit student directly from the original, uncompressed model. On a GPT-OSS 120B to 60B to MXFP4 pipeline, the QAH student matches or beats its bfloat16 source on 7 of 9 benchmarks at roughly 4 times less weight memory and half the teacher's parameter count, and is released open-weight as Hypernova-60B. Against a matched QAT baseline it reaches a comparable peak about 7 times faster and stays stable under continued training, without hand-tuned early stopping. We also report deployment lessons, including a large, reproducible quality gap between distributed-training backends. Our aim is a recipe deployable without a multi-week hyper-parameter search.

Quantization has become a crucial step for the efficient deployment of deep neural networks, where floating point operations are converted to simpler fixed point operations. In its most naive form, it simply consists in a combination of scaling and rounding transformations, leading to either a limited compression rate or a significant accuracy drop. Recently, Gradient-based post-training quantization (GPTQ) methods appears to be constitute a suitable trade-off between such simple methods and more powerful, yet expensive Quantization-Aware Training (QAT) approaches, particularly when attempting to quantize LLMs, where scalability of the quantization process is of paramount importance. GPTQ essentially consists in learning the rounding operation using a small calibration set. In this work, we challenge common choices in GPTQ methods. In particular, we show that the process is, to a certain extent, robust to a number of variables (weight selection, feature augmentation, choice of calibration set). More importantly, we derive a number of best practices for designing more efficient and scalable GPTQ methods, regarding the problem formulation (loss, degrees of freedom, use of non-uniform quantization schemes) or optimization process (choice of variable and optimizer). Lastly, we propose a novel importance-based mixed-precision technique. Those guidelines lead to significant performance improvements on all the tested state-of-the-art GPTQ methods and networks (e.g. +6.819 points on ViT for 4-bit quantization), paving the way for the design of scalable, yet effective quantization methods.

Almost every large language model that reaches a broad audience is quantized: trained in full precision, then compressed for efficiency. This step is assumed harmless and its safety is rarely re-checked. We find its principal side effect is increased bias that standard safety evaluation misses. Holding the model, its training, and the prompts fixed, a quantized model still refuses harmful requests, still avoids over-refusing benign prompts, and still selects the unbiased multiple-choice answer. Yet asked an open-ended question, the same model volunteers stereotypes in all eight languages we probe, in roughly one in four open-ended answers under an independent judge (~24% to ~27% across the compression ladder): it passes every standard check and still reaches users measurably more biased. The selective gap is a robust finding; whether open-ended bias further increases with compression is less certain, sensitive to the judge that scores it. We address both with QuantiBias, a benchmark that pairs a generative, multilingual stereotype probe with the refusal and multiple-choice controls that isolate open-ended generation, contrasts each build with and without reasoning, and rates the content severity of what it generates. Across two backbone models (Qwen and Gemma), a five-family screen, and eight benchmarks, quantizers allocate their extra precision by capability data that carries no bias-prevention signal, and reasoning before answering roughly halves the effect on some families while doing nothing on others. A quantized build must be re-evaluated for open-ended bias, not only on the short-form safeguards it already passes.

Low-bit quantization of network weights and activations can drastically reduce the memory footprint, complexity, energy consumption and latency of Deep Neural Networks (DNNs). However, low-bit quantization can also cause a considerable drop in accuracy, in particular when we apply it to complex learning tasks or lightweight DNN architectures. In this paper, we propose a training procedure that relaxes the low-bit quantization. We call this procedure DNN Quantization with Attention (DQA). The relaxation is achieved by using a learnable linear combination of high, medium and low-bit quantizations. Our learning procedure converges step by step to a low-bit quantization using an attention mechanism with temperature scheduling. In experiments, our approach outperforms other low-bit quantization techniques on various object recognition benchmarks such as CIFAR10, CIFAR100 and ImageNet ILSVRC 2012, achieves almost the same accuracy as a full precision DNN, and considerably reduces the accuracy drop when quantizing lightweight DNN architectures.

Non-parametric quantization has received much attention due to its efficiency on parameters and scalability to a large codebook. In this paper, we present a unified formulation of different non-parametric quantization methods through the lens of lattice coding. The geometry of lattice codes explains the necessity of auxiliary loss terms when training auto-encoders with certain existing lookup-free quantization variants such as BSQ. As a step forward, we explore a few possible candidates, including random lattices, generalized Fibonacci lattices, and densest sphere packing lattices. Among all, we find the Leech lattice-based quantization method, which is dubbed as Spherical Leech Quantization (Λ_{24}-SQ), leads to both a simplified training recipe and an improved reconstruction-compression tradeoff thanks to its high symmetry and even distribution on the hypersphere. In image tokenization and compression tasks, this quantization approach achieves better reconstruction quality across all metrics than BSQ, the best prior art, while consuming slightly fewer bits. The improvement also extends to state-of-the-art auto-regressive image generation frameworks.

This study introduces a modular framework for spatial image processing, integrating grayscale quantization, color and brightness enhancement, image sharpening, bidirectional transformation pipelines, and geometric feature extraction. A stepwise intensity transformation quantizes grayscale images into eight discrete levels, producing a posterization effect that simplifies representation while preserving structural detail. Color enhancement is achieved via histogram equalization in both RGB and YCrCb color spaces, with the latter improving contrast while maintaining chrominance fidelity. Brightness adjustment is implemented through HSV value-channel manipulation, and image sharpening is performed using a 3 * 3 convolution kernel to enhance high-frequency details. A bidirectional transformation pipeline that integrates unsharp masking, gamma correction, and noise amplification achieved accuracy levels of 76.10% and 74.80% for the forward and reverse processes, respectively. Geometric feature extraction employed Canny edge detection, Hough-based line estimation (e.g., 51.50{\deg} for billiard cue alignment), Harris corner detection, and morphological window localization. Cue isolation further yielded 81.87\% similarity against ground truth images. Experimental evaluation across diverse datasets demonstrates robust and deterministic performance, highlighting its potential for real-time image analysis and computer vision.

Advanced Large Language Models (LLMs) have revolutionized various fields, including communication networks, sparking an innovation wave that has led to new applications and services, and significantly enhanced solution schemes. Despite all these impressive developments, most LLMs typically require huge computational resources, resulting in terribly high energy consumption. Thus, this research study proposes an end-to-end pipeline that investigates the trade-off between energy efficiency and model performance for an LLM during fault ticket analysis in communication networks. It further evaluates the pipeline performance using two real-world datasets for the tasks of root cause analysis and response feedback in a communication network. Our results show that an appropriate combination of quantization and pruning techniques is able to reduce energy consumption while significantly improving model performance.

This work studies post-training parameter quantization in large language models (LLMs). We introduce quantization with incoherence processing (QuIP), a new method based on the insight that quantization benefits from incoherent weight and Hessian matrices, i.e., from the weights and the directions in which it is important to round them accurately being unaligned with the coordinate axes. QuIP consists of two steps: (1) an adaptive rounding procedure minimizing a quadratic proxy objective; (2) efficient pre- and post-processing that ensures weight and Hessian incoherence via multiplication by random orthogonal matrices. We complement QuIP with the first theoretical analysis for an LLM-scale quantization algorithm, and show that our theory also applies to an existing method, OPTQ. Empirically, we find that our incoherence preprocessing improves several existing quantization algorithms and yields the first LLM quantization methods that produce viable results using only two bits per weight. Our code can be found at https://github.com/jerry-chee/QuIP .

Deploying transformer-based neural networks on resource-constrained edge devices presents a significant challenge. This challenge is often addressed through various techniques, such as low-rank approximation and mixed-precision quantization. In this work, we introduce Mixed Low-Rank and Quantization (MLoRQ), a novel method that integrates both techniques. MLoRQ employs a two-stage optimization process to determine optimal bit-width and rank assignments for each layer, adhering to predefined memory constraints. This process includes: (i) an intra-layer optimization that identifies potentially optimal compression solutions out of all low-rank and quantization combinations; (ii) an inter-layer optimization that assigns bit-width precision and rank to each layer while ensuring the memory constraint is met. An optional final step applies a sequential optimization process using a modified adaptive rounding technique to mitigate compression-induced errors in joint low-rank approximation and quantization. The method is compatible and can be seamlessly integrated with most existing quantization algorithms. MLoRQ shows state-of-the-art results with up to 15\% performance improvement, evaluated on Vision Transformers for image classification, object detection, and instance segmentation tasks.

Large reasoning models (LRMs) improve complex problem-solving by generating long intermediate reasoning traces, but this substantially increases inference costs. NVFP4 inference offers a promising approach to reduce both computational and memory costs through hardware-supported low-precision execution. However, directly applying NVFP4 to LRMs introduces two practical limitations: reasoning accuracy degrades under quantization, and existing NVFP4 kernels do not fully realize latency benefits in small-batch autoregressive decoding. In this work, we analyze the effect of NVFP4 quantization on token-level uncertainty during reasoning. We show that quantization increases incorrect sampling at low-entropy symbolic tokens, while causing over-concentration on a small set of tokens in high-uncertainty reasoning steps. Based on this observation, we propose ReSET, a reasoning-step entropy-based temperature-scaling method that estimates step-level uncertainty online and adapts the decoding temperature using both token-level and step-level entropy signals. To address the latency gap, we further design a CUDA-core small-M NVFP4 kernel for latency-critical autoregressive decoding. Across reasoning benchmarks and model scales, ReSET improves NVFP4 reasoning accuracy by up to sim!2 points over the NVFP4 baseline. Our CUDA-core small-M kernel further improves latency-critical decoding, delivering up to 2.5!times kernel-level speedup over NVFP4 vLLM and approximately 2!times end-to-end decoding speedup over BF16. Code is available at https://github.com/aiha-lab/ReSET.

Low-bit post-training quantization (PTQ) is a practical route to deploy reasoning-capable LLMs under tight memory and latency budgets, yet it can markedly impair mathematical reasoning (drops up to 69.81% in our harder settings). We address two deployment-critical questions with process-level precision: Where along a step-structured solution does degradation first arise? How to mitigate it while staying in the low-bit regime? Across widely used PTQ methods (AWQ, GPTQ, SmoothQuant), open-source model families (Qwen, LLaMA; 0.5--7B), and math reasoning benchmarks (GSM8K, MATH, AIME), we perform format-aligned chain-of-thought with step-aligned attribution and uncover two robust regularities: (i) PTQ disproportionately elevates method and execution errors relative to high-level conceptual mistakes; and (ii) failures emerge early, with the first vulnerable step flipping and cascading to the final answer. These regularities suggest a general intervention principle: restore local token-level margins exactly at the earliest failure frontier. We instantiate this principle as a lightweight measurerightarrowlocaterightarrowrestore loop that operates directly on the quantized model: detect the first faulty step, construct our "Silver Bullet" datasets, and apply small-scale supervised/preference tuning. In our settings, as few as 332 curated examples and 3--5 minutes of compute on a single GPU recover 4-bit weight math reasoning toward the full-precision baseline while preserving PTQ efficiency. Our framework is quantizer- and architecture-agnostic within the evaluated regimes, and turns low-bit degradation from a global accuracy problem into a local, reproducible process intervention.

Existing post-training quantization methods for large language models (LLMs) offer remarkable success. However, the increasingly marginal performance gains suggest that existing quantization strategies are insufficient to support the development of more compressed models. To inspire new directions for future research, this paper introduces the concept of null space into LLMs quantization. We argue that the quantization error can be effectively alleviated by constraining the post-quantization weight perturbation to lie within the null space of input activations. To prove this idea, we propose a plug-and-play null space projection module for existing milestone PTQ baselines named Q2N. Specifically, we first design an efficient and accurate null space projection approximation method tailored to the characteristics of LLMs. Subsequently, we theoretically derive a closed-form solution for an equivalent vector of the obtained projection matrix, which satisfies practical inference condition while avoiding additional memory overhead. Extensive experiments are conducted on various state-of-the-art LLMs (LLaMA3, DeepSeek, Qwen3) and baselines, demonstrating the effectiveness of both our Q2N and the perspective of null space optimization for LLMs quantization. We view this paper the first step to further alleviate the quantization error based on the insights of null space, hoping it inspiring future researchers to design more advanced quantization methods. Codes are available at https://github.com/zjq0455/q2n.

Diffusion models have been widely adopted in image and video generation. However, their complex network architecture leads to high inference overhead for its generation process. Existing diffusion quantization methods primarily focus on the quantization of the model structure while ignoring the impact of time-steps variation during sampling. At the same time, most current approaches fail to account for significant activations that cannot be eliminated, resulting in substantial performance degradation after quantization. To address these issues, we propose Time-Rotation Diffusion Quantization (TR-DQ), a novel quantization method incorporating time-step and rotation-based optimization. TR-DQ first divides the sampling process based on time-steps and applies a rotation matrix to smooth activations and weights dynamically. For different time-steps, a dedicated hyperparameter is introduced for adaptive timing modeling, which enables dynamic quantization across different time steps. Additionally, we also explore the compression potential of Classifier-Free Guidance (CFG-wise) to establish a foundation for subsequent work. TR-DQ achieves state-of-the-art (SOTA) performance on image generation and video generation tasks and a 1.38-1.89x speedup and 1.97-2.58x memory reduction in inference compared to existing quantization methods.

