Daily Papers

Geometric alignment scores based on Gram determinants provide a compact way to model higher-order consistency among modalities, yet how such scores respond to modality degradation is poorly understood. This paper asks whether the response of a multimodal geometric score is determined primarily by the magnitude of the perturbation-induced displacement. Using frozen cohorts from MSR-VTT (N=878) and DiDeMo (N=980), we apply controlled video blur and audio noise and analyze the response in the relational geometry on which the score is defined. Displacement magnitude explains at most 15% of the out-of-sample variance in the absolute response, and magnitude-matched pairs respond systematically differently, so scalar magnitude does not organize the response. The closed-form first-order expansion of the Gramian volume yields the Directional Geometric Response (DGR): the projection of the displacement onto the local volume gradient, which jointly captures the clean operating point, displacement magnitude, and displacement direction. The absolute first-order DGR term explains the observed response with out-of-sample R^2 of 0.838-0.969, matched-magnitude ranking accuracies of 0.864-0.963, and response-sign accuracies of 0.909-0.989, whereas the tested direction-free alternatives remain weak or unstable under the corresponding evaluation protocols. A pre-specified gain-normalization candidate, V/(g_V+eps), fails its predictability and clean-order gates. DGR uses the observed degraded-state displacement and is therefore an explanatory quantity, not a deployment-time predictor: geometric response depends on where the representation operates, how far degradation moves the relational geometry, and in which direction it moves.

Standard LLM evaluation practices compress diverse abilities into single scores, obscuring their inherently multidimensional nature. We present JE-IRT, a geometric item-response framework that embeds both LLMs and questions in a shared space. For question embeddings, the direction encodes semantics and the norm encodes difficulty, while correctness on each question is determined by the geometric interaction between the model and question embeddings. This geometry replaces a global ranking of LLMs with topical specialization and enables smooth variation across related questions. Building on this framework, our experimental results reveal that out-of-distribution behavior can be explained through directional alignment, and that larger norms consistently indicate harder questions. Moreover, JE-IRT naturally supports generalization: once the space is learned, new LLMs are added by fitting a single embedding. The learned space further reveals an LLM-internal taxonomy that only partially aligns with human-defined subject categories. JE-IRT thus establishes a unified and interpretable geometric lens that connects LLM abilities with the structure of questions, offering a distinctive perspective on model evaluation and generalization.

The term "hallucination" converge different failure modes with specific geometric signatures in embedding space. We propose a taxonomy identifying three types: unfaithfulness (Type I: ignoring provided context), confabulation (Type II: inventing semantically foreign content), and factual error (Type III: wrong details within correct conceptual frames). We introduce two detection methods grounded in this taxonomy: the Semantic Grounding Index (SGI) for Type I, which measures whether a response moves toward provided context on the unit hypersphere, and the Directional Grounding Index (DGI) for Type II, which measures displacement geometry in context-free settings. DGI achieves AUROC=0.958 on human-crafted confabulations with 3.8% cross-domain degradation. External validation on three independently collected human-annotated benchmarks -WikiBio GPT-3, FELM, and ExpertQA- yields domain-specific AUROC 0.581-0.695, with DGI outperforming an NLI CrossEncoder baseline on expert-domain data, where surface entailment operates at chance. On LLM-generated benchmarks, detection is domain-local. We examine the Type III boundary through TruthfulQA, where apparent classifier signal (Logistic Regression with AUROC 0.731) is traced to a stylistic annotation confound: false answers are geometrically closer to queries than truthful ones, a pattern incompatible with factual-error detection. This identifies a theoretical constraint from a methodological limitation.

The capacity to precisely edit genomes has outpaced our ability to predict the consequences. A cell can be genetically perfect and therapeutically useless: edited exactly as intended, yet unstable, drifting toward unintended fates, or selected for properties that compromise safety. This paradox reflects a deeper gap in how we evaluate biological intervention. Current frameworks excel at measuring what was done to a cell but remain blind to what the cell has become. We argue that this blindness stems from treating cells as collections of independent variables rather than as dynamical systems occupying positions on high-dimensional state manifolds. Drawing on Waddington's epigenetic landscape, we propose geometric stability as a missing axis of evaluation: the directional coherence of cellular responses to perturbation. This metric distinguishes interventions that guide cells coherently toward stable states from those that scatter them across the state manifold. Validation across diverse perturbation datasets reveals that geometric stability captures regulatory architecture invisible to conventional metrics, discriminating pleiotropic master regulators from lineage-specific factors without prior biological annotation. As precision medicine increasingly relies on cellular reprogramming, the question shifts from ``did the intervention occur?'' to ``is the resulting state stable?'' Geometric stability provides a framework for answering.

A central aspiration of mechanistic interpretability is controllability: if we know where a behavior is represented in a model's activations, we should be able to modify it. This rests on a hidden premise -- that the direction which detects a behavior and the direction which controls it are the same, or close. We test this geometrically: what is the angle between the direction that best detects a behavior and the one that best causes it? If detection implies control the cosine is near 1; otherwise it quantifies a detection-intervention gap. On Gemma 2-2B-it, output format (clean JSON vs markdown fencing) collapses both roles onto one axis. Hallucination does not: the model detects fake entities with perfect linear separability (AUC = 1.000 from layer 5), yet that direction sits at cos = 0.12 (about 83 degrees) from the direction producing a refusal -- a small, reproducible alignment, far from the cos = 1 that "detection is control" would require. A detector built from activations, with no chosen tokens, likewise fails to align (cos = -0.06). The gap generalizes: across four models from three families and two scales (1B-9B), cos stays in [0.12, 0.20], identical before and after instruction tuning (0.1197 vs 0.1200), placing its origin in pretraining. A 15-degree rotation toward the refusal direction partially bridges it -- 73% and 60% refusal on two held-out fake-entity categories at 1.8% false positives. We then ask whether this cosine predicts steerability, and it does not: detection is a high-dimensional class, not a single direction, and what separates the steerable case is functional, not readable from a static angle. The cosine is a weight-computable signature of the dissociation between knowing and steering, not a predictor of it.

Neural representations carry rich geometric structure; but does that structure causally shape behavior? To address this question, we intervene along paths through activation space defined by different geometries, and measure the behavioral trajectories they induce. In particular, we test whether interventions that respect the geometry of activation space will yield behaviors close to those the model exhibits naturally. Concretely, we first fit an activation manifold M_h to representations and a behavior manifold M_y to output probability distributions. We then test the link M_h leftrightarrow M_y via interventions: we find that steering along M_h, which we term manifold steering, yields behavioral trajectories that follow M_y, while linear steering -- which assumes a Euclidean geometry -- cuts through off-manifold regions and hence produces unnatural outputs. Moreover, optimizing interventions in activation space to produce paths along M_y recovers activation trajectories that trace the curvature of M_h. We demonstrate this bidirectional relationship between the geometry of representation and behavior across tasks and modalities. In language models, we use reasoning tasks with cyclic and sequential geometries as well as in-context learning tasks with more complex graph geometries. In a video world model, we use a task with geometry corresponding to physical dynamics. Overall, our work shows that geometry in neural representation is not merely incidental, but is in fact the proper object for enabling principled control via intervention on internals. This recasts the core problem of steering from finding the right direction to finding the right geometry.

Single-cell CRISPR screens summarize each perturbation by how far cells move from their unperturbed state, averaging over cell-to-cell variation. Whether the cells moved together is not captured: two perturbations with identical effect magnitude can differ qualitatively, one driving cells along a shared trajectory, the other scattering them around the same mean. We define SheshaP coherence (S_p), the mean cosine similarity between individual cell displacement vectors and their mean, and ask what it adds across six Perturb-seq datasets (2,285 perturbations; CRISPRa, CRISPRi, Cas9 knockout). Coherence and effect magnitude are closely coupled (Spearman ρ=0.84--0.98), and the coupling persists in a foundation-model embedding, under alternative effect-size definitions, and when analysis is restricted to responding cells. Associations reported without conditioning on effect size largely recover it, shown here for two comparisons that vanish under conditioning. Effect size accounts for 89--96\% of coherence variance; within the remainder, coherence is negatively associated with apoptosis and p53 signalling in the two largest screens. Two standard responder classifiers agree on only 68\% of cells. Directional coherence is largely a restatement of effect magnitude, and heterogeneity measures should report their redundancy with effect size as a matter of course. S_p is implemented in the open-source shesha-geometry Python package.

Trial-to-trial variability limits how reliably neural population geometry can be estimated, while comparisons across populations depend on neuron and trial counts, response quality, and clustered sampling. We quantified within-session geometric reliability using Shesha, the Spearman correlation between representational dissimilarity matrices estimated from independent trial subsets, in all 39 Steinmetz Neuropixels sessions and in olfactory bulb and piriform cortex recordings from Bolding and Franks. Steinmetz analyses matched neurons and repetitions, compared observed reliability with a stationary residual-bootstrap expectation, and used mouse-level or mouse-clustered inference. Mean matched reliability was 0.0402 across 312 area-by-session recordings. Regional differences and reliability above the stationary benchmark did not survive correction. Temporal effects received the strongest support: interleaving early and late trials increased reliability relative to blocked allocation (Δ=0.02666, q=0.001953), and RDM similarity declined with within-session lag (mean mouse-level slope =-0.01912, q=0.001953; n=10 mice). Outer-cross-fitted reliability was not associated with choice-direction coupling or stimulus or response-direction decoding after correction. Olfactory comparisons remained descriptive because few paired sessions and no animal identities were available. In held-out simulations, associative recurrence outperformed feedforward subspace denoising but not divisive normalization. Representational geometry became less reproducible with temporal separation within a session, and comparisons across neural populations require sampling calibration and independent inference.

When retrieval-augmented generation (RAG) systems hallucinate, what geometric trace does this leave in embedding space? We introduce the Semantic Grounding Index (SGI), defined as the ratio of angular distances from the response to the question versus the context on the unit hypersphere S^{d-1}.Our central finding is semantic laziness: hallucinated responses remain angularly proximate to questions rather than departing toward retrieved contexts. On HaluEval (n=5,000), we observe large effect sizes (Cohen's d ranging from 0.92 to 1.28) across five embedding models with mean cross-model correlation r=0.85. Crucially, we derive from the spherical triangle inequality that SGI's discriminative power should increase with question-context angular separation θ(q,c)-a theoretical prediction confirmed empirically: effect size rises monotonically from d=0.61 -low θ(q,c), to d=1.27 -high θ(q,c), with AUC improving from 0.72 to 0.83. Subgroup analysis reveals that SGI excels on long responses (d=2.05) and short questions (d=1.22), while remaining robust across context lengths. Calibration analysis yields ECE=0.10, indicating SGI scores can serve as probability estimates, not merely rankings. A critical negative result on TruthfulQA (AUC=0.478) establishes that angular geometry measures topical engagement rather than factual accuracy. SGI provides computationally efficient, theoretically grounded infrastructure for identifying responses that warrant verification in production RAG deployments.

PGD adversarial training, the standard robustness method, can reduce Jacobian Frobenius norm yet worsen clean-input geometry (e.g., TDI 1.336 vs. ERM 1.093). We show this is not an implementation artifact but a theorem-level consequence of supervised learning. We prove that any encoder minimizing supervised loss must retain non-zero sensitivity along directions correlated with training labels, including directions that are nuisance at test time. This holds across proper scoring rules, architectures, and dataset sizes. We call this the geometric blind spot of supervised learning. This theorem unifies four empirical phenomena often treated separately: non-robust features, texture bias, corruption fragility, and the robustness-accuracy tradeoff. It also explains why suppressing sensitivity in one adversarial direction can redistribute sensitivity elsewhere. We introduce Trajectory Deviation Index (TDI), a diagnostic of geometric isotropy. Unlike CKA, intrinsic dimension, or Jacobian Frobenius norm alone, TDI captures the failure mode above. In our experiments, PGD attains low Frobenius norm but high TDI, while PMH attains the lowest TDI with one additional training term and no architectural changes. Across seven tasks, BERT/SST-2, and ImageNet ViT-B/16 (backbone family underlying CLIP/DINO/SAM), the blind spot is measurable and repairable. It appears at foundation-model scale, worsens with model scale and task-specific fine-tuning, and is substantially reduced by PMH. PMH also leads on non-Gaussian corruption types (blur/brightness/contrast) without corruption-specific training.

We examine how closely pretrained LeWorldModel (LeWM) reproduces the effects of small action changes. Using matched simulator and model responses, we measure action sensitivity with Gram matrices at three perturbation scales. Across nearly a thousand states from Reacher and OGBench Cube, the most sensitive action directions differ by median angles of about 36^circ and 42^circ, respectively, at the smallest scale. Increasing the perturbation tenfold reduces median normalized Gram discrepancy by roughly 70\% on Reacher and 47\% on Cube. Geometry measured in pixels and embeddings varies more across scales than the chosen physical-state geometry. On held-out directions, environment Grams achieve median embedding response errors of 17\% and 28\%, compared with 26\% and 38\% for an isotropic reference with the same trace. LeWM's errors are higher at this scale. These findings support scale-specific evaluation of action sensitivity; its effect on control remains an open question.

Differential geometric approaches to the analysis and processing of data in the form of symmetric positive definite (SPD) matrices have had notable successful applications to numerous fields including computer vision, medical imaging, and machine learning. The dominant geometric paradigm for such applications has consisted of a few Riemannian geometries associated with spectral computations that are costly at high scale and in high dimensions. We present a route to a scalable geometric framework for the analysis and processing of SPD-valued data based on the efficient computation of extreme generalized eigenvalues through the Hilbert and Thompson geometries of the semidefinite cone. We explore a particular geodesic space structure based on Thompson geometry in detail and establish several properties associated with this structure. Furthermore, we define a novel iterative mean of SPD matrices based on this geometry and prove its existence and uniqueness for a given finite collection of points. Finally, we state and prove a number of desirable properties that are satisfied by this mean.

Object detection under image degradation can benefit from clean-image supervision, but aggregate gains do not imply that transferred representation changes are uniformly useful. We study how clean task knowledge affects degraded-image representations and whether local responses to structured representation directions can be characterized geometrically. Using paired clean and Gaussian-degraded BDD100K images, we show that clean-teacher distillation improves observed detection accuracy while producing heterogeneous object-level transfer. We isolate a representation component complementary to direct clean-teacher alignment and map it into the distilled student space through an orthogonal bridge. Controlled interventions rescue 13.22% of objects lost under the distilled representation, versus 4.30% under norm-matched random perturbations, with very low harm on preserved objects. We introduce task-sensitive geometry, a gradient-derived channel-space geometry constructed from normalized detection-loss gradients. On a reserved cohort, mapped-complement orientation within this frozen geometry is positively associated with local intervention-response magnitude after controlling for intervention magnitude (partial Spearman ρ = 0.242, 95% CI [0.108, 0.359]). The relationship eplicates on independent data (ρ = 0.180) and with RT-DETR-L (ρ = 0.227), but not for the direct clean-teacher residual family, and it weakens for large interventions. Routing rules and specialized distillation objectives based on these signals do not yield statistically reliable gains over CLEANKD. These results support a local, direction-family-dependent task-sensitive geometry while showing that converting such structure into improved global training remains an open problem.

Recent advances in generative models highlight the power of geometry-aware modeling in manifold-constrained settings. Yet, for natural images, the field remains confined to Euclidean assumptions, failing to exploit the potential of intrinsic geometric structures within the data. In this work, we investigate the geometry of natural images and observe that semantic information is predominantly encoded in directional components, while norm components can be approximated by the global average. This property holds across both RGB and latent spaces, suggesting that natural images can be effectively modeled on a hypersphere. Building on this finding, we introduce Spherical Optimal Transport Flow Matching (SOT-CFM), which utilizes angular distance, and Spherical Flow Matching (SFM), which constrains dynamics directly on the manifold. Our experiments demonstrate that these geometry-aware methods achieve superior performance against Euclidean baselines. Ultimately, this work provides a novel perspective that bridges the gap between Riemannian manifold-based modeling and natural image generation.