Large language models have achieved significant advancements in complex mathematical reasoning benchmarks, such as MATH. However, their substantial computational requirements present challenges for practical deployment. Model quantization has emerged as an effective strategy to reduce memory usage and computational costs by employing lower precision and bit-width representations. In this study, we systematically evaluate the impact of quantization on mathematical reasoning tasks. We introduce a multidimensional evaluation framework that qualitatively assesses specific capability dimensions and conduct quantitative analyses on the step-by-step outputs of various quantization methods. Our results demonstrate that quantization differentially affects numerical computation and reasoning planning abilities, identifying key areas where quantized models experience performance degradation.

Large Language Model (LLM) inference is typically memory-intensive, especially when processing large batch sizes and long sequences, due to the large size of key-value (KV) cache. Vector Quantization (VQ) is recently adopted to alleviate this issue, but we find that the existing approach is susceptible to distribution shift due to its reliance on calibration datasets. To address this limitation, we introduce NSNQuant, a calibration-free Vector Quantization (VQ) technique designed for low-bit compression of the KV cache. By applying a three-step transformation-1) a token-wise normalization (Normalize), 2) a channel-wise centering (Shift), and 3) a second token-wise normalization (Normalize)-with Hadamard transform, NSNQuant effectively aligns the token distribution with the standard normal distribution. This alignment enables robust, calibration-free vector quantization using a single reusable codebook. Extensive experiments show that NSNQuant consistently outperforms prior methods in both 1-bit and 2-bit settings, offering strong generalization and up to 3times throughput gain over full-precision baselines.

Chest X-ray (CXR) segmentation is an important step in computer-aided diagnosis, yet deploying large foundation models in clinical settings remains challenging due to computational constraints. We propose AdaLoRA-QAT, a two-stage fine-tuning framework that combines adaptive low-rank encoder adaptation with full quantization-aware training. Adaptive rank allocation improves parameter efficiency, while selective mixed-precision INT8 quantization preserves structural fidelity crucial for clinical reliability. Evaluated across large-scale CXR datasets, AdaLoRA-QAT achieves 95.6% Dice, matching full-precision SAM decoder fine-tuning while reducing trainable parameters by 16.6\times and yielding 2.24\times model compression. A Wilcoxon signed-rank test confirms that quantization does not significantly degrade segmentation accuracy. These results demonstrate that AdaLoRA-QAT effectively balances accuracy, efficiency, and structural trust-worthiness, enabling compact and deployable foundation models for medical image segmentation. Code and pretrained models are available at: https://prantik-pdeb.github.io/adaloraqat.github.io/

Recent advancements in reasoning language models have demonstrated remarkable performance in complex tasks, but their extended chain-of-thought reasoning process increases inference overhead. While quantization has been widely adopted to reduce the inference cost of large language models, its impact on reasoning models remains understudied. In this study, we conduct the first systematic study on quantized reasoning models, evaluating the open-sourced DeepSeek-R1-Distilled Qwen and LLaMA families ranging from 1.5B to 70B parameters, and QwQ-32B. Our investigation covers weight, KV cache, and activation quantization using state-of-the-art algorithms at varying bit-widths, with extensive evaluation across mathematical (AIME, MATH-500), scientific (GPQA), and programming (LiveCodeBench) reasoning benchmarks. Our findings reveal that while lossless quantization can be achieved with W8A8 or W4A16 quantization, lower bit-widths introduce significant accuracy risks. We further identify model size, model origin, and task difficulty as critical determinants of performance. Contrary to expectations, quantized models do not exhibit increased output lengths. In addition, strategically scaling the model sizes or reasoning steps can effectively enhance the performance. All quantized models and codes will be open-sourced in https://github.com/ruikangliu/Quantized-Reasoning-Models.

Quantizing the weights of a neural network has two steps: (1) Finding a good low bit-complexity representation for weights (which we call the quantization grid) and (2) Rounding the original weights to values in the quantization grid. In this paper, we study the problem of rounding optimally given any quantization grid. The simplest and most commonly used way to round is Round-to-Nearest (RTN). By rounding in a data-dependent way instead, one can improve the quality of the quantized model significantly. We study the rounding problem from the lens of discrepancy theory, which studies how well we can round a continuous solution to a discrete solution without affecting solution quality too much. We prove that given m=poly(1/ε) samples from the data distribution, we can round all but O(m) model weights such that the expected approximation error of the quantized model on the true data distribution is le ε as long as the space of gradients of the original model is approximately low rank (which we empirically validate). Our proof, which is algorithmic, inspired a simple and practical rounding algorithm called DiscQuant. In our experiments, we demonstrate that DiscQuant significantly improves over the prior state-of-the-art rounding method called GPTQ and the baseline RTN over a range of benchmarks on Phi3mini-3.8B and Llama3.1-8B. For example, rounding Phi3mini-3.8B to a fixed quantization grid with 3.25 bits per parameter using DiscQuant gets 64\% accuracy on the GSM8k dataset, whereas GPTQ achieves 54\% and RTN achieves 31\% (the original model achieves 84\%). We make our code available at https://github.com/jerry-chee/DiscQuant.

We introduce StepAudio 3 Gen, a general-purpose audio generation model that supports zero-shot text-to-speech (TTS), voice design, vocal generation, sound effects, music, vibe speech, and mixtures of multiple audio types within a unified framework. At its core, StepAudio 3 Gen is a discrete autoregressive generator that models audio directly over residual vector quantization (RVQ) tokens, departing from the diffusion Transformer-based continuous generation paradigm prevalent in recent general audio models. Its StepAudio Tokenizer represents general audio at 12.5 Hz in a shared 16 times 2048 residual code space, jointly quantizing semantic and waveform-level acoustic features so that each code layer preserves both types of information. For generation, the backbone predicts the first codebook along the time axis using autoregressive modeling, while a lightweight causal Transformer completes the remaining fifteen codebooks along the codebook axis. Our study further identifies three key design principles: (1) interference-aware progressive pretraining for acquiring audio capabilities while preserving the textual abilities of the large language model, (2) RVQ Adaptor for effectively incorporating multi-codebook acoustic representations, and (3) discrete autoregressive modeling over a shared representation across general audio domains. With progressive pretraining, multi-task instruction training, and supervised fine-tuning, StepAudio 3 Gen achieves state-of-the-art performance on both TTS and voice design, while retaining strong generation capabilities across speech, vocals, sound effects, and music. Audio samples are available at https://stepaudiollm.github.io/step-audio-3-gen/.

The diffusion model has gained popularity in vision applications due to its remarkable generative performance and versatility. However, high storage and computation demands, resulting from the model size and iterative generation, hinder its use on mobile devices. Existing quantization techniques struggle to maintain performance even in 8-bit precision due to the diffusion model's unique property of temporal variation in activation. We introduce a novel quantization method that dynamically adjusts the quantization interval based on time step information, significantly improving output quality. Unlike conventional dynamic quantization techniques, our approach has no computational overhead during inference and is compatible with both post-training quantization (PTQ) and quantization-aware training (QAT). Our extensive experiments demonstrate substantial improvements in output quality with the quantized diffusion model across various datasets.

Post-training model compression is essential for enhancing the portability of Large Language Models (LLMs) while preserving their performance. While several compression approaches have been proposed, less emphasis has been placed on selecting the most suitable set of data (the so-called calibration data) for finding the compressed model configuration. The choice of calibration data is a critical step in preserving model capabilities both intra- and inter-tasks. In this work, we address the challenge of identifying high-performance calibration sets for both pruning and quantization by analyzing intrinsic data properties rather than model-specific signals. We introduce \textbf{ZipCal}, a model-agnostic data curation strategy that maximizes lexical diversity based on Zipfian power laws. Experiments demonstrate that our method consistently outperforms standard uniform random sampling across various pruning benchmarks. Notably, it also performs on par, in terms of downstream performance, with a state-of-the-art method that relies on model perplexity. The latter becomes prohibitively expensive at large-scale models and datasets, while \textbf{ZipCal} is on average sim240times faster due to its tractable linear complexityWe make the code and the experiments available at https://anonymous.4open.science/r/zipcal-71CD/..

We present PolarQuant, a post-training weight quantization method for large language models (LLMs) that exploits the distributional structure of neural network weights to achieve near-lossless compression. PolarQuant operates in three stages: (1) block-wise normalization to the unit hypersphere, (2) Walsh-Hadamard rotation to transform coordinates into approximately Gaussian random variables, and (3) quantization with centroids matched to the Gaussian distribution. Our ablation reveals that Hadamard rotation alone accounts for 98% of the quality improvement, reducing Qwen3.5-9B perplexity from 6.90 (absmax Q5) to 6.40 (Delta = +0.03 from FP16), making it practically lossless without any calibration data. Furthermore, PolarQuant functions as an effective preprocessing step for downstream INT4 quantizers: PolarQuant Q5 dequantized and re-quantized by torchao INT4 achieves perplexity 6.56 versus 6.68 for direct absmax INT4, while maintaining 43.1 tok/s throughput at 6.5 GB VRAM. Code and models are publicly available.

We introduce Qronos -- a new state-of-the-art post-training quantization algorithm that sequentially rounds and updates neural network weights. Qronos not only explicitly corrects errors due to both weight and activation quantization, but also errors resulting from quantizing previous layers. Our iterative algorithm is based on an interpretable and disciplined optimization framework that subsumes and surpasses existing data-driven approaches. At each step, Qronos alternates between error correction and diffusion via optimal update rules. Importantly, we prove that Qronos admits an efficient implementation that uses the Cholesky decomposition for solving least-squares problems. We also demonstrate that Qronos is compatible with existing transformation techniques such as Hadamard-based incoherence processing and weight-activation scaling equalization, among others. We evaluate Qronos using recent autoregressive language generation models in the Llama3 family; Qronos consistently outperforms previous state-of-the-art adaptive rounding methods when quantizing the weights, activations, and/or KV caches.

Denoising diffusion (score-based) generative models have recently achieved significant accomplishments in generating realistic and diverse data. These approaches define a forward diffusion process for transforming data into noise and a backward denoising process for sampling data from noise. Unfortunately, the generation process of current denoising diffusion models is notoriously slow due to the lengthy iterative noise estimations, which rely on cumbersome neural networks. It prevents the diffusion models from being widely deployed, especially on edge devices. Previous works accelerate the generation process of diffusion model (DM) via finding shorter yet effective sampling trajectories. However, they overlook the cost of noise estimation with a heavy network in every iteration. In this work, we accelerate generation from the perspective of compressing the noise estimation network. Due to the difficulty of retraining DMs, we exclude mainstream training-aware compression paradigms and introduce post-training quantization (PTQ) into DM acceleration. However, the output distributions of noise estimation networks change with time-step, making previous PTQ methods fail in DMs since they are designed for single-time step scenarios. To devise a DM-specific PTQ method, we explore PTQ on DM in three aspects: quantized operations, calibration dataset, and calibration metric. We summarize and use several observations derived from all-inclusive investigations to formulate our method, which especially targets the unique multi-time-step structure of DMs. Experimentally, our method can directly quantize full-precision DMs into 8-bit models while maintaining or even improving their performance in a training-free manner. Importantly, our method can serve as a plug-and-play module on other fast-sampling methods, e.g., DDIM. The code is available at https://github.com/42Shawn/PTQ4DM .

The Diffusion models, widely used for image generation, face significant challenges related to their broad applicability due to prolonged inference times and high memory demands. Efficient Post-Training Quantization (PTQ) is crucial to address these issues. However, unlike traditional models, diffusion models critically rely on the time-step for the multi-round denoising. Typically, each time-step is encoded into a hypersensitive temporal feature by several modules. Despite this, existing PTQ methods do not optimize these modules individually. Instead, they employ unsuitable reconstruction objectives and complex calibration methods, leading to significant disturbances in the temporal feature and denoising trajectory, as well as reduced compression efficiency. To address these challenges, we introduce a novel quantization framework that includes three strategies: 1) TIB-based Maintenance: Based on our innovative Temporal Information Block (TIB) definition, Temporal Information-aware Reconstruction (TIAR) and Finite Set Calibration (FSC) are developed to efficiently align original temporal features. 2) Cache-based Maintenance: Instead of indirect and complex optimization for the related modules, pre-computing and caching quantized counterparts of temporal features are developed to minimize errors. 3) Disturbance-aware Selection: Employ temporal feature errors to guide a fine-grained selection between the two maintenance strategies for further disturbance reduction. This framework preserves most of the temporal information and ensures high-quality end-to-end generation. Extensive testing on various datasets, diffusion models and hardware confirms our superior performance and acceleration..

Quantization has become one of the most effective methodologies to compress LLMs into smaller size. However, the existing quantization solutions still show limitations of either non-negligible accuracy drop or system inefficiency. In this paper, we make a comprehensive analysis of the general quantization principles on their effect to the triangle of accuracy, memory consumption and system efficiency. We propose MixLLM that explores the new optimization space of mixed-precision quantization between output features based on the insight that different output features matter differently in the model. MixLLM identifies the output features with high salience in the global view rather than within each single layer, effectively assigning the larger bit-width to output features that need it most to achieve good accuracy with low memory consumption. We present the sweet spot of quantization configuration of algorithm-system co-design that leads to high accuracy and system efficiency. To address the system challenge, we design the two-step dequantization to make use of the int8 Tensor Core easily and fast data type conversion to reduce dequantization overhead significantly, and present the software pipeline to overlap the memory access, dequantization and the MatMul to the best. Extensive experiments show that with only 10% more bits, the PPL increasement can be reduced from about 0.5 in SOTA to within 0.2 for Llama 3.1 70B, while on average MMLU-Pro improves by 0.93 over the SOTA of three popular models. In addition to its superior accuracy, MixLLM also achieves state-of-the-art system efficiency.

Efficient inference is critical for deploying deep learning models on edge AI devices. Low-bit quantization (e.g., 3- and 4-bit) with fixed-point arithmetic improves efficiency, while low-power memory technologies like analog nonvolatile memory enable further gains. However, these methods introduce non-ideal hardware behavior, including bit faults and device-to-device variability. We propose a regularization-based quantization-aware training (QAT) framework that supports fixed, learnable step-size, and learnable non-uniform quantization, achieving competitive results on CIFAR-10 and ImageNet. Our method also extends to Spiking Neural Networks (SNNs), demonstrating strong performance on 4-bit networks on CIFAR10-DVS and N-Caltech 101. Beyond quantization, our framework enables fault and variability-aware fine-tuning, mitigating stuck-at faults (fixed weight bits) and device resistance variability. Compared to prior fault-aware training, our approach significantly improves performance recovery under upto 20% bit-fault rate and 40% device-to-device variability. Our results establish a generalizable framework for quantization and robustness-aware training, enhancing efficiency and reliability in low-power, non-ideal hardware.

Camouflaged object detection (COD) segments objects that intentionally blend with the background, so predictions depend on subtle texture and boundary cues. COD is often needed under tight on-device memory and latency budgets, making low-bit inference highly desirable. However, COD is unusually hard to quantify aggressively. We study post-training W4A4 quantization of Transformer-based COD and find a task-specific cliff: heavy-tailed background tokens dominate a shared activation range, inflating the step size and pushing weak-but-structured boundary cues into the zero bin. This exposes a token-local bottleneck -- remove cross-token range domination and bound the zero-bin mass under 4-bit activations. To address this, we introduce COD-TDQ, a COD-aware Token-group Dual-constraint activation Quantization method. COD-TDQ addresses this token-local bottleneck with two coupled steps: Direct-Sum Token-Group (DSTG) assigns token-group scales to suppress cross-token range domination, and Dual-Constraint Range Projection (DCRP) projects each token-group clip range to keep the step-to-dispersion ratio and the zero-bin mass bounded. Across four COD benchmarks and two baseline models (CFRN and ESCNet), COD-TDQ consistently achieves an Sαscore more than 0.12 higher than that of the state-of-the-art quantization method without retraining. The code will be released.

Diffusion transformers (DiTs) achieve state-of-the-art image and video generation, but their multi-step sampling and growing parameter count make inference expensive. Post-training quantization (PTQ) is the natural remedy, yet DiT activations shift across timesteps, prompts, and guidance branches, forcing prior methods to re-fit calibration data for every new checkpoint or modality. We present OrbitQuant, a data-agnostic weight-activation quantizer that bypasses range estimation by quantizing in a normalized, rotated basis. In this basis, a randomized permuted block-Hadamard (RPBH) rotation concentrates each coordinate around one fixed, known marginal regardless of the input, so a single Lloyd-Max codebook serves all timesteps, prompts, and layers of a given input dimension. We extend the same quantizer to weight rows offline, absorbing the rotation into the weights so that it cancels inside each linear layer and only a forward rotation on the activations remains at runtime. The same recipe transfers from image to video with no per-modality tuning. Across FLUX.1, Z-Image-Turbo, Wan 2.1, and CogVideoX, it sets the state of the art for PTQ at several low-bit settings. It also pushes PTQ of image diffusion transformers to W2A4 with usable generation quality.

Quantization is a promising method that reduces memory usage and computational intensity of Deep Neural Networks (DNNs), but it often leads to significant output error that hinder model deployment. In this paper, we propose Bias Compensation (BC) to minimize the output error, thus realizing ultra-low-precision quantization without model fine-tuning. Instead of optimizing the non-convex quantization process as in most previous methods, the proposed BC bypasses the step to directly minimize the quantizing output error by identifying a bias vector for compensation. We have established that the minimization of output error through BC is a convex problem and provides an efficient strategy to procure optimal solutions associated with minimal output error,without the need for training or fine-tuning. We conduct extensive experiments on Vision Transformer models and Large Language Models, and the results show that our method notably reduces quantization output error, thereby permitting ultra-low-precision post-training quantization and enhancing the task performance of models. Especially, BC improves the accuracy of ViT-B with 4-bit PTQ4ViT by 36.89% on the ImageNet-1k task, and decreases the perplexity of OPT-350M with 3-bit GPTQ by 5.97 on WikiText2.The code is in https://github.com/GongCheng1919/bias-compensation.

Quantization is widely used to reduce the computational and memory demands of neural-network inference. In recurrent networks, however, the quantized state is stored and returned at the next time step, so the rule used to store that state can alter subsequent computations. Here, we introduce recurrent-state write-back to denote this rule and isolate its effect in a compact GRU encoder--decoder for fluorescence lifetime imaging, a molecular imaging modality used in quantitative biological imaging. A central task is estimating two lifetime parameters, the short-lived component τ1 and the long-lived component τ2, from high-noise time-resolved fluorescence signals. Holding the trained model fixed, replacing continuous state propagation with deterministic 4-bit state storage increases estimation errors for τ1 and τ2 by approximately 70x and 300x, respectively. Failure occurs when repeated small updates remain below the write threshold, leaving the stored state nearly fixed while the network continues to propose change. Error feedback, residual memory, and direction memory carry information from these suppressed updates across time and recover accuracy without retraining. Precision sweeps show that increasing state precision can worsen a fixed recurrent solution, while matched training shows that compatibility with the state interface can be learned. To test whether this behavior extends beyond the GRU, we repeat the post-training intervention in an independently trained LSTM, where coarse write-back reproduces the failure, error feedback restores accuracy, and state-specific interventions reveal greater sensitivity of the cell state than the hidden state. Our results establish recurrent-state write-back as a key determinant of low-precision recurrent dynamics and identify the state-storage interface as a central design consideration for quantized recurrent inference.

As large language models (LLMs) become more prevalent, there is a growing need for new and improved quantization methods that can meet the computationalast layer demands of these modern architectures while maintaining the accuracy. In this paper, we present TEQ, a trainable equivalent transformation that preserves the FP32 precision of the model output while taking advantage of low-precision quantization, especially 3 and 4 bits weight-only quantization. The training process is lightweight, requiring only 1K steps and fewer than 0.1 percent of the original model's trainable parameters. Furthermore, the transformation does not add any computational overhead during inference. Our results are on-par with the state-of-the-art (SOTA) methods on typical LLMs. Our approach can be combined with other methods to achieve even better performance. The code is available at https://github.com/intel/neural-compressor.

In this paper, we propose a feature affinity (FA) assisted knowledge distillation (KD) method to improve quantization-aware training of deep neural networks (DNN). The FA loss on intermediate feature maps of DNNs plays the role of teaching middle steps of a solution to a student instead of only giving final answers in the conventional KD where the loss acts on the network logits at the output level. Combining logit loss and FA loss, we found that the quantized student network receives stronger supervision than from the labeled ground-truth data. The resulting FAQD is capable of compressing model on label-free data, which brings immediate practical benefits as pre-trained teacher models are readily available and unlabeled data are abundant. In contrast, data labeling is often laborious and expensive. Finally, we propose a fast feature affinity (FFA) loss that accurately approximates FA loss with a lower order of computational complexity, which helps speed up training for high resolution image input.

In this paper, we present a simple optimization-based preprocessing technique called Weight Magnitude Reduction (MagR) to improve the performance of post-training quantization. For each linear layer, we adjust the pre-trained floating-point weights by solving an ell_infty-regularized optimization problem. This process greatly diminishes the maximum magnitude of the weights and smooths out outliers, while preserving the layer's output. The preprocessed weights are centered more towards zero, which facilitates the subsequent quantization process. To implement MagR, we address the ell_infty-regularization by employing an efficient proximal gradient descent algorithm. Unlike existing preprocessing methods that involve linear transformations and subsequent post-processing steps, which can introduce significant overhead at inference time, MagR functions as a non-linear transformation, eliminating the need for any additional post-processing. This ensures that MagR introduces no overhead whatsoever during inference. Our experiments demonstrate that MagR achieves state-of-the-art performance on the Llama family of models. For example, we achieve a Wikitext2 perplexity of 5.95 on the LLaMA2-70B model for per-channel INT2 weight quantization without incurring any inference overhead.

Long-context LLM decoding reads the key-value (KV) cache at every step. Loading it takes longer than computing attention over it, so throughput is bandwidth-bound. Hence, reducing the cache size can raise both decoding speed and serving capacity. The challenge is to reduce cache size while preserving the attention products, keeping reconstruction cheap, and using a fixed per-token bit count. At two bits per element, the most competitive methods rely on orthogonal transforms. However, existing techniques are either data-oblivious or use the query statistics without deriving the transform from a distortion criterion. Moreover, they rely on transforms built on top of random or Hadamard rotations, which equalize variances across entries rather than compacting energy, and fixed-width scalar quantizers, which are suboptimal at low rates. In this paper, we formulate KV cache quantization as a transform coding problem in which distortion is the error in the attention products. We derive closed-form optimal transforms for keys and values from calibration statistics, under a high-resolution model. We show that the optimal key transform is not orthogonal and satisfies a generalized Parseval relation: the attention-aware distortion becomes mean-squared error (MSE) in the transform domain. Thus, we can use MSE-optimal vector quantizers applied directly to the transformed key coefficients. To meet the fixed-width layout requirement, we show that grouping coefficients into equal-volume partitions makes equal-size codebooks attain the variable-rate optimum under the same high-resolution model. At two bits per element, our method, termed NOVA-KV, recovers most of the long-context retrieval accuracy lost by scalar quantization methods at comparable throughput.

Neural networks are both computationally intensive and memory intensive, making them difficult to deploy on embedded systems with limited hardware resources. To address this limitation, we introduce "deep compression", a three stage pipeline: pruning, trained quantization and Huffman coding, that work together to reduce the storage requirement of neural networks by 35x to 49x without affecting their accuracy. Our method first prunes the network by learning only the important connections. Next, we quantize the weights to enforce weight sharing, finally, we apply Huffman coding. After the first two steps we retrain the network to fine tune the remaining connections and the quantized centroids. Pruning, reduces the number of connections by 9x to 13x; Quantization then reduces the number of bits that represent each connection from 32 to 5. On the ImageNet dataset, our method reduced the storage required by AlexNet by 35x, from 240MB to 6.9MB, without loss of accuracy. Our method reduced the size of VGG-16 by 49x from 552MB to 11.3MB, again with no loss of accuracy. This allows fitting the model into on-chip SRAM cache rather than off-chip DRAM memory. Our compression method also facilitates the use of complex neural networks in mobile applications where application size and download bandwidth are constrained. Benchmarked on CPU, GPU and mobile GPU, compressed network has 3x to 4x layerwise speedup and 3x to 7x better energy efficiency.

Rollout generation is a major bottleneck in Reinforcement Learning (RL) for Mixture-of-Experts (MoE) Large Language Models, motivating low-precision rollout acceleration such as FP8. As an emerging low-precision format, NVFP4 combines fine-grained scaling for accuracy preservation with native W4A4 FP4 GEMMs for higher throughput than FP8. However, we find that directly applying NVFP4 to MoE RL rollout is impractical. NVFP4 rollout with BF16 training collapses after roughly 150 steps, accompanied by rapidly growing rollout-trainer log-probability gaps. Through training-inference error analysis and controlled ablations, we identify activation error, rather than weight error, as the dominant source of FP4 RL instability: weights can be synchronized and aligned by a shared quantization-dequantization path, whereas activations are recomputed online and error is amplified by the coarse E2M1 grid. Therefore, to stabilize NVFP4 RL for MoE, we propose QUantization-error Alignment across Dual Sides (QUADS). On the trainer side, we introduce Asymmetric Quantization-Aware Training fake-quantizing weights while keeping activations unquantized for better alignment. On the rollout side, Residual Activation Compensation corrects high-error activation channels while preserving native W4A4 GEMMs. In our MoE RL experiments on several benchmarks, QUADS achieves BF16-level accuracy, improves average pass@1 by 21.49 points over naive NVFP4 RL, and delivers ~16% higher rollout throughput than FP8.

Diffusion Language Models (DLMs) introduce unique quantization challenges due to their iterative denoising process. In this work, we reveal that quantization sensitivity is both taskand time-dependent, with different downstream tasks exhibiting distinct precision requirements across denoising steps. We further show that these patterns can be predicted without groundtruth labels or task-specific evaluation metrics. Building on these findings, we introduce T 2Quant, a task and time-aware mixedprecision quantization framework that uses a label-free sensitivity signal to optimally allocate activation precision across denoising steps under a fixed bit-width budget. Extensive experiments across three DLMs and six benchmarks demonstrate that T 2Quant consistently improves the average accuracy of existing quantization methods, achieving gains of up to 6.7 percentage points under the same budget.