Despite progress in vision-language models, 3D spatial reasoning from 2D images remains challenging. Text-based methods describe intermediate geometry with discrete tokens, limiting fidelity for continuous spatial relations. Continuous latents offer richer representations, but a single latent type does not explicitly separate the cues needed across spatial tasks. Decomposed spatial latents address this by representing position, direction, and global geometry separately under geometric supervision. Yet the geometry representation can still collapse toward one dominant direction, and unrestricted attention can leave the latents underused during answer learning. We introduce GeoLatent, combining Common--Residual Geometry Alignment (CR-GEO) with routed optimization to structure the geometry states while promoting latent-mediated answer learning. CR-GEO separates shared from residual teacher geometry; routed optimization jointly trains geometry and language, temporarily directs visual answer learning through the latents, and restores full attention with geometry supervision. In controlled comparisons, CR-GEO raises geometry effective rank from 1.00 to 3.87, while blocking latent readout at the bottleneck lowers direction accuracy from 89.1% to 25.8% on 128 fixed questions. After recovery, the differentiated geometry representation and latent-mediated visual route remain available alongside direct image access. GeoLatent achieves 73.0% on SPAR-Bench and 72.1% on SPBench, outperforming previously reported methods on both.

Omni-directional (360°) cameras provide embodied agents with a holistic view of their surroundings, making them suited for directional reasoning in tasks such as navigation and object search. Existing Vision Language Models (VLMs) project 360° observations to 2D equirectangular projection (ERP) images and process them using architectures designed for perspective images. However, they ignore the spherical nature of 360° observations, where each pixel represents a viewing direction relative to the agent. Consequently, their direction estimates often become inconsistent under camera view transformations caused by agent motion. This limitation is particularly critical for map-free navigation, where the agent must continuously estimate the target direction in its egocentric frame. We propose EAGOR, a training-free, geometry-aware framework for embodied 360° directional reasoning. Instead of predicting target directions as ERP image coordinates, EAGOR formulates directional reasoning as recursive Bayesian estimation directly on the sphere. It maintains a continuous belief over target directions and propagates it equivariantly under agent motion without training the backbone VLMs. To achieve this, we introduce the Spherical Harmonic Belief Field (SH-BF), whose spherical harmonic representation provides a globally defined, rotation-aware basis for directional estimation on the spherical manifold. This formulation eliminates ERP seam discontinuities, latitude distortions, and interpolation errors. We evaluate EAGOR on two benchmark datasets and real-world experiments with a legged robot across directional reasoning tasks. EAGOR consistently outperforms existing methods, achieving average relative gains of +34.4% and +45.6% on HOS and OSR-Bench, respectively, while improving navigation success by +14.6%, reducing step count by 17.7%, and lowering mean angular error by 24.5%.

We present a computational framework that transforms single images into 3D physical objects. The visual geometry of a physical object in an image is determined by three orthogonal attributes: mechanical properties, external forces, and rest-shape geometry. Existing single-view 3D reconstruction methods often overlook this underlying composition, presuming rigidity or neglecting external forces. Consequently, the reconstructed objects fail to withstand real-world physical forces, resulting in instability or undesirable deformation -- diverging from their intended designs as depicted in the image. Our optimization framework addresses this by embedding physical compatibility into the reconstruction process. We explicitly decompose the three physical attributes and link them through static equilibrium, which serves as a hard constraint, ensuring that the optimized physical shapes exhibit desired physical behaviors. Evaluations on a dataset collected from Objaverse demonstrate that our framework consistently enhances the physical realism of 3D models over existing methods. The utility of our framework extends to practical applications in dynamic simulations and 3D printing, where adherence to physical compatibility is paramount.

Safety-aligned LLMs can exhibit emergent misalignment (EM): narrow domain adaptation unexpectedly triggers catastrophic safety failures across unrelated domains. Prior static analyses leave training dynamics unmapped, while existing defenses rely on heuristics that degrade utility. We present a dynamic, second-order geometric study of EM. Tracking training trajectories reveals that directional Hessian curvature concentrates sharply on semantic pivot tokens. Grassmannian projections show that, in most settings, harmful-safe gap widens mainly because safe-gradient overlap declines. Leveraging these insights, we introduce a parameter-level Geometric Mitigation Framework that orthogonally projects empirical harmful gradient subspace out of parameter updates. On Qwen2.5-14B-IT, our defense suppresses free-generation EM by up to 80.0%; across the other three of four open-weight instruction-based model families (3B--20B), where single-layer behavioral EM is already near zero, teacher-forced evaluation shows same harmful subspace controls the conditional support of frozen EM responses. Crucially, these diagnostics unmask the illusion of behavioral safety: the same subspace remains measurable and steerable in models where behavioral EM is near zero. Code: https://github.com/WeiqiaoQUE/mechanistic-emergent-misalignment.

We investigate the relationship between representation geometry and neural network performance. Analyzing 52 pretrained ImageNet models across 13 architecture families, we show that effective dimension -- an unsupervised geometric metric -- strongly predicts accuracy. Output effective dimension achieves partial r=0.75 (p < 10^(-10)) after controlling for model capacity, while total compression achieves partial r=-0.72. These findings replicate across ImageNet and CIFAR-10, and generalize to NLP: effective dimension predicts performance for 8 encoder models on SST-2/MNLI and 15 decoder-only LLMs on AG News (r=0.69, p=0.004), while model size does not (r=0.07). We establish bidirectional causality: degrading geometry via noise causes accuracy loss (r=-0.94, p < 10^(-9)), while improving geometry via PCA maintains accuracy across architectures (-0.03pp at 95% variance). This relationship is noise-type agnostic -- Gaussian, Uniform, Dropout, and Salt-and-pepper noise all show |r| > 0.90. These results establish that effective dimension provides domain-agnostic predictive and causal information about neural network performance, computed entirely without labels.

A reliable language model should be able to signal, prior to generation, when a query falls outside its knowledge. We investigate whether representation geometry can provide such a pre-generation signal by measuring the deviation of hidden states from an answerable reference set, requiring no labeled failure data and no access to model outputs. Across three instruction-tuned models (Llama 3.1-8B, Qwen 2.5-7B, and Mistral-7B-Instruct) and three prompt forms (Math, Fact, Code), we find that geometry primarily encodes task form. Within mathematical prompts, unanswerable inputs consistently deviate from the answerable centroid, yielding strong separation (ROC-AUC 0.78-0.84). This single-pass pre-generation signal outperforms a simple refusal baseline and compares favorably to self-consistency. It also captures cases where models do not explicitly refuse. In contrast, no reliable geometric signal emerges for factual prompts, indicating that the effect is form-conditional rather than universal. Code prompts show large effect sizes with higher variance, suggesting partial generalization beyond mathematical form. A layer-wise analysis reveals that the signal arises in early layers and gradually attenuates toward the output. These results suggest that answerability-related geometry is established before the final stages of generation. Together, these findings indicate that geometric deviation can serve as a lightweight pre-generation signal that is reliable in structured domains with formal answerability constraints, with clear boundaries on where it generalizes.

We tackle the problem of estimating a Manhattan frame, i.e. three orthogonal vanishing points, and the unknown focal length of the camera, leveraging a prior vertical direction. The direction can come from an Inertial Measurement Unit that is a standard component of recent consumer devices, e.g., smartphones. We provide an exhaustive analysis of minimal line configurations and derive two new 2-line solvers, one of which does not suffer from singularities affecting existing solvers. Additionally, we design a new non-minimal method, running on an arbitrary number of lines, to boost the performance in local optimization. Combining all solvers in a hybrid robust estimator, our method achieves increased accuracy even with a rough prior. Experiments on synthetic and real-world datasets demonstrate the superior accuracy of our method compared to the state of the art, while having comparable runtimes. We further demonstrate the applicability of our solvers for relative rotation estimation. The code is available at https://github.com/cvg/VP-Estimation-with-Prior-Gravity.

Generating a street-level 3D scene from a single satellite image is a crucial yet challenging task. Current methods present a stark trade-off: geometry-colorization models achieve high geometric fidelity but are typically building-focused and lack semantic diversity. In contrast, proxy-based models use feed-forward image-to-3D frameworks to generate holistic scenes by jointly learning geometry and texture, a process that yields rich content but coarse and unstable geometry. We attribute these geometric failures to the extreme viewpoint gap and sparse, inconsistent supervision inherent in satellite-to-street data. We introduce Sat3DGen to address these fundamental challenges, which embodies a geometry-first methodology. This methodology enhances the feed-forward paradigm by integrating novel geometric constraints with a perspective-view training strategy, explicitly countering the primary sources of geometric error. This geometry-centric strategy yields a dramatic leap in both 3D accuracy and photorealism. For validation, we first constructed a new benchmark by pairing the VIGOR-OOD test set with high-resolution DSM data. On this benchmark, our method improves geometric RMSE from 6.76m to 5.20m. Crucially, this geometric leap also boosts photorealism, reducing the Fréchet Inception Distance (FID) from sim40 to 19 against the leading method, Sat2Density++, despite using no extra tailored image-quality modules. We demonstrate the versatility of our high-quality 3D assets through diverse downstream applications, including semantic-map-to-3D synthesis, multi-camera video generation, large-scale meshing, and unsupervised single-image Digital Surface Model (DSM) estimation. The code has been released on https://github.com/qianmingduowan/Sat3DGen.

When a language model asserts that "the capital of Australia is Sydney," does it know this is wrong? We characterize the geometry of correctness representations across 9 models from 5 architecture families. The structure is simple: the discriminative signal occupies 3-8 dimensions, performance degrades with additional dimensions, and no nonlinear classifier improves over linear separation. Centroid distance in the low-dimensional subspace matches trained probe performance (0.90 AUC), enabling few-shot detection: on GPT-2, 25 labeled examples achieve 89% of full-data accuracy. We validate causally through activation steering: the learned direction produces 10.9 percentage point changes in error rates while random directions show no effect. Internal probes achieve 0.80-0.97 AUC; output-based methods (P(True), semantic entropy) achieve only 0.44-0.64 AUC. The correctness signal exists internally but is not expressed in outputs. That centroid distance matches probe performance indicates class separation is a mean shift, making detection geometric rather than learned.

Recent works augment Vision-Language Models with geometry features from pretrained 3D models, expecting that the geometric signal will boost spatial reasoning. However, we find that simply fusing geometry features and training on standard spatial QA yields only marginal improvements on high-level multi-hop tasks. We attribute this gap to a training-signal problem: standard spatial QA can be largely answered from visual features and language priors, so the geometry pathway receives weak gradients and fails to integrate with the visual features. To provide a training signal that requires geometry, we propose novel-view semantic rendering as an auxiliary training task that requires the model to predict the semantic layout of an unobserved viewpoint, inspired by humans' ability to mentally simulate novel viewpoints during spatial reasoning. This task encourages joint use of both pathways: geometry provides pose-dependent visibility, while vision provides semantic content. Our auxiliary task yields consistent improvements over the geometry-augmented baseline across all three benchmarks (up to +1.6 on VSI-Bench, +2.2 on ReVSI, +2.9 on our 3D-Point-QA dataset) and our full model surpasses prior open-source methods on VSI-Bench and on ReVSI. Project page: https://yuqunw.github.io/Render2Reason/.

Road geometry (e.g., crests, sags, and speed humps) and surface conditions (e.g., wet or icy pavement) affect how vehicles move, what drivers and onboard cameras observe, and how much clearance remains between vehicles. Editing these properties in a driving scene therefore requires corresponding changes in vehicle motion. Capturing these differences in a driving video requires a road edit to propagate to vehicle motion, camera viewpoint, and the clearance between vehicles. We present TerrainForge, a framework for generating road geometry-focused counterfactuals from reconstructed multi-vehicle driving episodes. A unified road model connects scene deformation with four-wheel vehicle dynamics, allowing crests, sags, speed humps, and friction changes to propagate through vehicle motion, camera viewpoint, and inter-vehicle clearance. Vehicle dynamics are evaluated against CarSim, and prescribed road geometry is verified in reconstructed Waymo scenes. Across 18 episodes, leaving surrounding vehicles on their recorded trajectories instead of recomputing their responses produces median peak differences in predicted ego-lead distance of 1.52 m for crests and 1.41 m for sags. We further simulate the ego response to 15,758 road edits across 983 braking episodes, pairing each edit with its safety outcomes relative to an unedited replay. These pairs train a first-stage screening surrogate that takes the original driving context and candidate road-edit parameters as input and predicts the resulting change in the ego's terminal gap. On held-out scenes, this prediction achieves 22-40% lower mean absolute error than predicting no change, so candidates can be screened cheaply before the full multi-vehicle rollout.

The wide-scale use of sparse autoencoders (SAEs) as interpretability tools is limited by inconsistent links between SAE features and model behavior. Features with clear activation descriptions may have weak or unexpected causal effects; steering can vary across prompts or oppose the intended direction; and activation-based feature selection can miss features that produce the desired output change. Prior work has studied feature geometry inside the model, where features are computed. We instead study the geometry of changes in model logits caused by feature interventions. We introduce Feature-Effect Geometry Analysis (FEGA), an unsupervised framework that removes the same active SAE feature across contexts and analyzes the resulting cloud of logit changes. Across SAE variants, consistent one-dimensional effects are rare: few features behave like reusable directions. To interpret this variation, we distinguish value-like features, tied to static information such as factual attributes, from pointer-like features, associated with context-dependent operations. Value-like features more often exhibit structured, low-dimensional effects, although these effects typically span several directions. Pointer-like features, by contrast, predominantly exhibit diffuse effects. Our results show that a feature can be interpretable and causally relevant without providing a stable direction for steering.

From a single image, visual cues can help deduce intrinsic and extrinsic camera parameters like the focal length and the gravity direction. This single-image calibration can benefit various downstream applications like image editing and 3D mapping. Current approaches to this problem are based on either classical geometry with lines and vanishing points or on deep neural networks trained end-to-end. The learned approaches are more robust but struggle to generalize to new environments and are less accurate than their classical counterparts. We hypothesize that they lack the constraints that 3D geometry provides. In this work, we introduce GeoCalib, a deep neural network that leverages universal rules of 3D geometry through an optimization process. GeoCalib is trained end-to-end to estimate camera parameters and learns to find useful visual cues from the data. Experiments on various benchmarks show that GeoCalib is more robust and more accurate than existing classical and learned approaches. Its internal optimization estimates uncertainties, which help flag failure cases and benefit downstream applications like visual localization. The code and trained models are publicly available at https://github.com/cvg/GeoCalib.

Multimodal large language models (MLLMs) have made significant progress in integrating visual and linguistic understanding. Existing benchmarks typically focus on high-level semantic capabilities, such as scene understanding and visual reasoning, but often overlook a crucial, foundational ability: geometric perception. Geometric perception involves understanding geometric shapes, structures, and spatial relationships, which are essential for supporting higher-level semantic tasks. Despite its importance, this capability remains underexplored in current MLLM research. To address this gap, we introduce GePBench, a novel benchmark designed to assess the geometric perception abilities of MLLMs. Our extensive evaluations reveal that current state-of-the-art MLLMs exhibit significant deficiencies in geometric perception tasks. Furthermore, we show that models trained with GePBench data demonstrate substantial improvements on a wide range of benchmark tasks, highlighting the critical role of geometric perception in enabling advanced multimodal applications. Our code and datasets will be publicly available.

Problems involving geometric data arise in a variety of fields, including computer vision, robotics, chemistry, and physics. Such data can take numerous forms, such as points, direction vectors, planes, or transformations, but to date there is no single architecture that can be applied to such a wide variety of geometric types while respecting their symmetries. In this paper we introduce the Geometric Algebra Transformer (GATr), a general-purpose architecture for geometric data. GATr represents inputs, outputs, and hidden states in the projective geometric algebra, which offers an efficient 16-dimensional vector space representation of common geometric objects as well as operators acting on them. GATr is equivariant with respect to E(3), the symmetry group of 3D Euclidean space. As a transformer, GATr is scalable, expressive, and versatile. In experiments with n-body modeling and robotic planning, GATr shows strong improvements over non-geometric baselines.

Geometry Foundation Models (GFMs) have substantially advanced monocular 3D reconstruction, yet extending this capability to 4D dynamic understanding remains a fundamental challenge. Most existing motion perception methods (e.g., sparse tracking, dense point-wise flow) treat motion as independent point-wise displacements, ignoring the structured nature of physical motion. However, real-world objects usually obey rigid-body kinematics, and points thus usually move collectively, not in isolation. Motion itself possesses geometric structure: physical objects undergo a set of rigid-body transformations governed by SE(3), rather than unstructured point-wise displacements. Building on this insight, we propose SM4RT, a Structured Motion 4D Reconstruction Transformer for end-to-end 3D reconstruction and structured motion perception. SM4RT introduces Structure-of-Motion to represent scene dynamics, where scene motion is decomposed into a compact set of motion bases, each represented as a temporal sequence of 6D twists in SE(3). Dense scene motion is then recovered by sparse, time-shared per-pixel assignment weights over these bases, ensuring points on the same object share a common rigid-body motion trajectory. SM4RT introduces a parallel motion geometry encoder and decoder that jointly infer 3D geometry, world-coordinate motion, and scene kinematic structure in a single forward pass from monocular RGB video. SM4RT achieves strong motion reconstruction performance while preserving the geometric structure of scene motion.

Neural representations of 3D data have been widely adopted across various applications, particularly in recent work leveraging coordinate-based networks to model scalar or vector fields. However, these approaches face inherent challenges, such as handling thin structures and non-watertight geometries, which limit their flexibility and accuracy. In contrast, we propose a novel geometric data representation that models geometry as distributions-a powerful representation that makes no assumptions about surface genus, connectivity, or boundary conditions. Our approach uses diffusion models with a novel network architecture to learn surface point distributions, capturing fine-grained geometric details. We evaluate our representation qualitatively and quantitatively across various object types, demonstrating its effectiveness in achieving high geometric fidelity. Additionally, we explore applications using our representation, such as textured mesh representation, neural surface compression, dynamic object modeling, and rendering, highlighting its potential to advance 3D geometric learning.

Existing activation steering methods often assume that a high-level concept can be mediated by a single steering direction. To support this, two complementary interventions should be achieved: additive steering should induce the target behavior, while directional ablation should suppress it. Yet behaviors may occupy richer activation geometries beyond a single direction, and semantically similar behaviors may be represented by distinct directions. In this work, we study how many directions can reliably control two different types of refusal behaviors: refusal triggered by the safety alignment and refusal in general contexts. Given the limited expressive capability of a single steering vector, we study the general setting of steering subspaces and introduce the notion of steering dimensionality as the minimum subspace dimensionality required to reliably control a behavior. We characterize sufficient steering subspaces that cover the full extent of the target behavior through both the (monotonic) improvement before the sufficient dimensionality, and the saturation beyond it. Empirically, we find that refusal triggered by safety alignment is 1-dim steerable, while multiple distinct steering directions can achieve comparable control. In contrast, refusal in general contexts exhibits substantially richer activation geometry where even 5-dim steering subspaces fail to reliably capture its full steerable variation. Our results reveal that the activation geometry underlying refusal is highly context-dependent and can be substantially more complex than a single linear steering direction.

Do contemporary diffusion models preserve the class geometry of hyperspherical data? Standard diffusion models rely on isotropic Gaussian noise in the forward process, inherently favoring Euclidean spaces. However, many real-world problems involve non-Euclidean distributions, such as hyperspherical manifolds, where class-specific patterns are governed by angular geometry within hypercones. When modeled in Euclidean space, these angular subtleties are lost, leading to suboptimal generative performance. To address this limitation, we introduce HyperSphereDiff to align hyperspherical structures with directional noise, preserving class geometry and effectively capturing angular uncertainty. We demonstrate both theoretically and empirically that this approach aligns the generative process with the intrinsic geometry of hyperspherical data, resulting in more accurate and geometry-aware generative models. We evaluate our framework on four object datasets and two face datasets, showing that incorporating angular uncertainty better preserves the underlying hyperspherical manifold. Resources are available at: {https://github.com/IAB-IITJ/Harmonizing-Geometry-and-Uncertainty-Diffusion-with-Hyperspheres/}

Existing Large Multimodal Models (LMMs) struggle with mathematical geometric reasoning due to a lack of high-quality image-text paired data. Current geometric data generation approaches, which apply preset templates to generate geometric data or use Large Language Models (LLMs) to rephrase questions and answers (Q&A), unavoidably limit data accuracy and diversity. To synthesize higher-quality data, we propose a two-stage Reverse Chain-of-Thought (R-CoT) geometry problem generation pipeline. First, we introduce GeoChain to produce high-fidelity geometric images and corresponding descriptions highlighting relations among geometric elements. We then design a Reverse A&Q method that reasons step-by-step based on the descriptions and generates questions in reverse from the reasoning results. Experiments demonstrate that the proposed method brings significant and consistent improvements on multiple LMM baselines, achieving new performance records in the 2B, 7B, and 8B settings. Notably, R-CoT-8B significantly outperforms previous state-of-the-art open-source mathematical models by 16.6% on MathVista and 9.2% on GeoQA, while also surpassing the closed-source model GPT-4o by an average of 13% across both datasets. The code is available at https://github.com/dle666/R-CoT.

Large language models often answer structurally unanswerable questions, such as computing cot(-540°) or evaluating (1).startswith("1"), instead of abstaining. We ask whether this failure reflects missing recognition or failed routing from recognition to abstention. Across instruction-tuned models from 1.7B to 70B parameters, a single linear direction in the hidden state separates answerable from structurally impossible math and code prompts, showing that models represent impossibility before generation. Yet this recognition direction is nearly orthogonal to the canonical safety-refusal direction that mediates trained harmful-content refusal. An in-domain behavior-defined invalidity-aware direction is closer to recognition, but only partially aligned with it, and remains near-orthogonal to safety refusal. Generation-time steering along the recognition direction changes invalidity-aware behavior bidirectionally and dose-responsively on structural math and code cells, while random directions do not. Base/instruct comparisons further show that the low-cosine geometry is already present at the pretraining endpoint. The confident-on-impossible failure is therefore better explained as a routing failure than as an encoding failure: the model has a usable "no admissible answer" signal, but the safety-refusal pathway is not aligned to use it.

The phase evolution of gravitational waves encodes critical information about the orbital dynamics of binary systems. In this work, we test the robustness of parameterized tests against unmodeled deviations from general relativity. We demonstrate that these parameterized tests are flexible and sensitive in detecting generic deviations in the waveform using the Cutler-Vallisneri bias formalism. This universality arises from examining the inherent geometry of the waveform signal and understanding how biases manifest. We show how Bayes factors are governed by the intrinsic geometry of the waveform signal manifold when parameterized tests are used to approximate generic violations of GR. We use the singular value decomposition to propose templates that are orthogonal to parameterized tests, identifying degeneracies and enhancing the detection of potential deviations. More broadly, the geometric framework developed here clarifies -- at a fundamental level -- how subtle waveform effects (including orbital eccentricity, spin precession, waveform systematics, and instrumental glitches) can mimic one another in data, and when they are intrinsically distinguishable.

In machine learning, there is a long history of trying to build neural networks that can learn from fewer example data by baking in strong geometric priors. However, it is not always clear a priori what geometric constraints are appropriate for a given task. Here, we explore the possibility that one can uncover useful geometric inductive biases by studying how training molds the Riemannian geometry induced by unconstrained neural network feature maps. We first show that at infinite width, neural networks with random parameters induce highly symmetric metrics on input space. This symmetry is broken by feature learning: networks trained to perform classification tasks learn to magnify local areas along decision boundaries. This holds in deep networks trained on high-dimensional image classification tasks, and even in self-supervised representation learning. These results begin to elucidate how training shapes the geometry induced by unconstrained neural network feature maps, laying the groundwork for an understanding of this richly nonlinear form of feature learning.

While researchers are finding concepts represented as linear directions in language models, a bag of linear directions fails to capture relational structure. To better understand this dichotomy, we study a model with known linear representations, but trained in a highly structured domain -- the board game Othello. While the model's internal board-state representation is linearly decodable, we find additional structure in the form of tensor product representations (TPRs). We train TPR probes to recover shared structure amongst the linear probes, yielding a factorization into square-embeddings, color-embeddings, and a binding matrix that composes them to construct the model's board-state representation. We find geometric signatures within the weights of our TPR probe that align with the structure of the board, but perhaps more importantly, that the linear probes can be recovered directly from the parameters of our TPR probe. Our findings suggest that directional representations may be projections of more structured underlying representations.

We propose GeoFormer, a Geometry-Aware Transformer architecture specifically designed for prestack seismic data. Unlike Vision Transformer, whose tokens are extracted from 2D patches and primarily encode visual patterns, GeoFormer is designed for prestack seismic data by explicitly incorporating acquisition geometry. Each seismic trace is represented by a 5D unit consisting of the waveform and four source-receiver coordinates, from which two geometric attributes are derived: offset and relative elevation, where relative elevation is the receiver elevation minus the source elevation. GeoFormer therefore performs trace-level tokenization, where each token combines the waveform with these geometric attributes. To exploit these geometric attributes, GeoFormer introduces three geometry injection mechanisms operating at different levels of the Transformer pipeline. At the token level, GeomMLP replaces the classification token with a per-trace geometric representation derived from offset and elevation. At the normalization level, GeomAdaLN replaces uniform layer normalization with geometry-conditioned feature modulation. At the attention level, GeomAttnBias injects a parameter-free physical prior that geometrically proximate traces should attend more to each other. We validate GeoFormer on first-arrival picking, a representative seismic processing task that relies heavily on acquisition geometry. Experiments on four field datasets demonstrate that GeoFormer outperforms Vision Transformer and two task-specific baselines. Crucially, GeoFormer maintains robust picking accuracy under strong noise because its trace-level tokens encode geometric attributes that provide a physical prior independent of waveform quality. Ablation studies confirm that GeomMLP, GeomAdaLN, and GeomAttnBias each contribute to GeoFormer's picking accuracy.

We construct nets of curves in a rectangle R with special properties. The net is formed by two families of curves, "horizontal" and "vertical", each family foliates R, and every horizontal curve meets every vertical curve orthogonally. Moreover, every horizontal curve started at the left edge of R arrives to the right edge of R at the same height, and every vertical curve started at the bottom edge of R arrives to the top edge of R at a prescribed in advance longitude. The latter longitude function as a map from bottom to top can be chosen in advance as any small perturbation of the identity. Our motivation for this was to design some elliptic divergence form operators, for instance on one of the domains bounded by a Reifenberg flat curve in the plane, with the scalar coefficient and the corresponding elliptic measure being absolutely continuous with respect to the natural measure on the boundary (an object of a separate paper). The construction of our net of curves in a rectangle can also be interpreted as control problem, has an interest on its own, and, likely, has other applications.

Large Language Models' safety-aligned behaviors, such as refusing harmful queries, can be represented by linear directions in activation space. Previous research modeled safety behavior with a single direction, limiting mechanistic understanding to an isolated safety feature. In this work, we discover that safety-aligned behavior is jointly controlled by multi-dimensional directions. Namely, we study the vector space of representation shifts during safety fine-tuning on Llama 3 8B for refusing jailbreaks. By studying orthogonal directions in the space, we first find that a dominant direction governs the model's refusal behavior, while multiple smaller directions represent distinct and interpretable features like hypothetical narrative and role-playing. We then measure how different directions promote or suppress the dominant direction, showing the important role of secondary directions in shaping the model's refusal representation. Finally, we demonstrate that removing certain trigger tokens in harmful queries can mitigate these directions to bypass the learned safety capability, providing new insights on understanding safety alignment vulnerability from a multi-dimensional perspective. Code and artifacts are available at https://github.com/BMPixel/safety-residual-space.

We revisit the geometric theory of defects. In the differential-geometric models of defects that have been adopted since the 1950s, dislocations have been associated with torsion, disclinations with the full curvature, and point defects with the first kind trace of non-metricity. The mainstream formulation exhibits several conceptual and technical shortcomings, most notably a hierarchy inconsistency, the non-exictence of a genuine metric formulation, and the potential emergence of Ostrogradsky-type instabilities. These issues have motivated us to develop a new framework, namely a generalized teleparallel geometric theory of defects. In our model, dislocations are identified with the trace of torsion, disclinations with the second kind trace of the non-metricity, and point defects with the first kind trace of the non-metricity. In addition, we retain the scalar part torsion as a free parameter for describing some possible unknown degrees of freedom in the theory of defects. The proposed geometric theory of defects is free from all of the aforementioned drawbacks and is therefore worthy of further investigation. To ensure the coherence and completeness of the discussion, we begin our analysis with elastic deformations, then summarize the existing metric-affine geometric theory of defects, and finally proceed to our original contribution, namely the new theory introduced here. We formulate the entire theory in Eulerian coordinates. Naturally, all results can be reformulated in Lagrangian coordinates as well. All analyses and formulae are expressed in the language of exterior algebra and are carried out in coordinate-independent orthonormal frames.

Spatial reasoning remains a persistent weakness of vision-language models (VLMs), because RGB inputs do not directly provide geometric evidence. Existing remedies either inject 3D into the model at inference, paying architecture and latency costs, or train with outcome rewards that supervise only the final answer. Spatial errors originate in perception: a misjudged depth or direction can be corrected only by the scene's true geometry, which the 3D-scanned sources of spatial training corpora already provide. We propose GPD (Geometry-Privileged Distillation), which makes geometric evidence the privilege in on-policy self-distillation (OPSD). For each question, depth, semantic, and bird's-eye-view (BEV) cues are rendered as compact text and routed to the teacher alongside the reference answer; a privileged KL, applied only to incorrect trajectories, augments GRPO, and the deployed model remains RGB-only. On the 4B backbone, GPD achieves 57.1 on VSI-Bench and 37.6 average across MindCube, SPARBench, MMSI-Bench, and ViewSpatial, outperforming both GRPO and answer-privileged OPSD across spatial reasoning benchmarks. Ablations confirm the complementarity of 3D and answer privilege, the advantage of question-conditioned routing over full-context injection, and the benefit of restricting distillation to incorrect trajectories.

Alignment tuning is meant to make harmful-request refusal robust, yet this safety behavior can be erased by a small set of benign fine-tuning examples. This is a deployment risk for open-weight models because a checkpoint can pass refusal tests at release time and later lose refusal under low-cost downstream fine-tuning. Prior work has established these refusal failures, but existing studies do not show how to detect this fragility in the aligned model itself before an attack or fine-tuning intervention is run. We introduce Skin-Deep, a geometric diagnostic that detects alignment fragility directly from the aligned model's hidden-state activations before such an intervention is run and compresses the layer-wise safety geometry into a single scalar, the Geometric Fragility Score (GFS). Applied to twenty-one instruction-tuned models spanning six alignment recipes and 3B--32B parameters, Skin-Deep reveals a recurring low-rank safety subspace across model families. Direction ablations show that removing directions in this subspace weakens harmful-request refusal, providing causal evidence that the recovered geometry underlies refusal behavior. Crucially, GFS identifies, before any fine-tuning, the initially safe model that retains the most refusal after small-scale LoRA fine-tuning. These results establish GFS as a practical pre-deployment diagnostic for flagging fragile refusal behavior without running an attack.