The Diffusion model, a prevalent framework for image generation, encounters significant challenges in terms of broad applicability due to its extended inference times and substantial memory requirements. Efficient Post-training Quantization (PTQ) is pivotal for addressing these issues in traditional models. Different from traditional models, diffusion models heavily depend on the time-step t to achieve satisfactory multi-round denoising. Usually, t from the finite set {1, ldots, T} is encoded to a temporal feature by a few modules totally irrespective of the sampling data. However, existing PTQ methods do not optimize these modules separately. They adopt inappropriate reconstruction targets and complex calibration methods, resulting in a severe disturbance of the temporal feature and denoising trajectory, as well as a low compression efficiency. To solve these, we propose a Temporal Feature Maintenance Quantization (TFMQ) framework building upon a Temporal Information Block which is just related to the time-step t and unrelated to the sampling data. Powered by the pioneering block design, we devise temporal information aware reconstruction (TIAR) and finite set calibration (FSC) to align the full-precision temporal features in a limited time. Equipped with the framework, we can maintain the most temporal information and ensure the end-to-end generation quality. Extensive experiments on various datasets and diffusion models prove our state-of-the-art results. Remarkably, our quantization approach, for the first time, achieves model performance nearly on par with the full-precision model under 4-bit weight quantization. Additionally, our method incurs almost no extra computational cost and accelerates quantization time by 2.0 times on LSUN-Bedrooms 256 times 256 compared to previous works.

As Large Language Models (LLMs) become increasingly computationally complex, developing efficient deployment strategies, such as quantization, becomes crucial. State-of-the-art Post-training Quantization (PTQ) techniques often rely on calibration processes to maintain the accuracy of these models. However, while these calibration techniques can enhance performance in certain domains, they may not be as effective in others. This paper aims to draw attention to robust statistical approaches that can mitigate such issues. We propose a weight-adaptive PTQ method that can be considered a precursor to calibration-based PTQ methods, guiding the quantization process to preserve the distribution of weights by minimizing the Kullback-Leibler divergence between the quantized weights and the originally trained weights. This minimization ensures that the quantized model retains the Shannon information content of the original model to a great extent, guaranteeing robust and efficient deployment across many tasks. As such, our proposed approach can perform on par with most common calibration-based PTQ methods, establishing a new pre-calibration step for further adjusting the quantized weights with calibration. We show that our pre-calibration results achieve the same accuracy as some existing calibration-based PTQ methods on various LLMs.

Quantization leverages lower-precision weights to reduce the memory usage of large language models (LLMs) and is a key technique for enabling their deployment on commodity hardware. While LLM quantization's impact on utility has been extensively explored, this work for the first time studies its adverse effects from a security perspective. We reveal that widely used quantization methods can be exploited to produce a harmful quantized LLM, even though the full-precision counterpart appears benign, potentially tricking users into deploying the malicious quantized model. We demonstrate this threat using a three-staged attack framework: (i) first, we obtain a malicious LLM through fine-tuning on an adversarial task; (ii) next, we quantize the malicious model and calculate constraints that characterize all full-precision models that map to the same quantized model; (iii) finally, using projected gradient descent, we tune out the poisoned behavior from the full-precision model while ensuring that its weights satisfy the constraints computed in step (ii). This procedure results in an LLM that exhibits benign behavior in full precision but when quantized, it follows the adversarial behavior injected in step (i). We experimentally demonstrate the feasibility and severity of such an attack across three diverse scenarios: vulnerable code generation, content injection, and over-refusal attack. In practice, the adversary could host the resulting full-precision model on an LLM community hub such as Hugging Face, exposing millions of users to the threat of deploying its malicious quantized version on their devices.

Quantizing the weights of large language models (LLMs) from 16-bit to lower bitwidth is the de facto approach to deploy massive transformers onto more affordable accelerators. GPTQ emerged as one of the standard methods for one-shot post-training quantization at LLM scale. Yet, its inner workings are described as a sequence of ad-hoc algebraic updates that obscure any geometric meaning or worst-case guarantees. In this work, we show that, when executed back-to-front (from the last to first dimension) for a linear layer, GPTQ is mathematically identical to Babai's nearest plane algorithm for the classical closest vector problem (CVP) on a lattice defined by the Hessian matrix of the layer's inputs. This equivalence is based on a sophisticated mathematical argument, and has two analytical consequences: (i) the GPTQ error propagation step gains an intuitive geometric interpretation; (ii) GPTQ inherits the error upper bound of Babai's algorithm under the no-clipping condition. Taken together, these results place GPTQ on firm theoretical footing and open the door to importing decades of progress in lattice algorithms towards the design of future quantization algorithms for billion-parameter models.

As large language models have grown larger, interest has grown in low-precision numerical formats such as NVFP4 as a way to improve speed and reduce memory usage. However, quantizing models to NVFP4 remains difficult as the lack of precision generally degrades model performance. In this work, we address this issue with Four Over Six (4/6), a modification to the block-scaled NVFP4 quantization algorithm that yields reduced quantization error. Unlike integer formats, floating point formats have non-uniform step sizes which create larger quantization error on larger values. 4/6 takes advantage of this by adaptively scaling some blocks to smaller FP4 values, making the distribution of representable values more uniform and reducing quantization error for near-maximal values. We show that 4/6 can be implemented efficiently on NVIDIA Blackwell GPUs, resulting in performance gains during both pre-training and inference with minimal computational overhead. In pre-training experiments with the Nemotron 3 Nano 30B-A3B model architecture, we find that 4/6 brings training loss closer to BF16 compared to models trained with current state-of-the-art NVFP4 training recipes. Our code is available at http://github.com/mit-han-lab/fouroversix.

Post-training quantization (PTQ) is a practical path to deploy large diffusion models, but quantization noise can accumulate over the denoising trajectory and degrade generation quality. We propose Q-Drift, a principled sampler-side correction that treats quantization error as an implicit stochastic perturbation on each denoising step and derives a marginal-distribution-preserving drift adjustment. Q-Drift estimates a timestep-wise variance statistic from calibration, in practice requiring as few as 5 paired full-precision/quantized calibration runs. The resulting sampler correction is plug-and-play with common samplers, diffusion models, and PTQ methods, while incurring negligible overhead at inference. Across six diverse text-to-image models (spanning DiT and U-Net), three samplers (Euler, flow-matching, DPM-Solver++), and two PTQ methods (SVDQuant, MixDQ), Q-Drift improves FID over the corresponding quantized baseline in most settings, with up to 4.59 FID reduction on PixArt-Sigma (SVDQuant W3A4), while preserving CLIP scores.

Scalar quantization of large language models (LLMs) is fundamentally limited by information-theoretic bounds. While vector quantization (VQ) overcomes these limits by encoding blocks of parameters jointly, practical implementations must avoid the need for expensive lookup mechanisms or other explicit codebook storage. Lattice approaches address this through highly structured and dense packing. This paper explores the Leech lattice, which, with its optimal sphere packing and kissing configurations at 24 dimensions, is the highest dimensional lattice known with such optimal properties. To make the Leech lattice usable for LLM quantization, we extend an existing search algorithm based on the extended Golay code construction, to i) support indexing, enabling conversion to and from bitstrings without materializing the codebook, ii) allow angular search over union of Leech lattice shells, iii) propose fully-parallelisable dequantization kernel. Lastly, we provide a geometric reinterpretation of combining shape--gain quantization with GPTQ-style Hessian corrections: the standard scale-correction step of shape--gain acts as a retraction onto a product of spheres, yielding a Spherical GPTQ primarily acting on directions. We find that low-angular-distortion LLVQ reduces sensitivity to Hadamard/rotation preprocessing, and enables a strong Hadamard-free PTQ in practice. LLVQ delivers state-of-the-art LLM quantization performance, outperforming recent methods such as Quip\#, QTIP, and PVQ. The results highlight the effectiveness of high-dimensional lattices for scalable, theoretically grounded model compression.

Embedding index that enables fast approximate nearest neighbor(ANN) search, serves as an indispensable component for state-of-the-art deep retrieval systems. Traditional approaches, often separating the two steps of embedding learning and index building, incur additional indexing time and decayed retrieval accuracy. In this paper, we propose a novel method called Poeem, which stands for product quantization based embedding index jointly trained with deep retrieval model, to unify the two separate steps within an end-to-end training, by utilizing a few techniques including the gradient straight-through estimator, warm start strategy, optimal space decomposition and Givens rotation. Extensive experimental results show that the proposed method not only improves retrieval accuracy significantly but also reduces the indexing time to almost none. We have open sourced our approach for the sake of comparison and reproducibility.

Diffusion models have achieved great success in image generation tasks through iterative noise estimation. However, the heavy denoising process and complex neural networks hinder their low-latency applications in real-world scenarios. Quantization can effectively reduce model complexity, and post-training quantization (PTQ), which does not require fine-tuning, is highly promising in accelerating the denoising process. Unfortunately, we find that due to the highly dynamic distribution of activations in different denoising steps, existing PTQ methods for diffusion models suffer from distribution mismatch issues at both calibration sample level and reconstruction output level, which makes the performance far from satisfactory, especially in low-bit cases. In this paper, we propose Enhanced Distribution Alignment for Post-Training Quantization of Diffusion Models (EDA-DM) to address the above issues. Specifically, at the calibration sample level, we select calibration samples based on the density and diversity in the latent space, thus facilitating the alignment of their distribution with the overall samples; and at the reconstruction output level, we propose Fine-grained Block Reconstruction, which can align the outputs of the quantized model and the full-precision model at different network granularity. Extensive experiments demonstrate that EDA-DM outperforms the existing post-training quantization frameworks in both unconditional and conditional generation scenarios. At low-bit precision, the quantized models with our method even outperform the full-precision models on most datasets.

Quantization and cache mechanisms are typically applied individually for efficient Diffusion Transformers (DiTs), each demonstrating notable potential for acceleration. However, the promoting effect of combining the two mechanisms on efficient generation remains under-explored. Through empirical investigation, we find that the combination of quantization and cache mechanisms for DiT is not straightforward, and two key challenges lead to severe catastrophic performance degradation: (i) the sample efficacy of calibration datasets in post-training quantization (PTQ) is significantly eliminated by cache operation; (ii) the combination of the above mechanisms introduces more severe exposure bias within sampling distribution, resulting in amplified error accumulation in the image generation process. In this work, we take advantage of these two acceleration mechanisms and propose a hybrid acceleration method by tackling the above challenges, aiming to further improve the efficiency of DiTs while maintaining excellent generation capability. Concretely, a temporal-aware parallel clustering (TAP) is designed to dynamically improve the sample selection efficacy for the calibration within PTQ for different diffusion steps. A variance compensation (VC) strategy is derived to correct the sampling distribution. It mitigates exposure bias through an adaptive correction factor generation. Extensive experiments have shown that our method has accelerated DiTs by 12.7x while preserving competitive generation capability. The code will be available at https://github.com/xinding-sys/Quant-Cache.

Diffusion large language models dLLMs) have emerged as a promising alternative to autoregressive language models through bidirectional diffusion-based token generation. However, their growing model sizes and high inference costs make efficient deployment challenging: full-sequence denoising repeatedly invokes compute-intensive forward passes, while block-diffusion models additionally introduce a memory-intensive KV-cache. Low-bit weight-activation quantization is therefore attractive, yet existing dLLM post-training quantization methods rely on calibration data despite activation distributions shifting across masking states and denoising steps. We present SoloQ, a calibration-free quantization framework that maps weights and activations into a normalized rotated basis with a predictable marginal distribution, enabling data-independent quantization. SoloQ combines a structured K-RPBH rotation with a lightweight rescaling correction for calibration-free quantization. Its predictable post-rotation distribution supports both distribution-matched codebooks and hardware-native NVFP4. For block-diffusion models, SoloQ further applies commit-time KV-cache quantization to compress persistent states without perturbing the actively denoised block. Across full-sequence dLLMs (LLaDA and Dream) and block-diffusion dLLMs(Fast-dLLM v2 and Nemotron-Labs-Diffusion), SoloQ retains accuracy under 4-bit quantization and outperforms calibration-based baselines on knowledge- and reasoning-intensive benchmarks. With NVFP4, SoloQ reduces peak memory by up to 2.61X and accelerates end-to-end inference by up to 2.24X.

Asynchronous rollout improves the efficiency of reinforcement learning with verifiable rewards (RLVR) by reducing under-utilization during long-tail generation. Sustained concurrency also concentrates context processing into fewer decode steps, increasing the KV workload per step. We characterize this KV concentration and find that KV cache quantization delivers substantially greater acceleration than weight-only and weight-activation quantization in our matched-workload comparisons. However, INT4 KV rollout can degrade learning even with token-level truncated importance sampling (TIS). We propose KV4-RL, which combines calibration-free INT4 KV quantization with selective INT8 protection of attention sinks and recent context. Protecting a bounded number of positions reduces sampler mismatch while retaining most of the speedup from INT4. Across 400 iterations of Qwen3-8B-Base GRPO training, KV4-RL achieves 1.80times cumulative rollout speedup and 1.27times cumulative full-iteration speedup over BF16 rollout, reaching 1.97times rollout speedup over the final 50 iterations. Under a common BF16 evaluator, its final six-benchmark mean accuracy is within 0.5 percentage points of BF16-rollout training for both Qwen3-4B-Base and Qwen3-8B-Base.