Vision-language models (VLM) excel at general understanding yet remain weak at dynamic spatial reasoning (DSR), i.e., reasoning about the evolvement of object geometry and relationship in 3D space over time, largely due to the scarcity of scalable 4D-aware training resources. To bridge this gap across aspects of dataset, benchmark and model, we introduce DSR Suite. First, we propose an automated pipeline that generates multiple-choice question-answer pairs from in-the-wild videos for DSR. By leveraging modern vision foundation models, the pipeline extracts rich geometric and motion information, including camera poses, local point clouds, object masks, orientations, and 3D trajectories. These geometric cues enable the construction of DSR-Train for learning and further human-refined DSR-Bench for evaluation. Compared with previous works, our data emphasize (i) in-the-wild video sources, (ii) object- and scene-level 3D requirements, (iii) viewpoint transformations, (iv) multi-object interactions, and (v) fine-grained, procedural answers. Beyond data, we propose a lightweight Geometry Selection Module (GSM) to seamlessly integrate geometric priors into VLMs, which condenses question semantics and extracts question-relevant knowledge from pretrained 4D reconstruction priors into a compact set of geometry tokens. This targeted extraction avoids overwhelming the model with irrelevant knowledge. Experiments show that integrating DSR-Train and GSM into Qwen2.5-VL-7B significantly enhances its dynamic spatial reasoning capability, while maintaining accuracy on general video understanding benchmarks.

Generalization, the ability to perform well beyond the training context, is a hallmark of biological and artificial intelligence, yet anticipating unseen failures remains a central challenge. Conventional approaches often take a ``bottom-up'' mechanistic route by reverse-engineering interpretable features or circuits to build explanatory models. While insightful, these methods often struggle to provide the high-level, predictive signals for anticipating failure in real-world deployment. Here, we propose using a ``top-down'' approach to studying generalization failures inspired by medical biomarkers: identifying system-level measurements that serve as robust indicators of a model's future performance. Rather than mapping out detailed internal mechanisms, we systematically design and test network markers to probe structure, function links, identify prognostic indicators, and validate predictions in real-world settings. In image classification, we find that task-relevant geometric properties of in-distribution (ID) object manifolds consistently forecast poor out-of-distribution (OOD) generalization. In particular, reductions in two geometric measures, effective manifold dimensionality and utility, predict weaker OOD performance across diverse architectures, optimizers, and datasets. We apply this finding to transfer learning with ImageNet-pretrained models. We consistently find that the same geometric patterns predict OOD transfer performance more reliably than ID accuracy. This work demonstrates that representational geometry can expose hidden vulnerabilities, offering more robust guidance for model selection and AI interpretability.

Empowered by large-scale training, vision-language models (VLMs) achieve strong image and video understanding, yet their ability to perform spatial reasoning in both static scenes and dynamic videos remains limited. Recent advances try to handle this limitation by injecting geometry tokens from pretrained 3D foundation models into VLMs. Nevertheless, we observe that naive token fusion followed by standard fine-tuning in this line of work often leaves such geometric cues underutilized for spatial reasoning, as VLMs tend to rely heavily on 2D visual cues. In this paper, we propose GeoSR, a framework designed to make geometry matter by encouraging VLMs to actively reason with geometry tokens. GeoSR introduces two key components: (1) Geometry-Unleashing Masking, which strategically masks portions of 2D vision tokens during training to weaken non-geometric shortcuts and force the model to consult geometry tokens for spatial reasoning; and (2) Geometry-Guided Fusion, a gated routing mechanism that adaptively amplifies geometry token contributions in regions where geometric evidence is critical. Together, these designs unleash the potential of geometry tokens for spatial reasoning tasks. Extensive experiments on both static and dynamic spatial reasoning benchmarks demonstrate that GeoSR consistently outperforms prior methods and establishes new state-of-the-art performance by effectively leveraging geometric information. The project page is available at https://suhzhang.github.io/GeoSR/.

Large language models learn similar behaviours, yet it remains unclear what structure they share or how to change one behaviour without disturbing others. The Fisher-Rao geometry of next-token probabilities connects these questions: behaviour determines this geometry up to output-preserving symmetries, whereas activation geometry depends on coordinates. Across transformer, state-space and recurrent models, output geometries agree more strongly than activation geometries, and shared geometry supports semantic-category transfer. Agreement with human word choices increases with predictive accuracy, scale and training, and improves further after model-only calibration. Token probabilities and read-out geometry jointly predict the spectrum and its effective dimension. Controlled language assignments show that geometry follows the language law across architectures. Pretraining corpus statistics predict held-out fact acquisition without recalibration, while randomised experiments show that deeper evidence substantially delays acquisition across every tested architecture and evidence construction. Finally, the geometry prescribes minimum-disturbance local interventions, predicts their relative cost, and supports reusable control: updates learned on donor prompts transfer to unseen prompts while better preserving behaviour on reference prompts than Euclidean control. The same geometric correction improves steering, editing, attribution, dictionary learning and fine-tuning.

We use tools from geometric statistics to analyze the usual estimation procedure of a template shape. This applies to shapes from landmarks, curves, surfaces, images etc. We demonstrate the asymptotic bias of the template shape estimation using the stratified geometry of the shape space. We give a Taylor expansion of the bias with respect to a parameter sigma describing the measurement error on the data. We propose two bootstrap procedures that quantify the bias and correct it, if needed. They are applicable for any type of shape data. We give a rule of thumb to provide intuition on whether the bias has to be corrected. This exhibits the parameters that control the bias' magnitude. We illustrate our results on simulated and real shape data.

Linear probing and activation steering use linear directions to predict and control behavior-level concepts such as correctness, safety, and social bias in question answering. We call these behavior-level concept directions. Drawing on the Linear Representation Hypothesis (LRH) and circuit studies, these directions are often interpreted as concept representations. Yet controlled evidence for linear concept structure and local mechanisms does not establish that these directions represent the intended behavioral concepts, leaving probing and steering without a unified theoretical account. We propose the Answer-Basin Representation Hypothesis (ABRH): the model's own answer measure organizes the linear structure of these directions. For each question, all continuations yielding the same answer form an answer basin, whose mass is their total probability; these masses define the model's answer distribution. ABRH posits that its concentration before generation and the relative mass of each answer after generation are represented along linear directions shared across questions. Experiments span four Qwen2.5 and Gemma-3 models on correctness, social bias, and safety tasks. Decoupling concept labels from basin mass shows that probing and steering exhibit concept-consistent effects when labels align with mass orderings, weaken as mass gaps shrink, and reverse under conflict. Probes trained solely on mass orderings among wrong answers still select correct answers; a fixed steering vector can instead favor wrong answers when labels conflict with mass orderings. These results support an answer-measure account of behavior-level concept directions and of when probing and steering succeed, fail, or reverse.

Understanding spatial relations is essential for intelligent agents to act and communicate in the physical world. Relative directions are spatial relations that describe the relative positions of target objects with regard to the intrinsic orientation of reference objects. Grounding relative directions is more difficult than grounding absolute directions because it not only requires a model to detect objects in the image and to identify spatial relation based on this information, but it also needs to recognize the orientation of objects and integrate this information into the reasoning process. We investigate the challenging problem of grounding relative directions with end-to-end neural networks. To this end, we provide GRiD-3D, a novel dataset that features relative directions and complements existing visual question answering (VQA) datasets, such as CLEVR, that involve only absolute directions. We also provide baselines for the dataset with two established end-to-end VQA models. Experimental evaluations show that answering questions on relative directions is feasible when questions in the dataset simulate the necessary subtasks for grounding relative directions. We discover that those subtasks are learned in an order that reflects the steps of an intuitive pipeline for processing relative directions.

We present a method for 3D reconstruction only using calibrated multi-view surface azimuth maps. Our method, multi-view azimuth stereo, is effective for textureless or specular surfaces, which are difficult for conventional multi-view stereo methods. We introduce the concept of tangent space consistency: Multi-view azimuth observations of a surface point should be lifted to the same tangent space. Leveraging this consistency, we recover the shape by optimizing a neural implicit surface representation. Our method harnesses the robust azimuth estimation capabilities of photometric stereo methods or polarization imaging while bypassing potentially complex zenith angle estimation. Experiments using azimuth maps from various sources validate the accurate shape recovery with our method, even without zenith angles.

Large Language Models (LLMs) rely on safety alignment to produce socially acceptable responses. This is typically achieved through instruction tuning and reinforcement learning from human feedback. However, this alignment is known to be brittle: further fine-tuning, even on benign or lightly contaminated data, can degrade safety and reintroduce harmful behaviors. A growing body of work suggests that alignment may correspond to identifiable geometric directions in weight space, forming subspaces that could, in principle, be isolated or preserved to defend against misalignment. In this work, we conduct a comprehensive empirical study of this geometric perspective. We examine whether safety-relevant behavior is concentrated in specific subspaces, whether it can be separated from general-purpose learning, and whether harmfulness arises from distinguishable patterns in internal representations. Across both parameter and activation space, our findings are consistent: subspaces that amplify safe behaviors also amplify unsafe ones, and prompts with different safety implications activate overlapping representations. We find no evidence of a subspace that selectively governs safety. These results challenge the assumption that alignment is geometrically localized. Rather than residing in distinct directions, safety appears to emerge from entangled, high-impact components of the model's broader learning dynamics. This suggests that subspace-based defenses may face fundamental limitations and underscores the need for alternative strategies to preserve alignment under continued training. We corroborate these findings through multiple experiments on five open-source LLMs. Our code is publicly available at: https://github.com/CERT-Lab/safety-subspaces.

Single-cell snapshot data can resolve a continuum of cellular states but do not uniquely determine the dynamics governing transitions between them. However, additional dynamical information can often be encoded in a cell-cell Markov transition kernel. Existing generative approaches for single cell trajectory inference either infer transport only from population marginals, impose a symmetric geometry on the state space, or incorporate directionality through a single velocity vector at each observed state. We introduce Finsler Flow Matching (FFM), a framework for learning continuous stochastic dynamics from discrete Markov transition graphs. We use the first and second local moments to construct a Finsler structure motivated by the Freidlin--Wentzell action, where the second moment determines anisotropic accessibility and the first moment introduces a preferred direction of motion. We learn neural approximations of the resulting directed geodesics, use their Finsler cost to construct source-target couplings, and define geometry-aware stochastic conditional paths that can be distilled into a continuous generative process through simulation-free score and flow matching. Across synthetic and single-cell trajectory inference benchmarks, FFM improves recovery of withheld intermediate populations, particularly when the transition dynamics are strongly directional or anisotropic. Our results provide a principled route from discrete transition probabilities to continuous generative dynamics while retaining both directional and diffusive structure.

While multimodal reasoning has advanced rapidly, solving complex geometry problems critically hinges on active visual assistance, such as constructing auxiliary lines, spurring the rise of Visual Chain-of-Thought (VCoT). However, existing evaluations typically assess visual generation quality and final answer accuracy in isolation, failing to examine whether intermediate visual aids are geometrically valid, effectively utilized in subsequent reasoning, or causally responsible for task success. To bridge this gap, we introduce GeoVAD-Bench, a diagnostic benchmark that pairs a fine-grained five-dimensional trajectory diagnosis covering perception, auxiliary quality, utilization, deductive reasoning, and final correctness with controlled No-Aux, Auto-Aux, and GT-Aux intervention settings to systematically isolate intermediate error modes, the causal gains of visual aids, and the resulting autonomy gap. Our findings reveal that while high-quality auxiliary aids offer substantial theoretical gains for geometric problem solving, autonomous generation is frequently hampered by compounding errors across geometric perception, faithful visual manipulation, visual-state grounding, and deductive reasoning. Guided by these diagnostic insights, we establish a specialized data construction pipeline encompassing geometric perception, diagram editing, and interleaved visual-textual reasoning trajectories, and develop a progressive SFT and multimodal RL training framework. The resulting model, GeoWeave-8B, outperforms the base model by +25.3% in final geometric accuracy and achieves a +30.4% gain in process average across the four intermediate diagnostic dimensions.

Geometry problem-solving (GPS), a challenging task requiring both visual comprehension and symbolic reasoning, effectively measures the reasoning capabilities of multimodal large language models (MLLMs). Humans exhibit strong reasoning ability in this task through accurate identification and adaptive application of geometric principles within visual contexts. However, existing benchmarks fail to jointly assess both dimensions of the human-like geometric reasoning mechanism in MLLMs, remaining a critical gap in assessing their ability to tackle GPS. To this end, we introduce GeoSense, the first comprehensive bilingual benchmark designed to systematically evaluate the geometric reasoning abilities of MLLMs through the lens of geometric principles. GeoSense features a five-level hierarchical framework of geometric principles spanning plane and solid geometry, an intricately annotated dataset of 1,789 problems, and an innovative evaluation strategy. Through extensive experiments on GeoSense with various open-source and closed-source MLLMs, we observe that Gemini-2.0-pro-flash performs best, achieving an overall score of 65.3. Our in-depth analysis reveals that the identification and application of geometric principles remain a bottleneck for leading MLLMs, jointly hindering their reasoning abilities. These findings underscore GeoSense's potential to guide future advancements in MLLMs' geometric reasoning capabilities, paving the way for more robust and human-like reasoning in artificial intelligence.

The aerodynamic coefficients of aircrafts are significantly impacted by its geometry, especially when the angle of attack (AoA) is large. In the field of aerodynamics, traditional polynomial-based parameterization uses as few parameters as possible to describe the geometry of an airfoil. However, because the 3D geometry of a wing is more complicated than the 2D airfoil, polynomial-based parameterizations have difficulty in accurately representing the entire shape of a wing in 3D space. Existing deep learning-based methods can extract massive latent neural representations for the shape of 2D airfoils or 2D slices of wings. Recent studies highlight that directly taking geometric features as inputs to the neural networks can improve the accuracy of predicted aerodynamic coefficients. Motivated by geometry theory, we propose to incorporate Riemannian geometric features for learning Coefficient of Pressure (CP) distributions on wing surfaces. Our method calculates geometric features (Riemannian metric, connection, and curvature) and further inputs the geometric features, coordinates and flight conditions into a deep learning model to predict the CP distribution. Experimental results show that our method, compared to state-of-the-art Deep Attention Network (DAN), reduces the predicted mean square error (MSE) of CP by an average of 8.41% for the DLR-F11 aircraft test set.

Spatial VLMs have made substantial progress in geometric perception, yet complex spatial reasoning requiring multi-step inference over depth, distance, and scene relations remains challenging. Moreover, different spatial queries call for fundamentally different strategies: some are best addressed through purely linguistic, step-by-step deduction, while others require explicit 3D grounding before quantitative inference. We present Dual-Path Spatial Reasoning via Reinforcement Learning for Spatial VLMs (SR-REAL), a unified framework that equips a spatial VLM with two complementary reasoning paths: Language-Only Reasoning (LOR), which performs step-by-step linguistic deduction, and Detect-Then-Reason (DTR), which detects 3D geometric cues (e.g., centers or bounding boxes) via region tokens before explicit geometric inference. SR-REAL begins with a cold-start supervised fine-tuning stage that constructs LOR and DTR chain-of-thought supervision and exposes a region-to-3D interface, followed by RL that optimizes the policy model with accuracy and format rewards; for DTR, a discrete center-based detection reward further refines geometric alignment. Across diverse spatial benchmarks, SR-REAL significantly outperforms spatial VLM baselines: (i) a single RL-trained model supports both reasoning paths, with DTR excelling in region-aware tasks through precise 3D localization and LOR enhancing general spatial reasoning; (ii) jointly training both paths fosters mutual reinforcement; (iii) high-quality, blended cold-start data is crucial for stable RL optimization; and (iv) the model generalizes across datasets and domains without per-task tuning, demonstrating positive transfer between LOR and DTR.

Generative models have shown great promise in generating 3D geometric systems, which is a fundamental problem in many natural science domains such as molecule and protein design. However, existing approaches only operate on static structures, neglecting the fact that physical systems are always dynamic in nature. In this work, we propose geometric trajectory diffusion models (GeoTDM), the first diffusion model for modeling the temporal distribution of 3D geometric trajectories. Modeling such distribution is challenging as it requires capturing both the complex spatial interactions with physical symmetries and temporal correspondence encapsulated in the dynamics. We theoretically justify that diffusion models with equivariant temporal kernels can lead to density with desired symmetry, and develop a novel transition kernel leveraging SE(3)-equivariant spatial convolution and temporal attention. Furthermore, to induce an expressive trajectory distribution for conditional generation, we introduce a generalized learnable geometric prior into the forward diffusion process to enhance temporal conditioning. We conduct extensive experiments on both unconditional and conditional generation in various scenarios, including physical simulation, molecular dynamics, and pedestrian motion. Empirical results on a wide suite of metrics demonstrate that GeoTDM can generate realistic geometric trajectories with significantly higher quality.

How strongly do the remaining diffusion-sampling steps amplify a perturbation at a late latent state? Standard measurements answer this question with newly sampled isotropic noise, even though perturbations encountered during sampling have already been transformed by earlier steps. We compare these two cases directly. For each trajectory, we transport a centered perturbation from an earlier step to a late state, then replay its direction at the same magnitude as a newly sampled isotropic perturbation; both then undergo the same remaining updates. Across the samplers we study, median paired shaped-to-fresh angular-gain ratios range from 1.14 to 2.35. Shaped angular gain exceeds its matched fresh counterpart in every trajectory in the original main cohorts. The same pattern appears when endpoint change is measured by latent RMS. The effect also appears in perceptual feature representations: earlier-sampling directions cause larger feature changes at the endpoint, even when the corresponding pixel-space change is comparable. Permuting shaped directions across trajectories weakens the effect, including within class, indicating that the advantage depends on alignment with the receiving trajectory as well as on shared directional structure.

We present a class of novel optimisers for training neural networks that makes use of the Riemannian metric naturally induced when the loss landscape is embedded in higher-dimensional space. This is the same metric that underlies common visualisations of loss landscapes. By taking this geometric perspective literally and using the induced metric, we develop a new optimiser and compare it to existing methods, namely: SGD, Adam, AdamW, and Muon, across a range of tasks and architectures. Empirically, we conclude that this new class of optimisers is highly effective in low dimensional examples, and provides slight improvement over state-of-the-art methods for training neural networks. These new optimisers have theoretically desirable properties. In particular, the effective learning rate is automatically decreased in regions of high curvature acting as a smoothed out form of gradient clipping. Similarly, one variant of these optimisers can also be viewed as inducing an effective scheduled learning rate and decoupled weight decay is the natural choice from our geometric perspective. The basic method can be used to modify any existing preconditioning method. The new optimiser has a computational complexity comparable to that of Adam.

Generative video models are increasingly studied as implicit world models, yet evaluating whether they produce physically plausible 3D structure and motion remains challenging. Most existing video evaluation pipelines rely heavily on human judgment or learned graders, which can be subjective and weakly diagnostic for geometric failures. We introduce PDI-Bench (Perspective Distortion Index), a quantitative framework for auditing geometric coherence in generated videos. Given a generated clip, we obtain object-centric observations via segmentation and point tracking (e.g., SAM 2, MegaSaM, and CoTracker3), lift them to 3D world-space coordinates via monocular reconstruction, and compute a set of projective-geometry residuals capturing three failure dimensions: scale-depth alignment, 3D motion consistency, and 3D structural rigidity. To support systematic evaluation, we build PDI-Dataset, covering diverse scenarios designed to stress these geometric constraints. Across state-of-the-art video generators, PDI reveals consistent geometry-specific failure modes that are not captured by common perceptual metrics, and provides a diagnostic signal for progress toward physically grounded video generation and physical world model. Our code and dataset can be found at https://pdi-bench.github.io/.

When a language model is fed a wrong answer, what happens inside the network? Current understanding treats truthfulness as a static property of individual-layer representations-a direction to be probed, a feature to be extracted. Less is known about the dynamics: how internal representations diverge across the full depth of the network when the model processes correct versus incorrect continuations. We introduce forced-completion probing, a method that presents identical queries with known correct and incorrect single-token continuations and tracks five geometric measurements across every layer of four decoder-only models(1.5B-13B parameters). We report three findings. First, correct and incorrect paths diverge through rotation, not rescaling: displacement vectors maintain near-identical magnitudes while their angular separation increases, meaning factual selection is encoded in direction on an approximate hypersphere. Second, the model does not passively fail on incorrect input-it actively suppresses the correct answer, driving internal probability away from the right token. Third, both phenomena are entirely absent below a parameter threshold and emerge at 1.6B, suggesting a phase transition in factual processing capability. These results show that factual constraint processing has a specific geometric character-rotational, not scalar; active, not passive-that is invisible to methods based on single-layer probes or magnitude comparisons.

Multimodal large language models (MLLMs) have made rapid progress in recent years, yet continue to struggle with low-level visual perception (LLVP) -- particularly the ability to accurately describe the geometric details of an image. This capability is crucial for applications in areas such as robotics, medical image analysis, and manufacturing. In this paper, we first introduce Geoperception, a benchmark designed to evaluate an MLLM's ability to accurately transcribe 2D geometric information from an image. Using this benchmark, we demonstrate the limitations of leading MLLMs, and then conduct a comprehensive empirical study to explore strategies for improving their performance on geometric tasks. Our findings highlight the benefits of certain model architectures, training techniques, and data strategies, including the use of high-fidelity synthetic data and multi-stage training with a data curriculum. Notably, we find that a data curriculum enables models to learn challenging geometry understanding tasks which they fail to learn from scratch. Leveraging these insights, we develop Euclid, a family of models specifically optimized for strong low-level geometric perception. Although purely trained on synthetic multimodal data, Euclid shows strong generalization ability to novel geometry shapes. For instance, Euclid outperforms the best closed-source model, Gemini-1.5-Pro, by up to 58.56% on certain Geoperception benchmark tasks and 10.65% on average across all tasks.

We characterise sets of points of exceptional Lie incidence geometries, that is, the natural geometries arising from spherical buildings of exceptional types F_4, E_6, E_7, E_8 and G_2, that form a line using the opposition relation. With that, we obtain a classification of so-called ``geometric lines'' in many of these geometries. Furthermore, our results lead to a characterisation of geometric lines in finite exceptional Lie incidence geometries as minimal blocking sets, that is, point sets of the size of a line admitting no object opposite to all of their members, in most cases, and we classify all exceptions. As a further consequence, we obtain a characterisation of automorphisms of exceptional spherical buildings as certain opposition preserving maps.

Geometric methods for solving open-world off-road navigation tasks, by learning occupancy and metric maps, provide good generalization but can be brittle in outdoor environments that violate their assumptions (e.g., tall grass). Learning-based methods can directly learn collision-free behavior from raw observations, but are difficult to integrate with standard geometry-based pipelines. This creates an unfortunate conflict -- either use learning and lose out on well-understood geometric navigational components, or do not use it, in favor of extensively hand-tuned geometry-based cost maps. In this work, we reject this dichotomy by designing the learning and non-learning-based components in a way such that they can be effectively combined in a self-supervised manner. Both components contribute to a planning criterion: the learned component contributes predicted traversability as rewards, while the geometric component contributes obstacle cost information. We instantiate and comparatively evaluate our system in both in-distribution and out-of-distribution environments, showing that this approach inherits complementary gains from the learned and geometric components and significantly outperforms either of them. Videos of our results are hosted at https://sites.google.com/view/hybrid-imitative-planning

Does text have an intrinsic curvature? Language is increasingly modeled in curved geometries - hyperbolic spaces for hierarchy, mixed-curvature manifolds for compositional structure - yet a basic scientific question remains unresolved: what does curvature mean for text itself, in a way that is native to language rather than an artifact of the embedding space we choose? We argue that text does indeed have curvature, and show how to detect it, define it, and use it. To this end, we propose Texture, a text-native, word-level discrete curvature signal, and make three contributions. (a) Existence: We provide empirical and theoretical certificates that semantic inference in natural corpora is non-flat, i.e. language has inherent curvature. (b) Definition: We define Texture by reconciling left- and right-context beliefs around a masked word through a Schrodinger bridge, yielding a curvature field that is positive where context focuses meaning and negative where it fans out into competing continuations. (c) Utility: Texture is actionable: it serves as a general-purpose measurement and control primitive enabling geometry without geometric training; we instantiate it on two representative tasks, improving long-context inference through curvature-guided compression and retrieval-augmented generation through curvature-guided routing. Together, our results establish a text-native curvature paradigm, making curvature measurable and practically useful.

This paper aims to develop an accurate 3D geometry representation of satellite images using satellite-ground image pairs. Our focus is on the challenging problem of 3D-aware ground-views synthesis from a satellite image. We draw inspiration from the density field representation used in volumetric neural rendering and propose a new approach, called Sat2Density. Our method utilizes the properties of ground-view panoramas for the sky and non-sky regions to learn faithful density fields of 3D scenes in a geometric perspective. Unlike other methods that require extra depth information during training, our Sat2Density can automatically learn accurate and faithful 3D geometry via density representation without depth supervision. This advancement significantly improves the ground-view panorama synthesis task. Additionally, our study provides a new geometric perspective to understand the relationship between satellite and ground-view images in 3D space.

Geometry is a fundamental branch of mathematics and plays a crucial role in evaluating the reasoning capabilities of multimodal large language models (MLLMs). However, existing multimodal mathematics benchmarks mainly focus on plane geometry and largely ignore solid geometry, which requires spatial reasoning and is more challenging than plane geometry. To address this critical gap, we introduce SolidGeo, the first large-scale benchmark specifically designed to evaluate the performance of MLLMs on mathematical reasoning tasks in solid geometry. SolidGeo consists of 3,113 real-world K-12 and competition-level problems, each paired with visual context and annotated with difficulty levels and fine-grained solid geometry categories. Our benchmark covers a wide range of 3D reasoning subjects such as projection, unfolding, spatial measurement, and spatial vector, offering a rigorous testbed for assessing solid geometry. Through extensive experiments, we observe that MLLMs encounter substantial challenges in solid geometry math tasks, with a considerable performance gap relative to human capabilities on SolidGeo. Moreover, we analyze the performance, inference efficiency and error patterns of various models, offering insights into the solid geometric mathematical reasoning capabilities of MLLMs. We hope SolidGeo serves as a catalyst for advancing MLLMs toward deeper geometric reasoning and spatial intelligence.

Much of the success of deep learning is drawn from building architectures that properly respect underlying symmetry and structure in the data on which they operate - a set of considerations that have been united under the banner of geometric deep learning. Often problems in the physical sciences deal with relatively small sets of points in two- or three-dimensional space wherein translation, rotation, and permutation equivariance are important or even vital for models to be useful in practice. In this work, we present rotation- and permutation-equivariant architectures for deep learning on these small point clouds, composed of a set of products of terms from the geometric algebra and reductions over those products using an attention mechanism. The geometric algebra provides valuable mathematical structure by which to combine vector, scalar, and other types of geometric inputs in a systematic way to account for rotation invariance or covariance, while attention yields a powerful way to impose permutation equivariance. We demonstrate the usefulness of these architectures by training models to solve sample problems relevant to physics, chemistry, and biology.

We present a survey of the many and various elements of the modern higher-dimensional theory of quasiconformal mappings and their wide and varied application. It is unified (and limited) by the theme of the author's interests. Thus we will discuss the basic theory as it developed in the 1960s in the early work of F.W. Gehring and Yu G. Reshetnyak and subsequently explore the connections with geometric function theory, nonlinear partial differential equations, differential and geometric topology and dynamics as they ensued over the following decades. We give few proofs as we try to outline the major results of the area and current research themes. We do not strive to present these results in maximal generality, as to achieve this considerable technical knowledge would be necessary of the reader. We have tried to give a feel of where the area is, what are the central ideas and problems and where are the major current interactions with researchers in other areas. We have also added a bit of history here and there. We have not been able to cover the many recent advances generalising the theory to mappings of finite distortion and to degenerate elliptic Beltrami systems which connects the theory closely with the calculus of variations and nonlinear elasticity, nonlinear Hodge theory and related areas, although the reader may see shadows of this aspect in parts.

Geometric spatial reasoning forms the foundation of many applications in artificial intelligence, yet the ability of large language models (LLMs) to operate over geometric spatial information expressed in procedural code remains underexplored. In this paper, we address this gap by formalizing the Program-to-Geometry task, which challenges models to translate programmatic drawing code into accurate and abstract geometric reasoning. To evaluate this capability, we present GeoGramBench, a benchmark of 500 carefully refined problems organized by a tailored three-level taxonomy that considers geometric complexity rather than traditional mathematical reasoning complexity. Our comprehensive evaluation of 17 frontier LLMs reveals consistent and pronounced deficiencies: even the most advanced models achieve less than 50% accuracy at the highest abstraction level. These results highlight the unique challenges posed by program-driven spatial reasoning and establish GeoGramBench as a valuable resource for advancing research in symbolic-to-spatial geometric reasoning. Project page: https://github.com/LiAuto-DSR/GeoGramBench.

In Marius von Senden's Space and Sight, a newly sighted blind patient describes the experience of a corner as lemon-like, because corners "prick" sight like lemons prick the tongue. Prickliness, here, is a dimension in the feature space of sensory experience, an effect of the perceived on the perceiver that arises where the two interact. In the account of the newly sighted, an effect familiar from one interaction translates to a novel context. Perception serves as the vehicle for generalization, in that an effect shared across different experiences produces a concrete abstraction grounded in those experiences. Cezanne and the post-impressionists, fluent in the language of experience translation, realized that the way to paint a concrete form that best reflected reality was to paint not what they saw, but what it was like to see. We envision a future of creation using AI where what it is like to see is replicable, transferrable, manipulable - part of the artist's palette that is both grounded in a particular context, and generalizable beyond it. An active line of research maps human-interpretable features onto directions in GAN latent space. Supervised and self-supervised approaches that search for anticipated directions or use off-the-shelf classifiers to drive image manipulation in embedding space are limited in the variety of features they can uncover. Unsupervised approaches that discover useful new directions show that the space of perceptually meaningful directions is nowhere close to being fully mapped. As this space is broad and full of creative potential, we want tools for direction discovery that capture the richness and generalizability of human perception. Our approach puts creators in the discovery loop during real-time tool use, in order to identify directions that are perceptually meaningful to them, and generate interpretable image translations along those directions.