In this paper, we introduce a novel algorithm, CO_3, for communication-efficiency distributed Deep Neural Network (DNN) training. CO_3 is a joint training/communication protocol, which encompasses three processing steps for the network gradients: (i) quantization through floating-point conversion, (ii) lossless compression, and (iii) error correction. These three components are crucial in the implementation of distributed DNN training over rate-constrained links. The interplay of these three steps in processing the DNN gradients is carefully balanced to yield a robust and high-performance scheme. The performance of the proposed scheme is investigated through numerical evaluations over CIFAR-10.

Serving Large Language Models (LLMs) is costly. However, post-training weight quantization can address this problem by both compressing their sizes for limited memory and saving bandwidth for acceleration. As not all weight dimensions are equally important, those methods typically rely on a sensitivity metric, which indicates the element-wise influence of weights on loss function and is used to preprocess original weights for better quantization. In this work, we conduct an empirical study on the accuracy of the sensitivity metric, and find that existing gradient and Hessian based metrics are very inaccurate: they underestimate quantization's impact on the loss function by orders of magnitude, mainly due to the small convergence radius of local 2nd order approximation, \ie, gradient and Hessian term in Taylor's formula. To tackle this problem, we propose Post-quantization Integral (PQI), an accurate metric to estimate posterior sensitivity in a fine-grained manner. To leverage this accurate metric, we further propose ReQuant, a simple yet powerful framework that mainly consists of two Dense-and-Sparse detach components: self-adaptive outlier selection and step-wise significant weights detach. Results show that ReQuant boosts state-of-the-art post-training quantization methods, with a pronounced improvement of 2.66 perplexity gain on Llama 3.2 1B with QTIP.

As large language models (LLMs) continue to scale, deployment is increasingly bottlenecked by the memory wall, motivating a shift toward extremely low-bit quantization. However, most quantization-aware training (QAT) methods apply hard rounding and the straight-through estimator (STE) from the beginning of the training, which prematurely discretizes the optimization landscape and induces persistent gradient mismatch between latent weights and quantized weights, hindering effective optimization of quantized models. To address this, we propose Hestia, a Hessian-guided differentiable QAT framework for extremely low-bit LLMs, which replaces the rigid step function with a temperature-controlled softmax relaxation to maintain gradient flow early in training while progressively hardening quantization. Furthermore, Hestia leverages a tensor-wise Hessian trace metric as a lightweight curvature signal to drive fine-grained temperature annealing, enabling sensitivity-aware discretization across the model. Evaluations on Llama-3.2 show that Hestia consistently outperforms existing ternary QAT baselines, yielding average zero-shot improvements of 5.39% and 4.34% for the 1B and 3B models. These results indicate that Hessian-guided relaxation effectively recovers representational capacity, establishing a more robust training path for 1.58-bit LLMs. The code is available at https://github.com/hestia2026/Hestia.

The rapid scaling of Protein Language Models (PLMs) has unlocked unprecedented accuracy in protein structure prediction and design, but the quadratic memory growth of the Key-Value (KV) cache during inference remains a prohibitive barrier for single-GPU deployment and high-throughput generation. While 8-bit quantization is now standard, 3-bit quantization remains elusive due to severe numerical outliers in activations. This paper presents TurboESM, an adaptation of Google's TurboQuant to the PLM domain. We solve the fundamental incompatibility between Rotary Position Embeddings (RoPE) and orthogonal transformations by deriving a RoPE-first rotation pipeline. We introduce a head-wise SVD calibration method tailored to the amino acid activation manifold, a dual look-up table (LUT) strategy for asymmetric K/V distributions, and a 1-bit Quantized Johnson-Lindenstrauss (QJL) residual correction. All experiments are conducted on ESM-2 650M, where our implementation achieves a 7.1x memory reduction (330 MB to 47 MB) while maintaining cosine similarity > 0.96 in autoregressive decoding across diverse protein families, including short peptides, transmembrane helices, enzyme active site fragments, and intrinsically disordered regions. We further implement a Triton-based fused decode attention kernel that eliminates intermediate dequantization memory allocations, achieving a 1.96x speedup over the PyTorch two-step path for the KV fetch operation alone; however, TurboESM incurs a prefill overhead of 21-27 ms relative to the original model due to KV quantization and packing, making it most suitable for memory-bound scenarios rather than latency-critical short-sequence workloads. Analysis reveals that PLMs exhibit sharper outlier profiles than large language models (LLMs) due to amino acid vocabulary sparsity, and our method effectively addresses these distributions.

Optimizer-state quantization is commonly designed for Adam's dense, parameter-aligned first- and second-moment arrays. This abstraction breaks for memory-efficient optimizers, whose states may be factored, confidence-modulated, or maintained in a projected space, so similar reconstruction error can produce different update error. We formulate optimizer-state quantization as a joint problem over representation, topology, and update semantics. We then introduce Adaptive Log-Space (AL) quantization for non-negative states. AL fits each block's observed nonzero logarithmic interval and reserves a separate code for exact zero, enforcing q = 0 Leftrightarrow x = 0; signed momentum and state precision remain independently selectable. Controlled probes show that adaptive ranges reduce update error and temporal drift, exact-zero reservation preserves dormant states, and state topology constrains useful block granularity. End-to-end language-model training evaluates the resulting policy across dense, factored, confidence, and projected optimizer states. On TinyLlama-1.1B, AL8 with uniform 8-bit momentum reaches 72.90 perplexity versus 73.54 for bitsandbytes 8-bit AdamW, with comparable optimizer-state storage and higher throughput. CAME matches reference-level final perplexity across three seeds when its non-negative states use AL16, while a semantic grouping-and-protection policy closes most of quantized Adafactor's 100K-step late-loss gap. These results make state topology and update semantics first-class design constraints for optimizer quantization.

Post-training quantization (PTQ) is a practical approach to reducing the memory and computational footprint of large language models (LLMs) without retraining. GPTQ-based methods have become the de facto standard, yet they suffer from two complementary limitations. Methods with local, layer-wise objectives lack global supervision; while methods with global objectives fix their Hessian estimates at the start and ignore first-order gradients, so their guidance grows stale as quantization proceeds. This paper presents G^2PTQ, a unified PTQ framework with Generalized Gradient Compensation that integrates both first- and second-order information under a globally supervised, block-wise optimization objective. By refreshing gradient and Hessian estimates before quantizing each Transformer block, G^2PTQ avoids the staleness of prior global methods. Furthermore, to stabilize the exact first-order compensation, we introduce a trust-region scaling mechanism that dynamically bounds the gradient step to prevent exploding weight updates. Finally, we derive efficient implementations for block-wise Hessian approximation and exact gradient compensation. Experimental results on various model families and bit-widths demonstrate that G^2PTQ enables better alignment with the full-precision model, outperforming state-of-the-art baselines. Code is available at: https://github.com/G2PTQ/G2PTQ.

Deploying deep learning models on edge CPUs is bottlenecked by computational and memory constraints. Mixed-precision quantization promises to reduce inference latency while preserving accuracy. However, quantization affects different layer types in inconsistent ways, so identifying where accuracy loss is minimized and latency reduction is maximized is critical, as the effect accumulates over a full deployment into substantial savings or unacceptable task degradation. Such identification relies on sensitivity metrics, proxies that estimate layer-wise degradation without evaluating the task accuracy of every candidate policy. Nevertheless, widely used metrics fail systematically on modern architectures. We present a systematic empirical study of 13 sensitivity metrics for layer-wise INT8 quantization across four distinctly different neural networks, and validate the resulting policies on two ARM64 platforms. Gradient-based sensitivity methods fail on 4 out of 8 model-hardware configurations and weight-based statistics on 2. In contrast, the Jensen-Shannon Divergence achieves zero catastrophic failures, reliably isolating the layers that cannot be safely quantized. A sensitivity metric alone does not define a policy, and the fixed thresholds typically used for that step are fragile over the highly skewed distributions of modern architectures. We address this with K-Means clustering, achieving near-lossless accuracy and a mean speed-up of 1.81times over the full-precision model. Finally, we reveal that excluding from quantization the layers whose speed-up is negligible, regardless of their sensitivity, can be counterproductive, as it induces computational graph fragmentation and disables operator fusion. Our results yield concrete allocation policies for practitioners and researchers deploying quantized vision models on heterogeneous edge CPUs, without GPU access or gradient computation.

Data clipping is crucial in reducing noise in quantization operations and improving the achievable accuracy of quantization-aware training (QAT). Current practices rely on heuristics to set clipping threshold scalars and cannot be shown to be optimal. We propose Optimally Clipped Tensors And Vectors (OCTAV), a recursive algorithm to determine MSE-optimal clipping scalars. Derived from the fast Newton-Raphson method, OCTAV finds optimal clipping scalars on the fly, for every tensor, at every iteration of the QAT routine. Thus, the QAT algorithm is formulated with provably minimum quantization noise at each step. In addition, we reveal limitations in common gradient estimation techniques in QAT and propose magnitude-aware differentiation as a remedy to further improve accuracy. Experimentally, OCTAV-enabled QAT achieves state-of-the-art accuracy on multiple tasks. These include training-from-scratch and retraining ResNets and MobileNets on ImageNet, and Squad fine-tuning using BERT models, where OCTAV-enabled QAT consistently preserves accuracy at low precision (4-to-6-bits). Our results require no modifications to the baseline training recipe, except for the insertion of quantization operations where appropriate.

Methods based on weight compensation, which iteratively apply quantization and weight compensation to minimize the output error, have recently demonstrated remarkable success in quantizing Large Language Models (LLMs). The representative work, GPTQ, introduces several key techniques that make such iterative methods practical for LLMs with billions of parameters. GPTAQ extends this approach by introducing an asymmetric calibration process that aligns the output of each quantized layer with its full-precision counterpart, incorporating a residual error into the weight compensation framework. In this work, we revisit the formulation of the residual error. We identify a sub-optimal calibration objective in existing methods: during the intra-layer calibration process, they align the quantized output with the output from compensated weights, rather than the true output from the original full-precision model. Therefore, we redefine the objective to precisely align the quantized model's output with the original output of the full-precision model at each step. We then reveal that the residual error originates not only from the output difference of the preceding layer but also from the discrepancy between the compensated and original weights within each layer, which we name the 'compensation-aware error'. By inheriting the neuron decomposition technique from GPTAQ, we can efficiently incorporate this compensation-aware error into the weight update process. Extensive experiments on various LLMs and quantization settings demonstrate that our proposed enhancements integrate seamlessly with both GPTQ and GPTAQ, significantly improving their quantization performance. Our code is publicly available at https://github.com/list0830/ResComp.

Large Language Models (LLMs) have proven their exceptional capabilities in performing language-related tasks. However, their deployment poses significant challenges due to their considerable memory and storage requirements. In response to this issue, weight-only quantization, particularly 3 and 4-bit weight-only quantization, has emerged as one of the most viable solutions. As the number of bits decreases, the quantization grid broadens, thus emphasizing the importance of up and down rounding. While previous studies have demonstrated that fine-tuning up and down rounding with the addition of perturbations can enhance accuracy in some scenarios, our study is driven by the precise and limited boundary of these perturbations, where only the threshold for altering the rounding value is of significance. Consequently, we propose a concise and highly effective approach for optimizing the weight rounding task. Our method, named SignRound, involves lightweight block-wise tuning using signed gradient descent, enabling us to achieve outstanding results within 400 steps. SignRound outperforms the established baseline of rounding-to-nearest (RTN) and competes impressively against recent methods, without introducing additional inference overhead. The source code will be publicly available at https://github.com/intel/neural-compressor soon.