3D learning systems implicitly assume that objects occupy a coherent reference frame. Nonetheless, in practice, every asset arrives with an arbitrary global rotation, and models are left to resolve directional ambiguity on their own. This persistent misalignment suppresses pose-consistent generation, and blocks the emergence of stable directional semantics. To address this issue, we construct , a massive canonical 3D dataset of 320K objects over 1,156 categories -- an order-of-magnitude increase over prior work. At this scale, directional semantics become statistically learnable: Canoverse improves 3D generation stability, enables precise cross-modal 3D shape retrieval, and unlocks zero-shot point-cloud orientation estimation even for out-of-distribution data. This is achieved by a new canonicalization framework that reduces alignment from minutes to seconds per object via compact hypothesis generation and lightweight human discrimination, transforming canonicalization from manual curation into a high-throughput data generation pipeline. The Canoverse dataset will be publicly released upon acceptance. Project page: https://github.com/123321456-gif/Canoverse

Reconstructing 3D representations from 2D inputs is a fundamental task in computer vision and graphics, serving as a cornerstone for understanding and interacting with the physical world. While traditional methods achieve high fidelity, they are limited by slow per-scene optimization or category-specific training, which hinders their practical deployment and scalability. Hence, generalizable feed-forward 3D reconstruction has witnessed rapid development in recent years. By learning a model that maps images directly to 3D representations in a single forward pass, these methods enable efficient reconstruction and robust cross-scene generalization. Our survey is motivated by a critical observation: despite the diverse geometric output representations, ranging from implicit fields to explicit primitives, existing feed-forward approaches share similar high-level architectural patterns, such as image feature extraction backbones, multi-view information fusion mechanisms, and geometry-aware design principles. Consequently, we abstract away from these representation differences and instead focus on model design, proposing a novel taxonomy centered on model design strategies that are agnostic to the output format. Our proposed taxonomy organizes the research directions into five key problems that drive recent research development: feature enhancement, geometry awareness, model efficiency, augmentation strategies and temporal-aware models. To support this taxonomy with empirical grounding and standardized evaluation, we further comprehensively review related benchmarks and datasets, and extensively discuss and categorize real-world applications based on feed-forward 3D models. Finally, we outline future directions to address open challenges such as scalability, evaluation standards, and world modeling.

Accurately drawing non-planar 3D curves in immersive Virtual Reality (VR) is indispensable for many precise 3D tasks. However, due to lack of physical support, limited depth perception, and the non-planar nature of 3D curves, it is challenging to adjust mid-air strokes to achieve high precision. Instead of creating new interaction techniques, we investigated how task geometric shapes and input modalities affect precision-first drawing performance in a within-subject study (n = 12) focusing on 3D target tracing in commercially available VR headsets. We found that compared to using bare hands, VR controllers and pens yield nearly 30% of precision gain, and that the tasks with large curvature, forward-backward or left-right orientations perform best. We finally discuss opportunities for designing novel interaction techniques for precise 3D drawing. We believe that our work will benefit future research aiming to create usable toolboxes for precise 3D drawing.

Cross-entropy pretraining and preference alignment update the same transformer weights, but leave geometrically distinct traces. We characterise this asymmetry with a relative-subspace-fraction probe that tracks how weight deltas align with residual-stream activation subspaces and with the prediction subspace defined by the unembedding. Alignment deltas concentrate in the read pathway (W_Q, W_K), along principal directions of attention-input activations, while remaining near-isotropic in the write pathway (W_O, W_2) relative to the prediction subspace. We explain this pattern through anisotropic gradient accumulation: updates to a matrix W are sums of outer products δ_t a_t^top, and inherit directional structure from whichever side has concentrated covariance. For read-pathway matrices, this side is the input activation a_t, whose covariance is spiked in trained transformers and therefore produces objective-agnostic concentration. For write-pathway matrices, the relevant side is the upstream gradient δ_t, whose anisotropy depends on the loss. Cross-entropy supplies the canonical sharp per-sample signal, inducing write-pathway prediction geometry during pretraining; alignment objectives typically add little further write-side concentration. We support this explanation with a within-checkpoint trajectory, a graded contrastive-objective control, and a closed-form rank-1 intervention with matched direction controls, providing causal evidence for the proposed weight-space geometry.

Across scientific domains, empirical data often give rise to positive semidefinite matrices that encode similarities, couplings or interactions and induce natural geometries. We investigate whether changing the geometry used to compare the same empirical representations preserves subject-level performance and the local structures from which explanations are derived, a question we term the prediction explanation invariance problem. We address this problem across morphometric MRI, fMRI and EEG data by comparing Frobenius and trace geometries applied to the same empirical matrices. Predictive performance was broadly preserved across geometries, but comparable performance did not imply agreement in subject-level decision scores or predicted labels. Predictive similarity also masked geometry-dependent differences in local neighbourhoods, perturbation sensitivities and explanatory rankings. Dimensionality reduction made the two subject-space geometries progressively more concordant, while classification performance and decision-level agreement declined. These results identify data geometry as a hidden degree of freedom in explainability: similar performance does not guarantee invariant decisions or explanations.

We present a novel geometric perspective on the latent space of diffusion models. We first show that the standard pullback approach, utilizing the deterministic probability flow ODE decoder, is fundamentally flawed. It provably forces geodesics to decode as straight segments in data space, effectively ignoring any intrinsic data geometry beyond the ambient Euclidean space. Complementing this view, diffusion also admits a stochastic decoder via the reverse SDE, which enables an information geometric treatment with the Fisher-Rao metric. However, a choice of x_T as the latent representation collapses this metric due to memorylessness. We address this by introducing a latent spacetime z=(x_t,t) that indexes the family of denoising distributions p(x_0 | x_t) across all noise scales, yielding a nontrivial geometric structure. We prove these distributions form an exponential family and derive simulation-free estimators for curve lengths, enabling efficient geodesic computation. The resulting structure induces a principled Diffusion Edit Distance, where geodesics trace minimal sequences of noise and denoise edits between data. We also demonstrate benefits for transition path sampling in molecular systems, including constrained variants such as low-variance transitions and region avoidance. Code is available at: https://github.com/rafalkarczewski/spacetime-geometry.

We introduce Equivariant Neural Eikonal Solvers, a novel framework that integrates Equivariant Neural Fields (ENFs) with Neural Eikonal Solvers. Our approach employs a single neural field where a unified shared backbone is conditioned on signal-specific latent variables - represented as point clouds in a Lie group - to model diverse Eikonal solutions. The ENF integration ensures equivariant mapping from these latent representations to the solution field, delivering three key benefits: enhanced representation efficiency through weight-sharing, robust geometric grounding, and solution steerability. This steerability allows transformations applied to the latent point cloud to induce predictable, geometrically meaningful modifications in the resulting Eikonal solution. By coupling these steerable representations with Physics-Informed Neural Networks (PINNs), our framework accurately models Eikonal travel-time solutions while generalizing to arbitrary Riemannian manifolds with regular group actions. This includes homogeneous spaces such as Euclidean, position-orientation, spherical, and hyperbolic manifolds. We validate our approach through applications in seismic travel-time modeling of 2D, 3D, and spherical benchmark datasets. Experimental results demonstrate superior performance, scalability, adaptability, and user controllability compared to existing Neural Operator-based Eikonal solver methods.

Videos inherently represent 2D projections of a dynamic 3D world. However, our analysis suggests that video diffusion models trained solely on raw video data often fail to capture meaningful geometric-aware structure in their learned representations. To bridge this gap between video diffusion models and the underlying 3D nature of the physical world, we propose Geometry Forcing, a simple yet effective method that encourages video diffusion models to internalize latent 3D representations. Our key insight is to guide the model's intermediate representations toward geometry-aware structure by aligning them with features from a pretrained geometric foundation model. To this end, we introduce two complementary alignment objectives: Angular Alignment, which enforces directional consistency via cosine similarity, and Scale Alignment, which preserves scale-related information by regressing unnormalized geometric features from normalized diffusion representation. We evaluate Geometry Forcing on both camera view-conditioned and action-conditioned video generation tasks. Experimental results demonstrate that our method substantially improves visual quality and 3D consistency over the baseline methods. Project page: https://GeometryForcing.github.io.

Deciding whether to call a tool is a core competence of an LLM agent, and a costly one to get wrong: needless calls add latency, accrue cost, and may trigger irreversible side effects, while missing calls leave the model confidently wrong on questions it could only answer through tool-calls. Models manage this balance poorly, both over-using and under-using tools. Existing methods such as post-training and prompt engineering are expensive and difficult to modify at inference time. We show that whether an instruction-tuned model calls a tool can be controlled by a single linear direction in its residual stream, extracted without any training from the model's own tool-use preference signal and turned into an inference-time intervention with no prompt change. Adding the direction with strength α moves the call rate monotonically from near 0% to over 90% while keeping calls well-formed. The steering works in both directions: dialing it down suppresses calls, and dialing it up induces new calls that land precisely on the questions the model cannot answer from its own knowledge. We also show that the direction generalizes to unseen tools with strength comparable to each tool's own direction and without favoring any specific tool choice. With live tool execution, a single sweep of the steering traces a cost/accuracy Pareto frontier and nearly doubles open-domain QA accuracy (0.29 ! rightarrow ! 0.56); the same recipe transfers across a diverse range of models spanning dense, MoE, and multimodal architectures, without any training. Our code is publicly available at https://github.com/YuqiChen4188/Steering-Tool-Use-Propensity.

Latent reasoning models (LRMs) replace explicit chain-of-thought with continuous thoughts. Recent work treats observable latent-state patterns, such as BFS-like frontiers and decodable arithmetic computation, as evidence for internal reasoning mechanisms. Evaluating two LRMs (Coconut and CODI) against controls lacking the proposed recurrence or curriculum, we find these patterns also appear in the controls and do not always causally affect behavior. Causal interventions reveal that latent-thought utilization is not binary but graded, scaling with a thought's causal effect on model behavior. Geometric analyses reveal this effect concentrates in low-rank directions whose step-to-step geometry grows more structured as their behavioral influence increases. Latent thoughts should therefore be treated as hidden computation, not hidden explanation: decodability, attention, or static structure alone cannot establish mechanism. LRM interpretability thus requires matched controls and causal tests.

Understanding the physical world requires perceptual models grounded in physical laws rather than mere statistical correlations. However, existing multimodal learning frameworks, focused on vision and language, lack physical consistency and overlook the intrinsic causal relationships among an object's geometry, material, vibration modes, and the sounds it produces. We introduce VibraVerse, a large-scale geometry-acoustics alignment dataset that explicitly bridges the causal chain from 3D geometry -> physical attributes -> modal parameters -> acoustic signals. Each 3D model has explicit physical properties (density, Young's modulus, Poisson's ratio) and volumetric geometry, from which modal eigenfrequencies and eigenvectors are computed for impact sound synthesis under controlled excitations. To establish this coherence, we introduce CLASP, a contrastive learning framework for cross-modal alignment that preserves the causal correspondence between an object's physical structure and its acoustic response. This framework enforces physically consistent alignment across modalities, ensuring that every sample is coherent, traceable to the governing equations, and embedded within a unified representation space spanning shape, image, and sound. Built upon VibraVerse, we define a suite of benchmark tasks for geometry-to-sound prediction, sound-guided shape reconstruction, and cross-modal representation learning. Extensive validations on these tasks demonstrate that models trained on VibraVerse exhibit superior accuracy, interpretability, and generalization across modalities. These results establish VibraVerse as a benchmark for physically consistent and causally interpretable multimodal learning, providing a foundation for sound-guided embodied perception and a deeper understanding of the physical world. The dataset will be open-sourced.

Steering is a widely used technique for controlling large language models, yet its effects are often unstable and hard to predict. Existing theoretical accounts are largely based on the Linear Representation Hypothesis (LRH). While LRH assumes that concepts can be orthogonalized for lossless control, this idealized mapping fails in real representations and cannot account for the observed unpredictability of steering. By relaxing LRH's orthogonality assumption while preserving linear representations, we show that overlapping concept contributions naturally yield a sample-specific axis-orthogonal structure. We formalize this as the Cylindrical Representation Hypothesis (CRH). In CRH, a central axis captures the main difference between concept absence and presence and drives concept generation. A surrounding normal plane controls steering sensitivity by determining how easily the axis can activate the target concept. Within this plane, only specific sensitive sectors strongly facilitate concept activation, while other sectors can suppress or delay it. While the surrounding normal plane can be reliably identified from difference vectors, the sensitive sector cannot, introducing intrinsic uncertainty at the sector level. This uncertainty provides a principled explanation for why steering outcomes often fluctuate even when using well-aligned directions. Our experiments verify the existence of the cylindrical structure and demonstrate that CRH provides a valid and practical way to interpret model steering behavior in real settings: https://github.com/mbzuai-nlp/CRH.

Optimization analyses for cross-entropy training rely on local Taylor models of the loss to predict whether a proposed step will decrease the objective. These surrogates are reliable only inside the Taylor convergence radius of the true loss along the update direction. That radius is set not by real-line curvature alone but by the nearest complex singularity. For cross-entropy, the softmax partition function F=sum_j exp(z_j) has complex zeros -- ``ghosts of softmax'' -- that induce logarithmic singularities in the loss and cap this radius. To make this geometry usable, we derive closed-form expressions under logit linearization along the proposed update direction. In the binary case, the exact radius is ρ^*=δ^2+ π^2/Δ_a. In the multiclass case, we obtain the lower bound ρ_a=π/Δ_a, where Δ_a=max_k a_k-min_k a_k is the spread of directional logit derivatives a_k=nabla z_kcdot v. This bound costs one Jacobian-vector product and reveals what makes a step fragile: samples that are both near a decision flip and highly sensitive to the proposed direction tighten the radius. The normalized step size r=τ/ρ_a separates safe from dangerous updates. Across six tested architectures and multiple step directions, no model fails for r<1, yet collapse appears once rge 1. Temperature scaling confirms the mechanism: normalizing by ρ_a shrinks the onset-threshold spread from standard deviation 0.992 to 0.164. A controller that enforces τleρ_a survives learning-rate spikes up to 10{,} 000times in our tests, where gradient clipping still collapses. Together, these results identify a geometric constraint on cross-entropy optimization that operates through Taylor convergence rather than Hessian curvature.

Attention sinks, representation collapse, and norm stratification are treated as transformer-specific pathologies. We show they are not specific to attention: they are what content-based routing does under a fixed similarity metric. We give a reframing identity: softmax attention is Boltzmann-weighted aggregation over Euclidean distances with constant key norms, so its score omits a -|k|^2 term and is blind to key magnitude. This predicts that any router whose metric is ill-matched to its representations should compensate, by concentrating its routing and collapsing the routed representations. We test it on routers that score and aggregate over different axes: softmax attention over tokens (nine pretrained transformers), graph attention over nodes, a selective state-space model and a recurrent mixer over time, and learned residuals over depth. All develop the same signature, and two within-model ablations show it is caused by the routing mechanism rather than by incidental dynamics. The form is contingent, set by the strength of the positional brake each router carries alongside its content score; we sweep that brake and move the onset across its whole range. The mechanism is not contingent, and it does not require norm stratification: a router with norm-normalized keys concentrates just the same. We do not claim these models implement Riemannian geometry; the geometric view is a diagnostic that names the inadequacy of the flat, norm-blind metric.

Previous works that leverage video models for image-to-3D scene generation often suffer from geometric distortions and blurry content. Using video generation models to implicitly maintain geometric consistency according to a single-frame input is ineffective. In this paper, we present a two-stage method, named GeoWorld, that renovates the image-to-3D scene generation pipeline by providing full-frame geometry features. The first-stage video generation model, followed by a multi-view geometry model, produces full-frame geometry features, which are then used as a mental draft of geometric conditions to aid the second-stage video-generation model. A geometric loss is proposed to impose real-world geometric constraints, and a geometry adaptation module is introduced to ensure the effective utilization of geometry features. Thanks to full-frame geometric modeling, the two smaller video models in our two-stage method can generate higher-fidelity 3D scenes than SOTA methods, while being even faster, e.g. 7.5times faster than Hunyuan-Voyager. Project page: https://peaes.github.io/GeoWorld.

Camera redirection aims to replay a dynamic scene from a single monocular video under a user-specified camera trajectory. However, large-angle redirection is inherently ill-posed: a monocular video captures only a narrow spatio-temporal view of a dynamic 3D scene, providing highly partial observations of the underlying 4D world. The key challenge is therefore to recover a complete and coherent representation from this limited input, with consistent geometry and motion. While recent diffusion-based methods achieve impressive results, they often break down under large-angle viewpoint changes far from the original trajectory, where missing visual grounding leads to severe geometric ambiguity and temporal inconsistency. To address this, we present FreeOrbit4D, an effective training-free framework that tackles this geometric ambiguity by recovering a geometry-complete 4D proxy as structural grounding for video generation. We obtain this proxy by decoupling foreground and background reconstructions: we unproject the monocular video into a static background and geometry-incomplete foreground point clouds in a unified global space, then leverage an object-centric multi-view diffusion model to synthesize multi-view images and reconstruct geometry-complete foreground point clouds in canonical object space. By aligning the canonical foreground point cloud to the global scene space via dense pixel-synchronized 3D--3D correspondences and projecting the geometry-complete 4D proxy onto target camera viewpoints, we provide geometric scaffolds that guide a conditional video diffusion model. Extensive experiments show that FreeOrbit4D produces more faithful redirected videos under challenging large-angle trajectories, and our geometry-complete 4D proxy further opens a potential avenue for practical applications such as edit propagation and 4D data generation. Project page and code will be released soon.

Spatial intelligence is a critical component of embodied AI, promoting robots to understand and interact with their environments. While recent advances have enhanced the ability of VLMs to perceive object locations and positional relationships, they still lack the capability to precisely understand object orientations-a key requirement for tasks involving fine-grained manipulations. Addressing this limitation not only requires geometric reasoning but also an expressive and intuitive way to represent orientation. In this context, we propose that natural language offers a more flexible representation space than canonical frames, making it particularly suitable for instruction-following robotic systems. In this paper, we introduce the concept of semantic orientation, which defines object orientations using natural language in a reference-frame-free manner (e.g., the ''plug-in'' direction of a USB or the ''handle'' direction of a knife). To support this, we construct OrienText300K, a large-scale dataset of 3D models annotated with semantic orientations that link geometric understanding to functional semantics. By integrating semantic orientation into a VLM system, we enable robots to generate manipulation actions with both positional and orientational constraints. Extensive experiments in simulation and real world demonstrate that our approach significantly enhances robotic manipulation capabilities, e.g., 48.7% accuracy on Open6DOR and 74.9% accuracy on SIMPLER.

Recent studies suggest that diffusion models can recover geometric structure in the data manifolds they are trained on, yet the supporting evidence has so far come mostly from natural-image data, where the underlying geometry itself is unknown. We study this question in a setting where the geometry is analytically tractable: constrained inverse kinematics (IK). Each task-space constraint defines a configuration-space manifold with known intrinsic dimension, giving direct ground truth for evaluating the geometry learned by the model. For each of the 6-DoF UR5 and 7-DoF Franka, we train a single conditional diffusion model across seven constraint families, spanning solution manifolds from discrete IK branches to self-motion manifolds. Our empirical results reveal that the intrinsic dimension recovered from the model's score function matches the analytical degrees of freedom of the corresponding constraint manifold across both robots. Moreover, linear interpolation in the latent space leads to generated solutions that remain close to the appropriate constraint manifold, indicating that the learned representation further captures geometric structure of the constraint family beyond intrinsic dimension alone. Constrained IK therefore offers a controlled setting for studying the intrinsic geometry learned by diffusion models.

Riemannian geometry has been applied to Brain Computer Interface (BCI) for brain signals classification yielding promising results. Studying electroencephalographic (EEG) signals from their associated covariance matrices allows a mitigation of common sources of variability (electronic, electrical, biological) by constructing a representation which is invariant to these perturbations. While working in Euclidean space with covariance matrices is known to be error-prone, one might take advantage of algorithmic advances in information geometry and matrix manifold to implement methods for Symmetric Positive-Definite (SPD) matrices. This paper proposes a comprehensive review of the actual tools of information geometry and how they could be applied on covariance matrices of EEG. In practice, covariance matrices should be estimated, thus a thorough study of all estimators is conducted on real EEG dataset. As a main contribution, this paper proposes an online implementation of a classifier in the Riemannian space and its subsequent assessment in Steady-State Visually Evoked Potential (SSVEP) experimentations.

Many theoretical results in deep learning can be traced to symmetry or equivariance of neural networks under parameter transformations. However, existing analyses are typically problem-specific and focus on first-order consequences such as conservation laws, while the implications for second-order structure remain less understood. We develop a general equivariance toolbox that yields coupled first- and second-order constraints on learning dynamics. The framework extends classical Noether-type analyses in three directions: from gradient constraints to Hessian constraints, from symmetry to general equivariance, and from continuous to discrete transformations. At the first order, our framework unifies conservation laws and implicit-bias relations as special cases of a single identity. At the second order, it provides structural predictions about curvature: which directions are flat or sharp, how the gradient aligns with Hessian eigenspaces, and how the loss landscape geometry reflects the underlying transformation structure. We illustrate the framework through several applications, recovering known results while also deriving new characterizations that connect transformation structure to modern empirical observations about optimization geometry.

Vision-language pre-trained models (VLPs) are widely used in real-world applications. However, they remain vulnerable to adversarial attacks. Although adversarial detection methods have demonstrated success in single-modality settings (either vision or language), their effectiveness and reliability in multimodal models such as VLPs remain largely unexplored. In this work, we study the geometry of VLP embedding spaces and observe structured anisotropy that differs from unimodal vision models. Our theoretical analysis shows that under this anisotropic structure, adversarial attacks increase the expected geometric separation between clean and adversarial examples (AEs). Specifically, we demonstrate that AEs consistently exhibit greater expected distances to randomly sampled points than their clean counterparts, indicating that AEs tend to push representations out of manifold regions. Building on these insights, we propose GeoDetect, which leverages these off-manifold deviations via geometric scores to identify AEs. Through comprehensive evaluations, we show that our approach reliably detects AEs across diverse VLP architectures and threat settings, covering unimodal and multimodal attacks as well as adaptive attacks, thereby providing a robust and practical approach to improving the safety and reliability of these models.

Large language models (LLMs) have shown remarkable proficiency in human-level reasoning and generation capabilities, which encourages extensive research on their application in mathematical problem solving. However, current work has been largely focused on text-based mathematical problems, with limited investigation in problems involving geometric information. Addressing this gap, we aim to enable LLMs to solve geometric problems by understanding image input. We first analyze the limitations of current Multimodal Large Language Models (MLLMs) in this area: they struggle to accurately comprehending basic geometric elements and their relationships. To overcome these challenges, we take advantage of the unique characteristics of geometric problems (such as unique geometric logical form, and geometric scalability) and the capacity of the textual LLMs to build an enriched multimodal geometry dataset based on existing data. The augmented dataset, Geo170K, contains more than 170K geometric image-caption and question-answer pairs. Utilizing our constructed Geo170K dataset, we develop G-LLaVA, which demonstrates exceptional performance in solving geometric problems, significantly outperforming GPT-4-V on the MathVista benchmark with only 7B parameters.

This paper presents GPSM4K, a comprehensive geometry multimodal dataset tailored to augment the problem-solving capabilities of Large Vision Language Models (LVLMs). GPSM4K encompasses 2157 multimodal question-answer pairs manually extracted from mathematics textbooks spanning grades 7-12 and is further augmented to 5340 problems, consisting of both numerical and theorem-proving questions. In contrast to PGPS9k, Geometry3K, and Geo170K which feature only objective-type questions, GPSM4K offers detailed step-by-step solutions in a consistent format, facilitating a comprehensive evaluation of problem-solving approaches. This dataset serves as an excellent benchmark for assessing the geometric reasoning capabilities of LVLMs. Evaluation of our test set shows that there is scope for improvement needed in open-source language models in geometry problem-solving. Finetuning on our training set increases the geometry problem-solving capabilities of models. Further, We also evaluate the effectiveness of techniques such as image captioning and Retrieval Augmentation generation (RAG) on model performance. We leveraged LLM to automate the task of final answer evaluation by providing ground truth and predicted solutions. This research will help to assess and improve the geometric reasoning capabilities of LVLMs.

Sagnac interferometers are important tools for precision measurements. Cancellation of common-path noise ensures a high degree of stability against external perturbations, while their sensitivity to rotations provides the basis of laser gyroscopes. Here we highlight another, less explored feature of Sagnac interferometers: the fact that optical elements are traversed in reverse order for clockwise and counterclockwise propagating light components. This provides the opportunity to explore a classical realization of indefinite causal order, where the order of events within a sequence is not fixed. We explore this concept to identify the geometric phase associated with two non-commuting polarization operations with a single measurement. This idea may have applications for the rapid determination of polarization manipulations or optical activity within chiral media, but foremost it provides a geometric illustration of indefinite causal order.

Video diffusion models lack explicit geometric supervision during training, leading to inconsistency artifacts such as object deformation, spatial drift, and depth violations in generated videos. To address this limitation, we propose a geometry-based reward model that leverages pretrained geometric foundation models to evaluate multi-view consistency through cross-frame reprojection error. Unlike previous geometric metrics that measure inconsistency in pixel space, where pixel intensity may introduce additional noise, our approach conducts error computation in a pointwise fashion, yielding a more physically grounded and robust error metric. Furthermore, we introduce a geometry-aware sampling strategy that filters out low-texture and non-semantic regions, focusing evaluation on geometrically meaningful areas with reliable correspondences to improve robustness. We apply this reward model to align video diffusion models through two complementary pathways: post-training of a bidirectional model via SFT or Reinforcement Learning and inference-time optimization of a Causal Video Model (e.g., Streaming video generator) via test-time scaling with our reward as a path verifier. Experimental results validate the effectiveness of our design, demonstrating that our geometry-based reward provides superior robustness compared to other variants. By enabling efficient inference-time scaling, our method offers a practical solution for enhancing open-source video models without requiring extensive computational resources for retraining.

What is the geometry of a visual percept? The most widely used protocols for decomposing neural network representations into interpretable parts treat concepts as isolated directions, yet recent work shows that concepts are often realized as geometric structures in low dimensional regions of activation space. We turn to the literature of Structured sparsity to close this gap, and show that block sparsity, which groups directions into blocks, is the prior matched to a generative model in which a representation is a sparse sum of low-dimensional manifolds: the modern, learned form of a classical idea in visual neuroscience, where a visual feature is carried by a coordinated group of neurons rather than a single tuned one. We implement three variants of block-sparse featurizers (BSFs) and, through a minimum-description-length analysis, show that all three describe activations more compactly than direction-based featurizers, with the recovered concepts typically two- to four-dimensional. We then use BSFs to (i) recontextualize prior work, showing that curve detectors in InceptionV1 actually read from a single continuous curve manifold, (ii) discover novel manifolds including shadows and lighting in DINOv3, and (iii) support interpretable control of image generation in diffusion models (SDXL) via manifold steering.

Large Language Models exhibit paradoxical fragility in fundamental arithmetic, implying a disconnect between internal computation and discrete output. By analyzing the residual stream geometry during multi-operand addition, we identify the Iso-Raw-Sum Trajectory (IRST), a geometric structure where representations are anchored by semantic digits and modulated by continuous carry fibers. We propose the Noisy Quantization Model to explain this geometry, framing arithmetic errors as Geometric Slippages caused by internal neural noise pushing a continuous, latent Carry Potential across quantization thresholds. This geometric framework further elucidates Probe Versatility, explaining how lightweight probes can disentangle coexisting latent signals (such as ground truth versus hallucination) from a single activation vector. Finally, we validate these insights through a geometric consistency check method that effectively detects and corrects these quantization failures during inference. Our code is available at https://github.com/RL-MIND/Shape-of-Addition.

Understanding how transformer representations evolve across layers, not merely what they encode, remains an open problem in mechanistic interpretability. We recast the transformer forward pass as a discrete population trajectory through a high-dimensional representation manifold, drawing on geometric tools from computational neuroscience. Rather than probing for pre-specified features, we characterize trajectory geometry using five metrics computed directly in the ambient space: trajectory length, curvature, a semantic convergence index, layerwise cosine similarity, and representational stability. Across three model families (GPT-2, TinyLlama, Qwen2.5) and five controlled prompt families, we report four findings. First, semantically related prompts converge significantly in middle-to-late layers (peak CI 0.41--0.58, p<0.001, Mann-Whitney U), consistent with attractor-like dynamics. Second, reasoning tasks produce trajectories of greater curvature than lexical variations (0.71--0.83 rad vs. 0.27--0.31 rad), suggesting curvature encodes computational complexity. Third, ambiguous tokens exhibit trajectory bifurcation with up to 5.6x representational separation by the final layer, absent in unambiguous controls. Fourth, layerwise cosine similarity reveals a universal three-phase structure: encoding, elaboration, and output preparation, consistent across all three architectures. All four effects vanish under shuffled-layer and random-embedding controls. We release a fully open-source, model-agnostic pipeline and argue that trajectory geometry constitutes a principled, probe-free lens for mechanistic interpretability.

Multimodal large language models (MLLMs) have exhibited remarkable performance in various visual tasks, yet still struggle with spatial reasoning. Recent efforts mitigate this by injecting geometric features from 3D foundation models, but rely on static single-layer extractions. We identify that such an approach induces a task misalignment bias: the geometric features naturally evolve towards 3D pretraining objectives, which may contradict the heterogeneous spatial demands of MLLMs, rendering any single layer fundamentally insufficient. To resolve this, we propose GeoAlign, a novel framework that dynamically aggregates multi-layer geometric features to realign with the actual demands. GeoAlign constructs a hierarchical geometric feature bank and leverages the MLLM's original visual tokens as content-aware queries to perform layer-wise sparse routing, adaptively fetching the suitable geometric features for each patch. Extensive experiments on VSI-Bench, ScanQA, and SQA3D demonstrate that our compact 4B model effectively achieves state-of-the-art performance, even outperforming larger existing MLLMs.

Despite their proficiency in general tasks, Multi-modal Large Language Models (MLLMs) struggle with automatic Geometry Problem Solving (GPS), which demands understanding diagrams, interpreting symbols, and performing complex reasoning. This limitation arises from their pre-training on natural images and texts, along with the lack of automated verification in the problem-solving process. Besides, current geometric specialists are limited by their task-specific designs, making them less effective for broader geometric problems. To this end, we present GeoX, a multi-modal large model focusing on geometric understanding and reasoning tasks. Given the significant differences between geometric diagram-symbol and natural image-text, we introduce unimodal pre-training to develop a diagram encoder and symbol decoder, enhancing the understanding of geometric images and corpora. Furthermore, we introduce geometry-language alignment, an effective pre-training paradigm that bridges the modality gap between unimodal geometric experts. We propose a Generator-And-Sampler Transformer (GS-Former) to generate discriminative queries and eliminate uninformative representations from unevenly distributed geometric signals. Finally, GeoX benefits from visual instruction tuning, empowering it to take geometric images and questions as input and generate verifiable solutions. Experiments show that GeoX outperforms both generalists and geometric specialists on publicly recognized benchmarks, such as GeoQA, UniGeo, Geometry3K, and PGPS9k.

We study a version of adversarial classification where an adversary is empowered to corrupt data inputs up to some distance varepsilon, using tools from variational analysis. In particular, we describe necessary conditions associated with the optimal classifier subject to such an adversary. Using the necessary conditions, we derive a geometric evolution equation which can be used to track the change in classification boundaries as varepsilon varies. This evolution equation may be described as an uncoupled system of differential equations in one dimension, or as a mean curvature type equation in higher dimension. In one dimension, and under mild assumptions on the data distribution, we rigorously prove that one can use the initial value problem starting from varepsilon=0, which is simply the Bayes classifier, in order to solve for the global minimizer of the adversarial problem for small values of varepsilon. In higher dimensions we provide a similar result, albeit conditional to the existence of regular solutions of the initial value problem. In the process of proving our main results we obtain a result of independent interest connecting the original adversarial problem with an optimal transport problem under no assumptions on whether classes are balanced or not. Numerical examples illustrating these ideas are also presented.