Hybrid LLMs pair softmax attention with linear-attention layers such as Gated DeltaNet (GDN), whose recurrent state summarizes the context in fixed size. Early community 4-bit quantizations of Qwen3.8-27B (48 GDN layers, 16 attention layers) left the GDN block in 8- or 16-bit precision -- especially its decay and write-strength gates -- on the intuition that errors in a recurrence accumulate over long contexts. We test that intuition by building Minima: NVFP4 W4A4 on all 496 linear layers, GDN included. Across perplexity at 4K/32K, MMLU-Pro, GSM8K, AIME'25, GPQA-Diamond, LiveCodeBench, and RULER retrieval to 64K, Minima matches BF16 within seed noise (5-task average -0.52) while being the smallest (17.5 GiB) and fastest-prefill (+14-19%) recipe we compare, and its 32K perplexity gap shrinks with position. A four-part mechanism study explains why: (i) NVFP4's 16-element block scaling localizes the residual stream's extreme outliers, equalizing activation error across layer roles; (ii) the supposedly fragile gate projections are the least sensitive -- softplus/exponential and sigmoid parameterizations compress ~11% GEMM error to ~2% output error; (iii) the delta-rule recurrence holds injected noise at a flat plateau over 32K tokens and forgets a state impulse within hundreds of steps, because each write overwrites the state along the current key direction; (iv) the per-token quantization cost washes out with context instead of compounding. We also repair a global-scale mismatch that arises when per-module-calibrated NVFP4 checkpoints are served by kernels that fuse those modules into one GEMM, and show calibrated FP8 KV-cache scales are performance-free. The result: a practical recipe -- quantize everything, ship KV scales -- and a mechanistic account of why the recurrent half of a hybrid LLM is the easy half to quantize. Checkpoint: https://huggingface.co/minima-ai/mnma_qwen3.8_27b_nvfp4

Quantizing AdamW's optimizer states reduces persistent storage, but quantization errors propagate through the moment recurrences and perturb subsequent adaptive updates. We redesign 4-bit optimizer-state quantization for AdamW from the perspective of rounding space: the coordinate in which a quantizer chooses between adjacent reconstruction levels. For the second moment, a local analysis of the quantization cell adjacent to zero shows that small mean state error need not imply small mean preconditioner error at the next step. A one-dimensional quadratic construction further shows qualitatively different optimization dynamics under state-space and preconditioner-space rounding. These results motivate Zero-Inclusive Preconditioner-space Stochastic Rounding (ZIP-SR), which retains zero in the second-moment codebook and computes stochastic-rounding probabilities in preconditioner space. As a complementary route, Zero-Excluding EDEN calibration (ZE-EDEN) uses a zero-excluding second-moment codebook and rescales the quantized second-moment block to mitigate the preconditioner distortion caused by the positive quantization floor. Both configurations use 4-bit NormalFloat (NF4) for the first moment, with targeted stochastic rounding of the LM-head first moment during the final 10\% of training. Across GPT- and Llama-style pretraining experiments ranging from 130M to 2.7B parameters, both methods reduce TorchAO 4-bit AdamW's mean validation-loss gap to 32-bit AdamW at every evaluated model size, with the largest reported gap reduction reaching 70\%. In full-parameter supervised fine-tuning, both recipes achieve lower validation loss than TorchAO while remaining close to 32-bit AdamW on downstream tasks.

Spiking Neural Networks (SNNs) have been widely praised for their high energy efficiency and immense potential. However, comprehensive research that critically contrasts and correlates SNNs with quantized Artificial Neural Networks (ANNs) remains scant, often leading to skewed comparisons lacking fairness towards ANNs. This paper introduces a unified perspective, illustrating that the time steps in SNNs and quantized bit-widths of activation values present analogous representations. Building on this, we present a more pragmatic and rational approach to estimating the energy consumption of SNNs. Diverging from the conventional Synaptic Operations (SynOps), we champion the "Bit Budget" concept. This notion permits an intricate discourse on strategically allocating computational and storage resources between weights, activation values, and temporal steps under stringent hardware constraints. Guided by the Bit Budget paradigm, we discern that pivoting efforts towards spike patterns and weight quantization, rather than temporal attributes, elicits profound implications for model performance. Utilizing the Bit Budget for holistic design consideration of SNNs elevates model performance across diverse data types, encompassing static imagery and neuromorphic datasets. Our revelations bridge the theoretical chasm between SNNs and quantized ANNs and illuminate a pragmatic trajectory for future endeavors in energy-efficient neural computations.

Voice activity detection (VAD) triggers downstream speech processing in always-on systems under strict memory, latency, and compute constraints. Recent compact models report strong accuracy but rely on components that are not widely supported: learnable filterbanks, recurrent layers, or non-causal post-processing. We propose kiloVAD, designed for embedded inference using standard Mel features, CNN-only layers, and tunable context/spectral parameters. We introduce per-layer structured pruning with self-distillation and angle-based quantization-aware training (QAT) that outperforms standard QAT by 1-4%. Evaluated per-frame under causal conditions, kiloVAD achieves 0.850 AUC on AVA-Speech with 2.1 k parameters and 200 ms context, establishing a new state of the art for causal, deployment-ready VAD.

Six-bit quantization (FP6) can effectively reduce the size of large language models (LLMs) and preserve the model quality consistently across varied applications. However, existing systems do not provide Tensor Core support for FP6 quantization and struggle to achieve practical performance improvements during LLM inference. It is challenging to support FP6 quantization on GPUs due to (1) unfriendly memory access of model weights with irregular bit-width and (2) high runtime overhead of weight de-quantization. To address these problems, we propose TC-FPx, the first full-stack GPU kernel design scheme with unified Tensor Core support of float-point weights for various quantization bit-width. We integrate TC-FPx kernel into an existing inference system, providing new end-to-end support (called FP6-LLM) for quantized LLM inference, where better trade-offs between inference cost and model quality are achieved. Experiments show that FP6-LLM enables the inference of LLaMA-70b using only a single GPU, achieving 1.69x-2.65x higher normalized inference throughput than the FP16 baseline. The source code will be publicly available soon.

We introduce two multilingual, multimodal foundation language models that power Apple Intelligence features across Apple devices and services: i a 3B-parameter on-device model optimized for Apple silicon through architectural innovations such as KV-cache sharing and 2-bit quantization-aware training; and ii a scalable server model built on a novel Parallel-Track Mixture-of-Experts PT-MoE transformer that combines track parallelism, mixture-of-experts sparse computation, and interleaved global-local attention to deliver high quality with competitive cost on Apple's Private Cloud Compute platform. Both models are trained on large-scale multilingual and multimodal datasets sourced via responsible web crawling, licensed corpora, and high-quality synthetic data, then further refined with supervised fine-tuning and reinforcement learning on a new asynchronous platform. The resulting models support several additional languages while understanding images and executing tool calls. In public benchmarks and human evaluations, both the server model and the on-device model match or surpass comparably sized open baselines. A new Swift-centric Foundation Models framework exposes guided generation, constrained tool calling, and LoRA adapter fine-tuning, allowing developers to integrate these capabilities with a few lines of code. The latest advancements in Apple Intelligence models are grounded in our Responsible AI approach with safeguards like content filtering and locale-specific evaluation, as well as our commitment to protecting our users' privacy with innovations like Private Cloud Compute.

We describe the pre-training, post-training, and quantization of Nemotron 3 Super, a 120 billion (active 12 billion) parameter hybrid Mamba-Attention Mixture-of-Experts model. Nemotron 3 Super is the first model in the Nemotron 3 family to 1) be pre-trained in NVFP4, 2) leverage LatentMoE, a new Mixture-of-Experts architecture that optimizes for both accuracy per FLOP and accuracy per parameter, and 3) include MTP layers for inference acceleration through native speculative decoding. We pre-trained Nemotron 3 Super on 25 trillion tokens followed by post-training using supervised fine tuning (SFT) and reinforcement learning (RL). The final model supports up to 1M context length and achieves comparable accuracy on common benchmarks, while also achieving up to 2.2x and 7.5x higher inference throughput compared to GPT-OSS-120B and Qwen3.5-122B, respectively. Nemotron 3 Super datasets, along with the base, post-trained, and quantized checkpoints, are open-sourced on HuggingFace.

We present Nemotron-Labs-3-Puzzle-75B-A9B, a compressed variant of Nemotron-3-Super optimized for interactive deployment. We designed the model to maximize server throughput under high user throughput constraints. In interactive serving workloads on a single 8xB200 node, Puzzle-75B-A9B achieves approximately 2x higher server throughput than Nemotron-3-Super at matched user throughput constraints. In ultra-long-context deployment on a single H100 GPU, the compressed model increases 1M-token concurrency from 1 request to 8 requests. Puzzle-75B-A9B is constructed using a multi-stage pipeline that combines the Iterative Puzzle compression framework with knowledge distillation, reinforcement learning, quantization, and a Multi-Token Prediction head. The compression process jointly optimizes heterogeneous MoE pruning, active parameter budget, and Mamba pruning to improve inference efficiency while preserving model quality. We evaluate Puzzle-75B-A9B on a broad suite of reasoning, coding, multilingual, long-context, and agentic benchmarks. Despite substantial compression, the model retains strong downstream accuracy relative to the parent model across a wide range of tasks. These results demonstrate that large hybrid MoE models can be substantially optimized for deployment efficiency while maintaining strong downstream capability.

Quantization has significantly improved the compute and memory efficiency of Large Language Model (LLM) training. However, existing approaches still rely on accumulating their updates in high-precision: concretely, gradient updates must be applied to a high-precision weight buffer, known as master weights. This buffer introduces substantial memory overhead, particularly for Sparse Mixture of Experts (SMoE) models, where model parameters and optimizer states dominate memory usage. To address this, we introduce the Error-Compensating Optimizer (ECO), which eliminates master weights by applying updates directly to quantized parameters. ECO quantizes weights after each step and carefully injects the resulting quantization error into the optimizer momentum, forming an error-feedback loop with no additional memory. We prove that, under standard assumptions and a decaying learning rate, ECO converges to a constant-radius neighborhood of the optimum, while naive master-weight removal can incur an error that is inversely proportional to the learning rate. We show empirical results for pretraining small Transformers (30-800M), a Gemma-3 1B model, and a 2.1B parameter Sparse MoE model with FP8 quantization, and fine-tuning DeepSeek-MoE-16B in INT4 precision. Throughout, ECO matches baselines with master weights up to near-lossless accuracy, significantly shifting the static memory vs validation loss Pareto frontier.

This paper introduces CO3 -- an algorithm for communication-efficient federated Deep Neural Network (DNN) training. CO3 takes its name from three processing applied which reduce the communication load when transmitting the local DNN gradients from the remote users to the Parameter Server. Namely: (i) gradient quantization through floating-point conversion, (ii) lossless compression of the quantized gradient, and (iii) quantization error correction. We carefully design each of the steps above to assure good training performance under a constraint on the communication rate. In particular, in steps (i) and (ii), we adopt the assumption that DNN gradients are distributed according to a generalized normal distribution, which is validated numerically in the paper. For step (iii), we utilize an error feedback with memory decay mechanism to correct the quantization error introduced in step (i). We argue that the memory decay coefficient, similarly to the learning rate, can be optimally tuned to improve convergence. A rigorous convergence analysis of the proposed CO3 with SGD is provided. Moreover, with extensive simulations, we show that CO3 offers improved performance when compared with existing gradient compression schemes in the literature which employ sketching and non-uniform quantization of the local gradients.

Vector quantization (VQ) is a key component in discrete tokenizers for image generation, but its training is often unstable due to straight-through estimation bias, one-step-behind updates, and sparse codebook gradients, which lead to suboptimal reconstruction performance and low codebook usage. In this work, we analyze these fundamental challenges and provide a simple yet effective solution. To maintain high codebook usage in VQ networks (VQN) during learning annealing and codebook size expansion, we propose VQBridge, a robust, scalable, and efficient projector based on the map function method. VQBridge optimizes code vectors through a compress-process-recover pipeline, enabling stable and effective codebook training. By combining VQBridge with learning annealing, our VQN achieves full (100%) codebook usage across diverse codebook configurations, which we refer to as FVQ (FullVQ). Through extensive experiments, we demonstrate that FVQ is effective, scalable, and generalizable: it attains 100% codebook usage even with a 262k-codebook, achieves state-of-the-art reconstruction performance, consistently improves with larger codebooks, higher vector channels, or longer training, and remains effective across different VQ variants. Moreover, when integrated with LlamaGen, FVQ significantly enhances image generation performance, surpassing visual autoregressive models (VAR) by 0.5 and diffusion models (DiT) by 0.2 rFID, highlighting the importance of high-quality tokenizers for strong autoregressive image generation.

Vision-Language-Action (VLA) models generalize semantically well but often lack fine-grained modeling of world dynamics. We present MotuBrain, a unified World Action Model that jointly models video and action under a UniDiffuser formulation with a three-stream Mixture-of-Transformers architecture. A single model supports policy learning, world modeling, video generation, inverse dynamics, and joint video-action prediction, while scaling to heterogeneous multimodal data such as video-only, task-agnostic, and cross-embodiment robot data. Building on Motus, MotuBrain further introduces unified multiview modeling, an independent text stream for stronger language-action coupling, a shared cross-embodiment action representation, and an efficient post-training and deployment recipe for long-horizon real-world control. Our inference stack combines step reduction, compilation, FP8 quantization, DiT caching, V2A-style action-only inference, and real-time chunked closed-loop execution, achieving over 50x speedup over a naive baseline and up to 11 Hz inference. Experimentally, MotuBrain achieves 95.8% and 96.1% average success on RoboTwin 2.0 under clean and randomized settings, respectively, attains the strongest reported EWMScore in our WorldArena comparison, and adapts to new humanoid embodiments with only 50--100 trajectories. These results show that unified world action models can scale in generality, predictive accuracy, and real-world deployability.

Monocular depth estimation is a ubiquitous yet highly ill-posed computer vision task, with downstream applications in scene reconstruction, computational photography, and robotics, among others. Despite the field's maturity, recent models still struggle to generalize to out-of-distribution inputs and to produce sharp and detailed depth maps. In this paper, we revisit Marigold, a set of techniques for repurposing modern image generation and editing models, powered by the diffusion transformer (DiT) architecture, into state-of-the-art monocular depth estimators. Our recipes target single-step inference from pretrained multi-step flow-matching models, with quantization where needed, preserving model capacity while remaining cheap to run. We analyze the artifacts of naive training and identify two effective remedies: aligning the model's internal representations with semantic features extracted from ground-truth, and adopting a 2-stage fine-tuning protocol built around a novel Sinkhorn-based loss. The results are crisper, cleaner depth maps that generalize well out-of-distribution, with 16-26% improvement in AbsRel over the previous best on KITTI and ETH3D. Qualitatively, our model resolves fur, foliage, and hair-thin edges that have eluded prior models. Furthermore, Marigold V2 achieves state-of-the-art results when applied to other dense regression tasks, such as surface normals estimation and intrinsic image decomposition. Project website: https://hf.co/spaces/huawei-bayerlab/marigold-v2-web

BERT based ranking models have achieved superior performance on various information retrieval tasks. However, the large number of parameters and complex self-attention operation come at a significant latency overhead. To remedy this, recent works propose late-interaction architectures, which allow pre-computation of intermediate document representations, thus reducing the runtime latency. Nonetheless, having solved the immediate latency issue, these methods now introduce storage costs and network fetching latency, which limits their adoption in real-life production systems. In this work, we propose the Succinct Document Representation (SDR) scheme that computes highly compressed intermediate document representations, mitigating the storage/network issue. Our approach first reduces the dimension of token representations by encoding them using a novel autoencoder architecture that uses the document's textual content in both the encoding and decoding phases. After this token encoding step, we further reduce the size of entire document representations using a modern quantization technique. Extensive evaluations on passage re-reranking on the MSMARCO dataset show that compared to existing approaches using compressed document representations, our method is highly efficient, achieving 4x-11.6x better compression rates for the same ranking quality.

The NVIDIA Blackwell architecture, with native support for the ultra-fine-grained NVFP4 format, opens new opportunities for accelerating large language model (LLM) inference. NVFP4's micro-block design, such as a group size of 16, offers strong representational flexibility for capturing local weight distributions and isolating outliers, but it also introduces a large and highly sensitive space of per-group scaling factors. Existing post-training quantization (PTQ) methods primarily focus on refining quantized weight values, leaving this scale-selection step underexplored. To address this gap, we propose H-Scale, a lightweight post-processing method for NVFP4 per-group scale refinement. Instead of minimizing plain weight reconstruction error, H-Scale selects hardware-valid group scales using a diagonal second-order proxy derived from calibration activations, thereby targeting layer output perturbation more directly. It is designed as a drop-in replacement for RTN-style scale selection in diverse NVFP4 pipelines, requires only modest offline calibration, and introduces strictly zero overhead at inference time. Under a fixed evaluation protocol, experiments on mainstream LLMs show that H-Scale generally improves a broad range of NVFP4 baselines and brings several variants closer to the BF16 reference.

Modern recurrent layers are emerging as a promising path toward edge deployment of foundation models, especially in the context of large language models (LLMs). Compressing the whole input sequence in a finite-dimensional representation enables recurrent layers to model long-range dependencies while maintaining a constant inference cost for each token and a fixed memory requirement. However, the practical deployment of LLMs in resource-limited environments often requires further model compression, such as quantization and pruning. While these techniques are well-established for attention-based models, their effects on recurrent layers remain underexplored. In this preliminary work, we focus on post-training quantization for recurrent LLMs and show that Mamba models exhibit the same pattern of outlier channels observed in attention-based LLMs. We show that the reason for the difficulty of quantizing SSMs is caused by activation outliers, similar to those observed in transformer-based LLMs. We report baseline results for post-training quantization of Mamba that do not take into account the activation outliers and suggest first steps for outlier-aware quantization.

This report describes our approach to the Efficient Qwen Competition, where the goal is to enable low-latency serving of Qwen3.5-4B on a resource-constrained NVIDIA A10G GPU. Our system combines a quantized target model with speculative decoding. To recover accuracy, we apply quantization-aware distillation to the target model while retaining the original quantization grid. To speed up decoding, a block-diffusion drafter specialized for the quantized target model is trained using a two-stage procedure: first learning from the high-precision target and then adapting to the low-precision target. Because the drafter is invoked at every speculative decoding step, we further reduce its overhead with quantization and sliding-window attention, preserving draft-token acceptance while improving long-context decoding latency. As a result, our submission achieves a 6.978times average speedup over the baseline while satisfying the required quality thresholds, ranking 3rd overall. We hope these results provide useful insights for practical LLM inference. The code and resources are available at https://github.com/nota-github/adaptfm-quant-dflash

Diffusion models have achieved great success in image synthesis through iterative noise estimation using deep neural networks. However, the slow inference, high memory consumption, and computation intensity of the noise estimation model hinder the efficient adoption of diffusion models. Although post-training quantization (PTQ) is considered a go-to compression method for other tasks, it does not work out-of-the-box on diffusion models. We propose a novel PTQ method specifically tailored towards the unique multi-timestep pipeline and model architecture of the diffusion models, which compresses the noise estimation network to accelerate the generation process. We identify the key difficulty of diffusion model quantization as the changing output distributions of noise estimation networks over multiple time steps and the bimodal activation distribution of the shortcut layers within the noise estimation network. We tackle these challenges with timestep-aware calibration and split shortcut quantization in this work. Experimental results show that our proposed method is able to quantize full-precision unconditional diffusion models into 4-bit while maintaining comparable performance (small FID change of at most 2.34 compared to >100 for traditional PTQ) in a training-free manner. Our approach can also be applied to text-guided image generation, where we can run stable diffusion in 4-bit weights with high generation quality for the first time.

The intensive computational burden of Stable Diffusion (SD) for text-to-image generation poses a significant hurdle for its practical application. To tackle this challenge, recent research focuses on methods to reduce sampling steps, such as Latent Consistency Model (LCM), and on employing architectural optimizations, including pruning and knowledge distillation. Diverging from existing approaches, we uniquely start with a compact SD variant, BK-SDM. We observe that directly applying LCM to BK-SDM with commonly used crawled datasets yields unsatisfactory results. It leads us to develop two strategies: (1) leveraging high-quality image-text pairs from leading generative models and (2) designing an advanced distillation process tailored for LCM. Through our thorough exploration of quantization, profiling, and on-device deployment, we achieve rapid generation of photo-realistic, text-aligned images in just two steps, with latency under one second on resource-limited edge devices.

Most AI projects start with a Python notebook running on a single laptop; however, one usually needs to go through a mountain of pains to scale it to handle larger dataset (for both experimentation and production deployment). These usually entail many manual and error-prone steps for the data scientists to fully take advantage of the available hardware resources (e.g., SIMD instructions, multi-processing, quantization, memory allocation optimization, data partitioning, distributed computing, etc.). To address this challenge, we have open sourced BigDL 2.0 at https://github.com/intel-analytics/BigDL/ under Apache 2.0 license (combining the original BigDL and Analytics Zoo projects); using BigDL 2.0, users can simply build conventional Python notebooks on their laptops (with possible AutoML support), which can then be transparently accelerated on a single node (with up-to 9.6x speedup in our experiments), and seamlessly scaled out to a large cluster (across several hundreds servers in real-world use cases). BigDL 2.0 has already been adopted by many real-world users (such as Mastercard, Burger King, Inspur, etc.) in production.

Sign-language interpretation in public communication relies on qualified professional interpreters and can be difficult to scale, motivating robotic signing as a complementary accessibility interface. We present RoBoSTAR, a text-conditioned sign language production (SLP) framework for generating human-centric sign motion that can be retargeted for robotic execution, with speech supported optionally through an external ASR front end. Conventional autoregressive approaches flatten motion into a single full-resolution token sequence, forcing long-range and local dependencies to be modeled at a uniform temporal granularity. RoBoSTAR instead combines part-wise Finite Scalar Quantization with next-scale autoregression, generating motion over progressively finer temporal resolutions while predicting synchronized body and hand tokens in parallel within each step. This coarse-to-fine formulation provides compact long-range context before progressively refining motion details, while self-conditioning and context corruption improve robustness to cross-scale prediction errors. The generated motion is subsequently retargeted for physical humanoid execution. Extensive qualitative and quantitative evaluations are conducted to demonstrate the effectiveness of RoBoSTAR.

Reinforcement learning (RL) for large language models (LLMs) is increasingly bottlenecked by rollout (generation), where long output sequence lengths make attention and KV-cache memory dominate end-to-end step time. FP8 offers an attractive lever for accelerating RL by reducing compute cost and memory traffic during rollout, but applying FP8 in RL introduces unique engineering and algorithmic challenges: policy weights change every step (requiring repeated quantization and weight synchronization into the inference engine) and low-precision rollouts can deviate from the higher-precision policy assumed by the trainer, causing train-inference mismatch and potential instability. This report presents a practical FP8 rollout stack for LLM RL, implemented in the veRL ecosystem with support for common training backends (e.g., FSDP/Megatron-LM) and inference engines (e.g., vLLM/SGLang). We (i) enable FP8 W8A8 linear-layer rollout using blockwise FP8 quantization, (ii) extend FP8 to KV-cache to remove long-context memory bottlenecks via per-step QKV scale recalibration, and (iii) mitigate mismatch using importance-sampling-based rollout correction (token-level TIS/MIS variants). Across dense and MoE models, these techniques deliver up to 44% rollout throughput gains while preserving learning behavior comparable to BF16 baselines.

The Stable Diffusion Model (SDM) is a popular and efficient text-to-image (t2i) generation and image-to-image (i2i) generation model. Although there have been some attempts to reduce sampling steps, model distillation, and network quantization, these previous methods generally retain the original network architecture. Billion scale parameters and high computing requirements make the research of model architecture adjustment scarce. In this work, we first explore the computational redundancy part of the network, and then prune the redundancy blocks of the model and maintain the network performance through a progressive incubation strategy. Secondly, in order to maintaining the model performance, we add cross-layer multi-expert conditional convolution (CLME-Condconv) to the block pruning part to inherit the original convolution parameters. Thirdly, we propose a global-regional interactive (GRI) attention to speed up the computationally intensive attention part. Finally, we use semantic-aware supervision (SAS) to align the outputs of the teacher model and student model at the semantic level. Experiments show that this method can effectively train a lightweight model close to the performance of the original SD model, and effectively improve the model speed under limited resources. Experiments show that the proposed method can effectively train a light-weight model close to the performance of the original SD model, and effectively improve the model speed under limited resources. After acceleration, the UNet part of the model is 22% faster and the overall speed is 19% faster.

Large language models (LLMs) require significant memory to store Key-Value (KV) embeddings in their KV cache, especially when handling long-range contexts. Quantization of these KV embeddings is a common technique to reduce memory consumption. This work introduces PolarQuant, a novel quantization method employing random preconditioning and polar transformation. Our method transforms the KV embeddings into polar coordinates using an efficient recursive algorithm and then quantizes resulting angles. Our key insight is that, after random preconditioning, the angles in the polar representation exhibit a tightly bounded and highly concentrated distribution with an analytically computable form. This nice distribution eliminates the need for explicit normalization, a step required by traditional quantization methods which introduces significant memory overhead because quantization parameters (e.g., zero point and scale) must be stored in full precision per each data block. PolarQuant bypasses this normalization step, enabling substantial memory savings. The long-context evaluation demonstrates that PolarQuant compresses the KV cache by over x4.2 while achieving the best quality scores compared to the state-of-the-art methods.

Image compression-based approaches for defending against the adversarial-example attacks, which threaten the safety use of deep neural networks (DNN), have been investigated recently. However, prior works mainly rely on directly tuning parameters like compression rate, to blindly reduce image features, thereby lacking guarantee on both defense efficiency (i.e. accuracy of polluted images) and classification accuracy of benign images, after applying defense methods. To overcome these limitations, we propose a JPEG-based defensive compression framework, namely "feature distillation", to effectively rectify adversarial examples without impacting classification accuracy on benign data. Our framework significantly escalates the defense efficiency with marginal accuracy reduction using a two-step method: First, we maximize malicious features filtering of adversarial input perturbations by developing defensive quantization in frequency domain of JPEG compression or decompression, guided by a semi-analytical method; Second, we suppress the distortions of benign features to restore classification accuracy through a DNN-oriented quantization refine process. Our experimental results show that proposed "feature distillation" can significantly surpass the latest input-transformation based mitigations such as Quilting and TV Minimization in three aspects, including defense efficiency (improve classification accuracy from sim20% to sim90% on adversarial examples), accuracy of benign images after defense (le1% accuracy degradation), and processing time per image (sim259times Speedup). Moreover, our solution can also provide the best defense efficiency (sim60% accuracy) against the recent adaptive attack with least accuracy reduction (sim1%) on benign images when compared with other input-transformation based defense methods.