Complete orthogonal predictive coordinates do not by themselves bind a latent direction to a named intervention. We present a mathematical and synthetic audit motivated by vascular device-vessel suitcordance. Capacity-matched least-squares predictors were exactly equivalent under complete fixed output transforms, whereas an anchor-only observer recovered interpretations only within the span of known perturbation signatures. Six three-dimensional configurations across 64 seeds gave a maximum paired prediction discrepancy of 6.7e-15 but a median untransported edit error of 1.513. Coordinate transport removed that error. Noisy and weak anchors constrained calibration stability, and changing the representation basis required recalibration or verified transport. Across 256 additional fits in dimensions 3-24, prediction equivalence persisted within 4.0e-15. We then evaluated nine deliberate runnable fault classes across 64 seeds. All 576 faulty executions completed, but each violated at least one reconstruction, prediction, delivered-edit or scope contract; all 320 valid control records passed. Repeating a faulty implementation gave exact self-agreement despite error against the separately computed simulator expectation. For one omitted-direction defect, probe coverage followed its analytic law, and rank-aware abstention protected unsupported interpretations. Scalar-noise experiments exposed both missed weak faults and excessive rejection under narrow relative tolerances. These controls provide an executable separation of prediction, semantic support and scientific acceptance. They are synthetic numerical audits, not clinical validation, neural JEPA-Anything replication, agent learning or patient treatment-effect estimation.

Semantic distillation in radiance fields has spurred significant advances in open-vocabulary robot policies, e.g., in manipulation and navigation, founded on pretrained semantics from large vision models. While prior work has demonstrated the effectiveness of visual-only semantic features (e.g., DINO and CLIP) in Gaussian Splatting and neural radiance fields, the potential benefit of geometry-grounding in distilled fields remains an open question. In principle, visual-geometry features seem very promising for spatial tasks such as pose estimation, prompting the question: Do geometry-grounded semantic features offer an edge in distilled fields? Specifically, we ask three critical questions: First, does spatial-grounding produce higher-fidelity geometry-aware semantic features? We find that image features from geometry-grounded backbones contain finer structural details compared to their counterparts. Secondly, does geometry-grounding improve semantic object localization? We observe no significant difference in this task. Thirdly, does geometry-grounding enable higher-accuracy radiance field inversion? Given the limitations of prior work and their lack of semantics integration, we propose a novel framework SPINE for inverting radiance fields without an initial guess, consisting of two core components: coarse inversion using distilled semantics, and fine inversion using photometric-based optimization. Surprisingly, we find that the pose estimation accuracy decreases with geometry-grounded features. Our results suggest that visual-only features offer greater versatility for a broader range of downstream tasks, although geometry-grounded features contain more geometric detail. Notably, our findings underscore the necessity of future research on effective strategies for geometry-grounding that augment the versatility and performance of pretrained semantic features.

Modelling interactions is critical in learning complex dynamical systems, namely systems of interacting objects with highly non-linear and time-dependent behaviour. A large class of such systems can be formalized as geometric graphs, i.e., graphs with nodes positioned in the Euclidean space given an arbitrarily chosen global coordinate system, for instance vehicles in a traffic scene. Notwithstanding the arbitrary global coordinate system, the governing dynamics of the respective dynamical systems are invariant to rotations and translations, also known as Galilean invariance. As ignoring these invariances leads to worse generalization, in this work we propose local coordinate frames per node-object to induce roto-translation invariance to the geometric graph of the interacting dynamical system. Further, the local coordinate frames allow for a natural definition of anisotropic filtering in graph neural networks. Experiments in traffic scenes, 3D motion capture, and colliding particles demonstrate that the proposed approach comfortably outperforms the recent state-of-the-art.

We introduce Geometric Neural Operators (GNPs) for accounting for geometric contributions in data-driven deep learning of operators. We show how GNPs can be used (i) to estimate geometric properties, such as the metric and curvatures, (ii) to approximate Partial Differential Equations (PDEs) on manifolds, (iii) learn solution maps for Laplace-Beltrami (LB) operators, and (iv) to solve Bayesian inverse problems for identifying manifold shapes. The methods allow for handling geometries of general shape including point-cloud representations. The developed GNPs provide approaches for incorporating the roles of geometry in data-driven learning of operators.

Subspace representation is a fundamental technique in various fields of machine learning. Analyzing a geometrical relationship among multiple subspaces is essential for understanding subspace series' temporal and/or spatial dynamics. This paper proposes the second-order difference subspace, a higher-order extension of the first-order difference subspace between two subspaces that can analyze the geometrical difference between them. As a preliminary for that, we extend the definition of the first-order difference subspace to the more general setting that two subspaces with different dimensions have an intersection. We then define the second-order difference subspace by combining the concept of first-order difference subspace and principal component subspace (Karcher mean) between two subspaces, motivated by the second-order central difference method. We can understand that the first/second-order difference subspaces correspond to the velocity and acceleration of subspace dynamics from the viewpoint of a geodesic on a Grassmann manifold. We demonstrate the validity and naturalness of our second-order difference subspace by showing numerical results on two applications: temporal shape analysis of a 3D object and time series analysis of a biometric signal.

Modeling 3D scene geometry and its evolution over time is essential for autonomous driving and robotics. A common paradigm is to use world models to predict future images or latent representations of the environment and subsequently recover geometry from these predictions. However, this paradigm does not explicitly model geometric structure and typically relies on recursive rollouts to reach longer prediction horizons, leading to error accumulation and increasing computational cost. To address these limitations, we present GeoWM, a geometry world model that directly forecasts future scene geometry at specified future horizons without recursive rollout. The key idea is to leverage a geometry foundation model to transform observed RGB frames into a geometric history, which conditions a flow-matching transformer to predict the scene geometry at a specified future horizon. We further show that a lightweight camera-motion predictor can accurately estimate the future viewpoint, and that projecting the observed geometry into the predicted viewpoint provides an effective geometric prior for future geometry forecasting. Extensive experiments on four datasets spanning urban driving, aerial flight, and dynamic manipulation demonstrate that GeoWM outperforms the evaluated world models in forecasting depth, camera pose, and 3D scene geometry, while substantially reducing inference time at longer horizons.

Image-to-3D models can generate visually compelling 3D assets from a single RGB image, but their geometry is often only loosely constrained by the available observations, limiting their use in applications that require geometric fidelity. In many real-world settings, however, partial geometric observations of the object may be available at test time. We introduce a training-free framework for incorporating such evidence into pretrained image-to-3D generative models without retraining or finetuning. To do this, we guide generation using a ray-consistent observation likelihood defined over the model's occupancy representation, combining surface occupancy and free-space evidence. Applied to SAM 3D and its multi-view extension, our approach substantially improves geometric fidelity across different levels of observability, as well as visual quality. Our results demonstrate that pretrained image-to-3D models can effectively integrate partial geometric observations through explicit test-time guidance, complementing their learned generative priors without modifying the underlying model.

Text-driven inversion of generative models is a core paradigm for manipulating 2D or 3D content, unlocking numerous applications such as text-based editing, style transfer, or inverse problems. However, it relies on the assumption that generative models remain sensitive to natural language prompts. We demonstrate that for state-of-the-art native text-to-3D generative models, this assumption often collapses. We identify a critical failure mode where generation trajectories are drawn into latent ``sink traps'': regions where the model becomes insensitive to prompt modifications. In these regimes, changes to the input text fail to alter internal representations in a way that alters the output geometry. Crucially, we observe that this is not a limitation of the model's geometric expressivity; the same generative models possess the ability to produce a vast diversity of shapes but, as we demonstrate, become insensitive to out-of-distribution text guidance. We investigate this behavior by analyzing the sampling trajectories of the generative model, and find that complex geometries can still be represented and produced by leveraging the model's unconditional generative prior. This leads to a more robust framework for text-based 3D shape editing that bypasses latent sinks by decoupling a model's geometric representation power from its linguistic sensitivity. Our approach addresses the limitations of current 3D pipelines and enables high-fidelity semantic manipulation of out-of-distribution 3D shapes. Project webpage: https://daidedou.sorpi.fr/publication/beyondprompts

A significant gap exists between theory and practice in deep learning. Generalization and approximation error bounds are often derived for simplified models or are too loose to be informative. Many rely on the manifold hypothesis and on geometric regularity such as intrinsic dimension, curvature, and reach. Progress requires insight into data-manifold geometry and suitable benchmarks, yet existing options are polarized: analytic manifolds with known geometry but limited applicability, or real-world datasets where geometry is only coarsely estimable. We introduce a benchmarking framework for studying data geometry. We repurpose and extend dSprites and COIL-20 with additional transformation dimensions and dense, axis-aligned sampling, and pair them with finite-difference estimators that recover curvature, reach, and volume at near-ground-truth accuracy in a regime where general-purpose estimators are unreliable or difficult to deploy. The framework is intended as a controlled testbed, useful as a calibration environment for geometric estimators and a sandbox for probing theoretical assumptions. To illustrate its use, we present two application studies, namely assessing the scaling behavior of the bounds of Genovese et al. and Fefferman et al., and tracking the layer-wise geometry of a β-VAE, highlighting the behavior of current bounds and the value of controlled benchmarks for guiding and validating future theory. A reference implementation is available at https://github.com/koulakis/manifold-microscope.

Existing RGB-based imitation learning approaches typically employ traditional vision encoders such as ResNet or ViT, which lack explicit 3D reasoning capabilities. Recent geometry-grounded vision models, such as VGGT~wang2025vggt, provide robust spatial understanding and are promising candidates to address this limitation. This work investigates the integration of geometry-aware visual representations into robotic manipulation. Our results suggest that incorporating the geometry-aware vision encoder into imitation learning frameworks, including ACT and DP, yields up to 6.5% improvement over standard vision encoders in success rate across single- and bi-manual manipulation tasks in both simulation and real-world settings. Despite these benefits, most geometry-grounded models require high computational cost, limiting their deployment in practical robotic systems. To address this challenge, we propose eVGGT, an efficient geometry-aware encoder distilled from VGGT. eVGGT is nearly 9 times faster and 5 times smaller than VGGT, while preserving strong 3D reasoning capabilities. Code and pretrained models will be released to facilitate further research in geometry-aware robotics.

Geometry foundation models recover camera poses and dense geometry from a set of images with a feed-forward network, but they expect pinhole images. That assumption is inside the backbone too: the positional encoding and the training loss both bind an image position to a direction in space, and both depend on the lens. We condition both on the dense ray field, the unit direction through every pixel, which describes any central camera without a lens type, distortion coefficients or a bound on field of view. Angular coordinates give the rotary encoding the measured ray angle of each patch, evaluated per view, and solid-angle weighting scales the point loss by the area each pixel covers on the sphere, so neither the encoding nor the supervision depends on the lens. Any3R is therefore a feed-forward model that takes any central camera, and is robust to mixing many camera types per scene, with no retraining per lens. On a benchmark of thirteen central cameras across three datasets, where every method reconstructs with its own predicted camera poses, it is the most consistently accurate method. Any3R enables scalable 3D reconstruction from heterogeneous crowdsourced and archival imagery collections sourced across diverse camera types. Project page: https://jingong-chen.github.io/Any3R/

Geometry-aware optimization algorithms, such as Muon, have achieved remarkable success in training deep neural networks (DNNs). These methods leverage the underlying geometry of DNNs by selecting appropriate norms for different layers and updating parameters via norm-constrained linear minimization oracles (LMOs). However, even within a group of layers associated with the same norm, the local curvature can be heterogeneous across layers and vary dynamically over the course of training. For example, recent work shows that sharpness varies substantially across transformer layers and throughout training, yet standard geometry-aware optimizers impose fixed learning rates to layers within the same group, which may be inefficient for DNN training. In this paper, we introduce a noise-adaptive layerwise learning rate scheme on top of geometry-aware optimization algorithms and substantially accelerate DNN training compared to methods that use fixed learning rates within each group. Our method estimates gradient variance in the dual norm induced by the chosen LMO on the fly, and uses it to assign time-varying noise-adaptive layerwise learning rates within each group. We provide a theoretical analysis showing that our algorithm achieves a sharp convergence rate. Empirical results on transformer architectures such as LLaMA and GPT demonstrate that our approach achieves faster convergence than state-of-the-art optimizers.

Sparse autoencoders (SAEs) are widely used to extract interpretable features from neural network representations, often under the implicit assumption that concepts correspond to independent linear directions. However, a growing body of evidence suggests that many concepts are instead organized along low-dimensional manifolds encoding continuous geometric relationships. This raises three basic questions: what does it mean for an SAE to capture a manifold, when do existing SAE architectures do so, and how? We develop a theoretical framework that answers these questions and show that SAEs can capture manifolds in two fundamentally different ways: globally, by allocating a compact group of atoms whose linear span contains the entire manifold, or locally, by distributing it across features that each selectively tile a restricted region of the underlying geometry. Empirically, we find that SAEs suboptimally recover continuous structures, mixing the global subspace and local tiling solutions in a fragmented regime we call dilution. This explains why manifold structure is rarely visible at the level of individual concepts and motivates post-hoc unsupervised discovery methods that search for coherent groups of atoms rather than isolated directions. More broadly, our results suggest that future representation learning methods should treat geometric objects, not just individual directions, as the basic units of interpretability.

We analyse the boundary behaviour of the gradient of the torsion function w_Om in convex domains OmsubsetR^d. We prove that its L^infty-norm is attained at a boundary point and establish the stability of this norm under general (convex) perturbations. For problems of the form $sup{|nabla w_{Om}|_infty: Om subset R^d,open, bounded and convex, G(Om)=m}, where G is either volume or perimeter, we show the existence of maximisers which are C^1-smooth, rotationally symmetric about an axis and contain a (d-1)$- dimensional ball (of estimated size) in their boundary. Other constraints, whether geometric (such as diameter or circumradius) or variational (such as torsion or first Dirichlet eigenvalue), are also briefly discussed, and some of their characteristic behaviours are highlighted.

Image and video generators can produce spatially consistent visual content, but how to use this capability to improve spatial understanding remains underexplored. We study this problem from two perspectives: geometric supervision during training and explicit geometric evidence during inference. To this end, we introduce a unified geometric understanding and generation model (GeoUG) that integrates depth and multi-view generation with spatial understanding. First, we design a multi-scale depth codec that enables metric-depth generation using a pretrained visual autoencoder, and show that joint training yields task-dependent gains in spatial understanding. Second, we introduce 3DCueBench to control geometric difficulty while balancing selected 2D cues, and find that generated depth provides larger reasoning gains on questions requiring fine-grained geometric discrimination. Building on this finding, we develop adaptive interleaved reasoning, in which GeoUG first drafts an answer and then decides whether to generate geometric evidence to confirm or revise it. We train this decision through reinforcement learning, balancing accuracy gains over retaining the draft against generation cost. GeoUG achieves circular accuracies of 97.9%, 90.8%, and 94.2% on CV-Bench-3D, 3DCueBench, and DA-2K with fewer generation calls than always generating.

Recently, methods leveraging diffusion model priors to assist monocular geometric estimation (e.g., depth and normal) have gained significant attention due to their strong generalization ability. However, most existing works focus on estimating geometric properties within the camera coordinate system of individual video frames, neglecting the inherent ability of diffusion models to determine inter-frame correspondence. In this work, we demonstrate that, through appropriate design and fine-tuning, the intrinsic consistency of video generation models can be effectively harnessed for consistent geometric estimation. Specifically, we 1) select geometric attributes in the global coordinate system that share the same correspondence with video frames as the prediction targets, 2) introduce a novel and efficient conditioning method by reusing positional encodings, and 3) enhance performance through joint training on multiple geometric attributes that share the same correspondence. Our results achieve superior performance in predicting global geometric attributes in videos and can be directly applied to reconstruction tasks. Even when trained solely on static video data, our approach exhibits the potential to generalize to dynamic video scenes.