This note clarifies the relationship between the recent TurboQuant work and the earlier DRIVE (NeurIPS 2021) and EDEN (ICML 2022) schemes. DRIVE is a 1-bit quantizer that EDEN extended to any b>0 bits per coordinate; we refer to them collectively as EDEN. First, TurboQuant_{mse} is a special case of EDEN obtained by fixing EDEN's scalar scale parameter to S=1. EDEN supports both biased and unbiased quantization, each optimized by a different S (chosen via methods described in the EDEN works). The fixed choice S=1 used by TurboQuant is generally suboptimal, although the optimal S for biased EDEN converges to 1 as the dimension grows; accordingly TurboQuant_{mse} approaches EDEN's behavior for large d. Second, TurboQuant_{prod} combines a biased (b-1)-bit EDEN step with an unbiased 1-bit QJL quantization of the residual. It is suboptimal in three ways: (1) its (b-1)-bit step uses the suboptimal S=1; (2) its 1-bit unbiased residual quantization has worse MSE than (unbiased) 1-bit EDEN; (3) chaining a biased (b-1)-bit step with a 1-bit unbiased residual step is inferior to unbiasedly quantizing the input directly with b-bit EDEN. Third, some of the analysis in the TurboQuant work mirrors that of the EDEN works: both exploit the connection between random rotations and the shifted Beta distribution, use the Lloyd-Max algorithm, and note that Randomized Hadamard Transforms can replace uniform random rotations. Experiments support these claims: biased EDEN (with optimized S) is more accurate than TurboQuant_{mse}, and unbiased EDEN is markedly more accurate than TurboQuant_{prod}, often by more than a bit (e.g., 2-bit EDEN beats 3-bit TurboQuant_{prod}). We also repeat all accuracy experiments from the TurboQuant paper, showing that EDEN outperforms it in every setup we have tried.

The deployment of Large Language Models (LLMs) on edge devices is fundamentally constrained by the "Memory Wall" -- a hardware limitation where memory bandwidth, not compute, becomes the bottleneck. Recent 1.58-bit quantization techniques (e.g., BitNet b1.58) dramatically reduce memory footprint but typically incur a perplexity degradation of 20-25% compared to FP16 baselines. In this work, we introduce Hybrid Gated Flow (HGF), a dual-stream architecture that couples a 1.58-bit ternary backbone with a learnable, low-rank FP16 correction path controlled by adaptive gates. Through extensive experiments on the TinyStories dataset across two training regimes (2500 and 3500 steps), we demonstrate that HGF 5.4 achieves a validation loss of 0.9306 compared to BitNet's 1.0294, recovering approximately 55% of the quality gap between pure ternary quantization and the FP16 baseline (0.8490). This recovery is achieved with only ~12-15% memory overhead beyond the ternary backbone. Furthermore, we provide empirical evidence for an emergent phenomenon: quantization as structural regularization. While a full-precision differential attention baseline (Diff_Only) exhibited training instability with validation loss exceeding 1.68, the ternary-anchored HGF maintained robust convergence throughout training. Finally, we report preliminary results extending this architecture to 1.2B and 3B parameter models trained on SlimPajama and FineWeb-Edu. These larger-scale experiments confirm that the architectural stability and quality recovery observed in small-scale proxies scale linearly to production-grade language modeling regimes.

Deep neural networks are vulnerable to universal adversarial perturbation (UAP), an instance-agnostic perturbation capable of fooling the target model for most samples. Compared to instance-specific adversarial examples, UAP is more challenging as it needs to generalize across various samples and models. In this paper, we examine the serious dilemma of UAP generation methods from a generalization perspective -- the gradient vanishing problem using small-batch stochastic gradient optimization and the local optima problem using large-batch optimization. To address these problems, we propose a simple and effective method called Stochastic Gradient Aggregation (SGA), which alleviates the gradient vanishing and escapes from poor local optima at the same time. Specifically, SGA employs the small-batch training to perform multiple iterations of inner pre-search. Then, all the inner gradients are aggregated as a one-step gradient estimation to enhance the gradient stability and reduce quantization errors. Extensive experiments on the standard ImageNet dataset demonstrate that our method significantly enhances the generalization ability of UAP and outperforms other state-of-the-art methods. The code is available at https://github.com/liuxuannan/Stochastic-Gradient-Aggregation.

Diffusion generative models have become the standard for producing high-quality, coherent video content, yet their slow inference speeds and high computational demands hinder practical deployment. Although both quantization and sparsity can independently accelerate inference while maintaining generation quality, naively combining these techniques in existing training-free approaches leads to significant performance degradation due to the lack of joint optimization. We introduce FPSAttention, a novel training-aware co-design of FP8 quantization and sparsity for video generation, with a focus on the 3D bi-directional attention mechanism. Our approach features three key innovations: 1) A unified 3D tile-wise granularity that simultaneously supports both quantization and sparsity; 2) A denoising step-aware strategy that adapts to the noise schedule, addressing the strong correlation between quantization/sparsity errors and denoising steps; 3) A native, hardware-friendly kernel that leverages FlashAttention and is implemented with optimized Hopper architecture features for highly efficient execution. Trained on Wan2.1's 1.3B and 14B models and evaluated on the VBench benchmark, FPSAttention achieves a 7.09x kernel speedup for attention operations and a 4.96x end-to-end speedup for video generation compared to the BF16 baseline at 720p resolution-without sacrificing generation quality.

We introduce TurboDiffusion, a video generation acceleration framework that can speed up end-to-end diffusion generation by 100-200x while maintaining video quality. TurboDiffusion mainly relies on several components for acceleration: (1) Attention acceleration: TurboDiffusion uses low-bit SageAttention and trainable Sparse-Linear Attention (SLA) to speed up attention computation. (2) Step distillation: TurboDiffusion adopts rCM for efficient step distillation. (3) W8A8 quantization: TurboDiffusion quantizes model parameters and activations to 8 bits to accelerate linear layers and compress the model. In addition, TurboDiffusion incorporates several other engineering optimizations. We conduct experiments on the Wan2.2-I2V-14B-720P, Wan2.1-T2V-1.3B-480P, Wan2.1-T2V-14B-720P, and Wan2.1-T2V-14B-480P models. Experimental results show that TurboDiffusion achieves 100-200x speedup for video generation even on a single RTX 5090 GPU, while maintaining comparable video quality. The GitHub repository, which includes model checkpoints and easy-to-use code, is available at https://github.com/thu-ml/TurboDiffusion.

Large language models are limited in deployment by GPU memory and inference latency. We present Minima, a production compression pipeline that learns where and how to structurally compress a Transformer and turns that compression into real serving gains. Minima trains a lightweight convolutional predictor to estimate layer- and patch-level sensitivity, applies a mixture of Tucker, tensor-train, and tensor-ring decompositions to low-sensitivity regions, performs a short healing fine-tune, and executes the resulting operators with custom Triton and CUDA kernels. The reduced memory footprint enables speculative decoding with a small draft model and a larger verifier. On Qwen3-32B at an 8k-token context window, Minima reduces peak VRAM from 64 GiB to 40 GiB. For a single active request, throughput increases from 40 tokens per second (baseline) to 50 tokens per second (Minima) and 75 tokens per second (Minima with speculative decoding). Under 50 parallel requests, throughput is 34, 44, and 53 tokens per second respectively, showing that Minima remains effective under high concurrency even when speculative decoding gains compress. We position Minima relative to recent tensor-network, low-rank plus quantization, and cross-layer sharing methods, and argue that it is a practical step toward more aggressive structural compression via shared tensor backbones with tiny per-layer adapters.

Diffusion-based Large Language Models(DLLMs) enable parallel generation via Semi-Autoregressive (SAR) decoding in text generation. However, current methods suffer from severe operator-level redundancy: they recompute the entire sequence during denoising steps, ignoring that the prefix and masked suffix remain invariant within a block. We propose LaCache, a training-free acceleration framework that alleviates this redundancy through lossless caching and mixed precision. Specifically, LaCache employs Lossless State Memoization (LSM) by caching three types of intermediate results: (i) EmbedCache for embedding outputs, (ii) RoPECache for token-wise pre-attention states, and (iii) FACache for the online softmax statistics within FlashAttention. These caches allow the model to skip redundant computation on unchanged tokens without altering the output. To further alleviate memory-bandwidth bottlenecks, LaCache inegrates a per-group FP8 quantization strategy for FFN layers, tailored to step-dependent activation distributions across the diffusion process. Experiments demonstrate that LaCache alone achieves approximately 1.3X end-to-end speedup over vanilla DLLM. When combined with existing acceleration methods, LaCache reaches up to 40.2X end-to-end speedup while maintaining comparable task accuracy.

Quantization is a technique for reducing deep neural networks (DNNs) training and inference times, which is crucial for training in resource constrained environments or applications where inference is time critical. State-of-the-art (SOTA) quantization approaches focus on post-training quantization, i.e., quantization of pre-trained DNNs for speeding up inference. While work on quantized training exists, most approaches require refinement in full precision (usually single precision) in the final training phase or enforce a global word length across the entire DNN. This leads to suboptimal assignments of bit-widths to layers and, consequently, suboptimal resource usage. In an attempt to overcome such limitations, we introduce AdaPT, a new fixed-point quantized sparsifying training strategy. AdaPT decides about precision switches between training epochs based on information theoretic conditions. The goal is to determine on a per-layer basis the lowest precision that causes no quantization-induced information loss while keeping the precision high enough such that future learning steps do not suffer from vanishing gradients. The benefits of the resulting fully quantized DNN are evaluated based on an analytical performance model which we develop. We illustrate that an average speedup of 1.27 compared to standard training in float32 with an average accuracy increase of 0.98% can be achieved for AlexNet/ResNet on CIFAR10/100 and we further demonstrate these AdaPT trained models achieve an average inference speedup of 2.33 with a model size reduction of 0.52.

Diffusion models are well known for their ability to generate a high-fidelity image for an input prompt through an iterative denoising process. Unfortunately, the high fidelity also comes at a high computational cost due the inherently sequential generative process. In this work, we seek to optimally balance quality and computational cost, and propose a framework to allow the amount of computation to vary for each prompt, depending on its complexity. Each prompt is automatically routed to the most appropriate text-to-image generation function, which may correspond to a distinct number of denoising steps of a diffusion model, or a disparate, independent text-to-image model. Unlike uniform cost reduction techniques (e.g., distillation, model quantization), our approach achieves the optimal trade-off by learning to reserve expensive choices (e.g., 100+ denoising steps) only for a few complex prompts, and employ more economical choices (e.g., small distilled model) for less sophisticated prompts. We empirically demonstrate on COCO and DiffusionDB that by learning to route to nine already-trained text-to-image models, our approach is able to deliver an average quality that is higher than that achievable by any of these models alone.

Diffusion-based large language models (DLLMs) have shown promise for non-autoregressive text generation, but their deployment is constrained by large model sizes and heavy computational costs. Post-training quantization (PTQ), a widely used method for compressing and accelerating Large Language Models (LLMs), suffers from severe accuracy degradation and reduced generalization performance when directly applied to DLLMs (e.g., AWQ suffers a 16% accuracy drop on LLADA under W4A4). This paper explores how DLLMs' key mechanisms - dynamic masking, iterative generation, bidirectional attention - clash with quantization. We identify three core issues: 1) Iterative generation and dynamic masking ratios lead to distinct token distributions across decoding steps, which are not adequately captured by existing PTQ calibration methods; 2) Quantization errors are accumulated and amplified progressively during iteration in DLLMs, causing quantized models to perform worse as decoding steps progress; 3) Unmasked tokens stabilize while masked remain probabilistic, making overall feature distribution incompatible with existing PTQ methods. To address these issues, we propose DLLMQuant, a PTQ framework tailored for DLLMs, which incorporates three novel techniques: 1) Temporal-Mask Adaptive Sampling (TMAS), a calibration method that accounts for both time and mask factors, with the capacity to capture distributions across timesteps. 2) Interaction-Aware Activation Quantization (IA-AQ), which utilizes bidirectional attention's interaction signals to dynamically allocate quantization resources. 3) Certainty-Guided Quantization (CGQ), which integrates mask status and token scores as key weighting criteria into error compensation, making weight quantization more suitable for DLLMs. Experiments show that DLLMQuant achieves significant performance gains while enhancing efficiency.

The blooming of social media and face recognition (FR) systems has increased people's concern about privacy and security. A new type of adversarial privacy cloak (class-universal) can be applied to all the images of regular users, to prevent malicious FR systems from acquiring their identity information. In this work, we discover the optimization dilemma in the existing methods -- the local optima problem in large-batch optimization and the gradient information elimination problem in small-batch optimization. To solve these problems, we propose Gradient Accumulation (GA) to aggregate multiple small-batch gradients into a one-step iterative gradient to enhance the gradient stability and reduce the usage of quantization operations. Experiments show that our proposed method achieves high performance on the Privacy-Commons dataset against black-box face recognition models.

Low-bit attention, such as SageAttention, has emerged as an effective approach for accelerating model inference, but its applicability to training remains poorly understood. In prior work, we introduced SageBwd, a trainable INT8 attention that quantizes six of seven attention matrix multiplications while preserving fine-tuning performance. However, SageBwd exhibited a persistent performance gap to full-precision attention (FPA) during pre-training. In this work, we investigate why this gap occurs and demonstrate that SageBwd matches full-precision attention during pretraining. Through experiments and theoretical analysis, we reach a few important insights and conclusions: (i) QK-norm is necessary for stable training at large tokens per step, (ii) quantization errors primarily arise from the backward-pass score gradient dS, (iii) reducing tokens per step enables SageBwd to match FPA performance in pre-training, and (iv) K-smoothing remains essential for training stability, while Q-smoothing provides limited benefit during pre-training.